Hear from Our Customers
When gas line installation is done correctly permitted, pressure-tested, and sized for your actual setup you stop dealing with the problems that come from cutting corners. No appliances running weak because the line is undersized. No insurance gaps because the work was never inspected. No guessing whether what’s behind your walls is still safe.
For Sheridan homeowners, that matters more than most places. A lot of properties out here along SR-65 were built decades ago, and the gas infrastructure hasn’t always kept pace. Aging black iron pipe corrodes. Old connections that passed inspection 30 years ago may not meet today’s California Plumbing Code. When you add a new stove, a tankless water heater, or a line out to a workshop or detached structure, the existing system needs to be assessed not just tapped into and hoped for the best.
And if you’re on a larger rural parcel where propane has been the setup instead of PG&E natural gas, that’s a different conversation entirely but one we know well. Whether it’s a propane system upgrade, a new gas run to an outbuilding, or a full replacement of aging pipe, the outcome is the same: a system that works, passes inspection, and doesn’t become a problem down the road.
Murray Plumbing was founded in 2009 by Ryan Murray, who holds a California C-36 contractor’s license the specific credential state law requires for gas piping installation and repair. That’s not a general plumbing license with gas work tacked on. It’s the real credential, earned through years of journey-level experience and two state exams. Ryan has more than 24 years of hands-on experience, and his name is on every job.
Placer County is a core part of our service area not an afterthought. That means we’re familiar with Placer County Building Services, the permit process, and what inspectors out here actually expect. Sheridan is a small community, and the properties reflect that older homes near the historic townsite, larger rural parcels, agricultural land with outbuildings that need gas service. That’s not suburban tract work, and we handle it accordingly.
We’re BBB Accredited, fully licensed, bonded, and insured, with a 5-star reputation built on transparent pricing and showing up when it counts.
It starts with a free estimate. You describe what you’re working with a new appliance connection, a line extension to a detached structure, a full replacement of aging pipe and we give you a real number before anything starts. No $99 diagnostic fee just to hear a price. No vague ranges that balloon after the work begins.
Once the scope is confirmed and you’re ready to move forward, we handle the permit with Placer County Building Services. In Sheridan, gas line work falls under county jurisdiction not a city building department and navigating that process correctly matters. Unpermitted gas work in California is illegal, voids homeowner’s insurance, and can create serious problems when it comes time to sell. We pull the permit, coordinate the inspection, and make sure the work is on record the right way.
From there, the installation follows a clear sequence: existing line assessment, proper sizing for your appliances and run length, installation to current California Plumbing Code, and a full pressure test before anything is signed off. If the work involves any excavation running a line to a shop, a barn, or an outdoor kitchen area we call 811 first. On rural Sheridan properties where underground lines aren’t always well-documented, that step isn’t optional. When the county inspector signs off, you’re done with documentation that protects you.
Ready to get started?
We handle the full range of residential and commercial gas line installation work in Sheridan and throughout Placer County. New appliance connections stoves, dryers, tankless water heaters, fireplaces are the most common starting point. But a significant share of the work out here involves something more involved: running a new gas line to a detached garage or workshop, adding outdoor gas service for a fire pit or kitchen area, connecting a whole-home generator, or replacing deteriorated pipe on a property that hasn’t had the system touched in decades.
For properties where the existing infrastructure is aging, the process starts with an honest assessment. If what’s there can be extended safely and to code, that’s what we recommend. If the pipe is corroded, undersized, or installed in a way that no longer meets current standards, replacement is the right call and you’ll hear that clearly before any work starts, not buried in a bill after the fact.
Propane systems on rural Sheridan parcels are also part of the work we do. Whether you’re converting from propane to PG&E natural gas as service becomes available in your area, or you need gas piping work on an existing propane setup, the installation process and licensing requirements are the same. Every job regardless of scope includes proper sizing calculations, Placer County permit management, pressure testing, and a final inspection before the system goes live.
Yes and this isn’t something to skip. In Sheridan, gas line installation falls under Placer County Building Services jurisdiction, which means a permit is required before work begins, and the completed work must pass a county inspection before the system can be used. California state law also requires that all gas piping work be performed by a C-36 licensed contractor, regardless of whether the property is in an incorporated city or an unincorporated area like Sheridan.
