Hear from Our Customers
Whether you’re adding an outdoor kitchen on a half-acre lot, connecting a whole-home generator before the next PG&E shutoff season, or replacing aging black iron pipe in a home built in the ’70s the outcome you want is simple: it works, it’s safe, and it passes inspection without a callback.
Cameron Park’s housing stock tells a specific story. A large portion of the community was built between the 1960s and 1990s, which means corroded gas piping, undersized lines, and outdated connections are more common than most homeowners expect. When you’re sitting on a property worth $625,000 or more, unpermitted or improperly installed gas work isn’t a savings it’s a liability that shows up at the worst possible time, usually during a home sale.
Then there’s the outdoor living side of it. Cameron Park’s long, warm summers and larger lots make gas-powered fire pits, BBQ connections, and outdoor kitchens a natural extension of how people use their homes here. Getting that gas line run correctly properly sized, permitted through El Dorado County, and pressure-tested before inspection means you actually get to enjoy what you built. No leaks, no failed inspections, no do-overs.
We founded Murray Plumbing in 2009 as a C-36 licensed plumbing contractor based in El Dorado Hills which puts us about five minutes west of Cameron Park on US-50. This isn’t a franchise routing calls from a regional dispatch center. Ryan Murray’s name is on every job, and he’s been pulling permits through El Dorado County’s Building Division long enough to know how the process actually works including the Cameron Park Community Services District’s architectural review requirement that catches a lot of contractors off guard.
That local knowledge matters more than most people realize. Knowing which step comes before the county permit, understanding how El Dorado County fees are structured, and being familiar with the housing stock throughout Cameron Park’s subdivisions that’s the kind of experience that keeps your project on schedule and your inspection clean.
We’re BBB Accredited, hold a 5-star rating across Google, Yelp, HomeAdvisor, and Angi, and are fully licensed, bonded, and insured. Our free estimate means you find out exactly what you’re looking at before committing to anything.
It starts with a free estimate. We come out, assess the scope whether that’s a new line run for a gas range, an outdoor kitchen connection, a tankless water heater, or a generator hookup and give you a clear price before anything else happens. No diagnostic fee, no vague ballpark. You know what it costs before work begins.
Once you move forward, we pull the permit through El Dorado County’s Planning and Building Department. If your project involves exterior work that falls under the Cameron Park Community Services District’s CC&R rules, we handle that architectural review step before the county permit is submitted not after, which is where delays usually happen. Before any ground gets broken, 811 gets called to have underground utilities marked. Cameron Park was developed across several decades, and what’s buried isn’t always where you’d expect it.
The installation follows California’s plumbing code requirements correct pipe sizing, proper routing, and full pressure testing of every connection before the inspector arrives. Once the inspection passes, the permit closes. You get a completed job with documented county approval, which protects your home’s insurability and keeps your property records clean. That matters in a market where homes regularly sell for well above the county median.
Ready to get started?
Gas line installation in Cameron Park covers a wider range of projects than most homeowners initially think about. New appliance connections gas ranges, dryers, tankless water heaters, fireplaces are the most common starting point. But a significant share of calls in this area involve running new lines for outdoor kitchens and fire pits, connecting whole-home standby generators to natural gas, or replacing corroded black iron piping in homes that haven’t had their gas system looked at in 20 or 30 years.
All of it falls under the same standard: C-36 licensed installation, El Dorado County permit, mandatory pressure testing, and a closed inspection before the job is considered done. PG&E handles the gas service up to your meter everything from the meter into your home and out to your appliances is your responsibility, and it requires a licensed contractor. We handle the full scope, including load calculations to make sure a new generator or outdoor kitchen setup doesn’t starve your existing appliances of gas flow.
For Cameron Park homeowners in CC&R neighborhoods and there are over 80 of them administered by the Cameron Park Community Services District any exterior work may require ARC approval before El Dorado County issues the building permit. That step is built into our process, not an afterthought. Whether you’re in the Airpark Estates, near Cameron Park Lake, or anywhere else in the 95682 ZIP code, the process is the same: permitted, inspected, and done right.
Yes any gas line installation, replacement, or extension in Cameron Park requires a permit. Because Cameron Park is an unincorporated community in El Dorado County, those permits are issued by El Dorado County’s Planning and Building Department, not a city building department. That’s a distinction that matters, because the county’s process including fee structure, inspection scheduling, and plan review is different from what you’d encounter in an incorporated city like Folsom or Placerville.