The permit requirement exists for good reason. It ensures the work is pressure-tested, installed to current California Plumbing Code, and documented on record. If you ever sell your property, refinance, or file an insurance claim, unpermitted gas work can become a significant problem and in some cases, it means tearing out and redoing the work entirely. We handle the full permit process with Placer County, so you don’t have to navigate the county building department on your own.
The cost varies depending on what the job actually involves and that range is wide. A straightforward appliance connection or short line extension might fall in the $300–$700 range. A new gas line run to a detached structure, a full system replacement on an older Sheridan property, or a longer underground run on a larger rural parcel can run $1,500–$4,000 or more, depending on distance, materials, and permit fees.
What doesn’t change is how we quote work: you get a real number upfront, before anything starts. Our customers have consistently noted that final bills came in at or below the original estimate not the other way around. For Sheridan homeowners on a working-family budget, that kind of pricing clarity is the difference between moving forward with confidence and sitting on a problem because you’re afraid of what the bill might look like. The estimate is free, and there’s no obligation attached to it.
That’s exactly the right question to ask before any work starts and the answer depends on what’s already there. On older Sheridan properties, the existing gas line is often black iron pipe. Black iron is durable, but it corrodes over time, especially in areas with moisture exposure or where the pipe runs underground. If the pipe is showing rust, if fittings are compromised, or if the line is undersized for the appliances currently on the system, extension isn’t the right answer replacement is.
The other factor is capacity. If you’re adding a tankless water heater, a high-BTU range, or a gas connection to an outbuilding on top of what’s already running, the existing line may not be sized to handle the load. Running a new appliance on an undersized line causes performance issues and can create safety concerns. A proper assessment which we do before quoting any work looks at the existing pipe condition, the current load, and what the new installation requires, so you get a recommendation based on your actual situation rather than a default answer.
Yes, and this is one of the more common requests from Sheridan-area property owners. Larger rural parcels frequently have detached garages, workshops, barns, or agricultural structures that need gas service whether for heating, equipment, or a combination of uses. Running a gas line to an outbuilding involves a longer pipe run, often underground, and requires proper sizing to account for the distance and the appliances being served.
Before any excavation happens, we call 811 to have underground utilities marked. On rural Sheridan properties, underground lines irrigation, private water lines, and other utilities aren’t always well-mapped, and digging without locating them first is a real risk. The underground portion of the run also needs to use the correct pipe material and burial depth per California code. We manage the full project from trench to final inspection with Placer County Building Services so you’re not coordinating between multiple parties to get one job done.
Leave the building immediately don’t stop to turn off appliances, don’t flip any light switches, and don’t use your phone until you’re outside and away from the structure. Once you’re clear, call PG&E’s emergency line at 1-800-743-5000 and call 911 if you believe there’s an immediate danger. PG&E will shut off the gas at the meter and assess the situation.
After the utility has cleared the scene and identified the source, you’ll need a licensed C-36 contractor to inspect, repair, or replace the affected gas line before service can be restored. We offer 24/7 emergency response not an answering service, but actual dispatch around the clock. For Sheridan homeowners who are farther from Sacramento-area service hubs, knowing that a licensed contractor can be reached and dispatched the same night matters. Gas emergencies don’t follow business hours, and the geographic distance from the city shouldn’t mean you’re waiting until morning for a response.
Yes. Not every property in Sheridan has access to PG&E’s natural gas distribution network particularly on older or more rural parcels where the infrastructure was never extended. Many of those properties run on propane stored in on-site tanks, and the gas piping work on a propane system follows the same licensing requirements and code standards as natural gas work. A California C-36 license is required either way, and permits are still required through Placer County Building Services.
If you’re looking to convert from propane to natural gas as PG&E service becomes available in your area, that’s a project we handle as well. The conversion involves more than just switching out the meter connection appliances may need to be converted or replaced, the existing piping needs to be assessed for compatibility and condition, and the full system needs to be pressure-tested and inspected before it goes live. Whether you’re staying on propane and need new piping work, or you’re making the switch to natural gas, the process starts the same way: a free estimate, a clear scope, and no surprises on the back end.
Local Resources