Skipping the permit isn’t just a code violation. In California, unpermitted gas line work voids your homeowner’s insurance coverage for anything related to that work, and it becomes a documented problem when you sell. In a market where Cameron Park homes regularly list above $600,000, that’s not a risk worth taking. We pull the permit as a standard part of every job it’s not an add-on or an upsell, it’s how the work gets done correctly.
For most residential gas line installation projects, you’re looking at a range of roughly $271 to $936 based on 2025 national data but the actual cost depends heavily on what the job involves. A straightforward appliance connection on an existing line is on the lower end. Running a new line from the meter to an outdoor kitchen, or installing a dedicated line for a whole-home generator, is a more involved project that can run $1,000 to $3,000 or more depending on the distance, pipe sizing requirements, and what’s already in the ground.
Our free estimate gives you a specific number before any work starts not a range, not a ballpark. Verified customer reviews consistently note that the final cost matched or came in below the original estimate, which isn’t standard in this industry. El Dorado County permit fees, which include a Technology Fee, a General Plan Implementation Fee, and the state-mandated SMIP Fee, are factored into the quote so there are no line items that surprise you at the end.
The most frequent requests in Cameron Park fall into a few clear categories. Outdoor gas connections fire pits, gas BBQ lines, outdoor kitchens are consistently high-demand given the community’s large lots and long outdoor season. Whole-home generator hookups have grown significantly as PG&E’s Public Safety Power Shutoff program has made backup power a real priority for El Dorado County foothill residents. And aging infrastructure replacement is common throughout Cameron Park’s older subdivisions, where homes built in the 1960s through 1980s still have original black iron gas piping that’s well past its service life.
New appliance connections are also routine gas ranges, tankless water heaters, and gas dryers all require a proper line connection that meets current California code. If you’re doing a kitchen remodel, adding a gas appliance, or building out your backyard in Cameron Park, the gas line side of that project needs a C-36 licensed contractor who understands El Dorado County’s permit requirements and can get the inspection closed cleanly.
It can, depending on where your home is located and what the work involves. The Cameron Park Community Services District administers CC&R rules for more than 80 neighborhoods covering nearly 8,000 homes in the community. If your gas line project involves any exterior modification a visible pipe run, an outdoor appliance connection, changes to the exterior of the home the CPCSD’s Architectural Review Committee may need to review and approve the plans before El Dorado County will issue a building permit.
This is a step that catches a lot of homeowners and contractors off guard. If you submit your permit application to the county without completing the ARC review first, you’ll hit a delay that pushes your project timeline back. We’ve been working in El Dorado County since 2009 and understand how this two-step process works in Cameron Park. The ARC review is factored into the project timeline from the start, so it doesn’t become a surprise in the middle of your job.
Yes, and it’s one of the more involved gas line projects we handle in this area. Connecting a whole-home standby generator to natural gas isn’t just a matter of running a pipe from point A to point B. The gas line needs to be properly sized to deliver enough flow to run the generator without reducing pressure to your existing appliances furnace, water heater, range, and whatever else is on the system. That requires load calculations, not guesswork.
In Cameron Park and the broader El Dorado County foothills, PG&E’s PSPS program has made whole-home generators a serious investment for a lot of homeowners. If you’ve already purchased the generator or you’re in the planning phase, the gas line installation needs to be permitted through El Dorado County, pressure-tested, and inspected before the system goes live. We handle the full scope sizing, installation, permit, and inspection so your generator is actually ready when the power goes out, not still waiting on a callback.
Cameron Park’s housing stock includes a large number of homes built between the 1960s and 1990s, and many of those homes still have their original black iron gas piping. Black iron pipe corrodes over time, especially in foothill environments where temperature swings between dry summers and wet winters put stress on older materials. The signs that something needs attention aren’t always dramatic sometimes it’s a faint sulfur smell near an appliance, a pilot light that keeps going out, or a noticeable drop in gas pressure when multiple appliances are running at the same time.
If your home is more than 30 years old and the gas system has never been assessed, a professional inspection is worth doing before a problem surfaces on its own. We can evaluate the condition of your existing piping, identify sections that are corroded or undersized, and give you a clear picture of what replacement or repair would involve with a specific cost estimate, not a vague range. Catching a deteriorating gas line before it becomes an emergency is significantly less disruptive and less expensive than dealing with it after the fact.
Local Resources
