Hear from Our Customers
The most immediate thing you notice is that the hot water doesn’t run out. No more timing showers around each other, no more lukewarm water halfway through the dishes. A properly sized tankless unit delivers 5–10+ gallons per minute continuously matched to your home’s actual demand, not a builder’s best guess from 30 years ago.
For Loomis homeowners, that matters more than it might somewhere else. A large portion of homes here sit on acreage, run on private well water, and were built before 1999. That combination older gas infrastructure, variable water chemistry, and larger square footage puts real strain on a conventional tank heater. Tankless removes the tank entirely, which means no standby heat loss, no waiting for a 50-gallon reserve to recover, and no surprise failure flooding your garage on a January morning.
With nearly 25% of Loomis residents working from home, hot water demand doesn’t peak and drop it runs steady through the day. Field studies have shown up to 37% savings in water heating energy when switching from a tank to tankless. When your baseline usage is higher because you’re home all day, that percentage means more actual dollars back in your pocket every month.
We founded Murray Plumbing in 2009, starting from construction experience and building this company one job at a time. It’s not a franchise. There’s no call center routing your job to whoever’s available. When you call, you’re dealing with a team that’s been serving Placer County for years and knows the difference between a Rocklin tract home and a Loomis acreage property on a private well.
That distinction matters here. Homes along the I-80 corridor in Loomis aren’t cookie-cutter, and the plumbing work that goes into them shouldn’t be either. We carry full California licensing and insurance on every job, handle all Placer County Building Services Division permitting in-house, and give you a complete price before anyone touches a pipe.
Our 4.7/5 Google rating across 93 reviews didn’t come from a marketing campaign. It came from showing up on time, being straight about what the job costs, and not leaving until the work is done right.
It starts with an honest assessment of your home, not a sales pitch. Before anything is recommended or quoted, we evaluate your existing gas line size and pressure, your current venting setup, and your water quality. In Loomis, that last part is especially important hard water is a documented local issue, and for homes on private well water, the mineral content can vary significantly from property to property. That assessment protects your investment before the job even starts.
Once the right unit is confirmed and the full scope is clear including any gas line modifications or venting upgrades your home needs you get one complete, upfront price. No “we found something extra” after the work begins. We then pull the Placer County permit through the county’s online portal, which is required for every water heater replacement in Loomis under California Plumbing Code. You don’t fill out forms or call the county. That’s handled.
Installation typically takes four to six hours. After the unit is in, the system is tested, inspected, and confirmed before we leave. You end the day with hot water on demand, a permitted installation on record, and no loose ends.
Ready to get started?
Every tankless water heater installation through Murray Plumbing includes the full scope unit, labor, venting, and all Placer County permit fees. If the pre-install assessment identifies that your gas line needs to be upgraded to handle the new unit’s demand (common in Loomis homes built before 1999, which make up the majority of the local housing stock), that work is quoted upfront and included in the final price. There are no line items that appear after the job is underway.
For properties on private well water a common situation in Loomis, particularly on acreage lots the assessment also evaluates water quality conditions that affect long-term performance. Hard water scale buildup is the leading cause of early tankless failure in this area, and addressing it from the start, whether through a maintenance plan or a compatible water treatment recommendation, is part of doing the job correctly.
The installed unit is sized to your home’s actual peak demand. A larger Loomis property with multiple bathrooms, livestock, or high daily usage needs a different unit than a smaller home and getting that sizing right is what determines whether the system performs for 20+ years or starts causing problems in five. Every install is backed by our workmanship guarantee and full manufacturer warranty support.
Yes a permit is required for every water heater replacement in Loomis, no exceptions. This falls under California Plumbing Code, and Placer County Building Services Division enforces it locally. The permit process involves pulling the permit before work begins, completing the installation to code, and passing a post-installation inspection.
Skipping the permit isn’t just a technicality. If an unpermitted installation causes water damage or fire in your home, your homeowner’s insurance carrier may deny the claim. For a Loomis property where mean home values for detached houses approach $900,000 that’s not a risk worth taking to save a few hundred dollars. We handle the entire permit process through Placer County’s online portal as a standard part of every installation. You don’t make a single call to the county or fill out a single form.
For most Loomis homeowners, a complete tankless water heater installation unit, labor, venting, and Placer County permit runs somewhere between $1,400 and $3,895, with the national average landing around $2,629. Where your job falls in that range depends on the unit size required, your existing venting configuration, and whether your gas line needs to be upgraded.
That last factor is worth understanding before you get any quote. Many Loomis homes were built before 1999 and were designed around conventional tank heaters, which have lower gas demand than modern tankless units. If your gas supply line is undersized which is common in older Placer County foothill homes upgrading it adds roughly $1,500 to $2,500 to the total. We identify this during the pre-installation assessment and include it in your upfront quote. You know the full number before anything starts, not after.
Hard water is a real and documented concern in the Loomis area it’s a genuine maintenance consideration. Water with elevated calcium and magnesium content causes mineral scale to build up inside a tankless unit’s heat exchanger over time. That buildup forces the unit to work harder to reach target temperatures, reduces efficiency, and can eventually cause overheating or premature failure. It’s the single most common reason tankless systems underperform in the Placer County foothills.
The good news is that it’s entirely manageable when addressed from the start. Annual descaling maintenance keeps the heat exchanger clean and extends the unit’s lifespan significantly. For Loomis homes on private well water where mineral content can vary considerably from property to property a water quality assessment before installation helps determine whether a compatible water treatment solution makes sense alongside the new unit. We evaluate water conditions as part of every install and give you a clear picture of what ongoing maintenance looks like for your specific home.
Yes, and we do it regularly on Loomis acreage properties but the process requires a bit more upfront evaluation than a standard municipal water hookup. Well water chemistry in the Placer County foothills varies from property to property, and that variability affects which unit is the right fit and what maintenance schedule makes sense going forward.
The key factors are water hardness, pH, and mineral content. A water quality assessment before installation isn’t optional on a well-water property it’s how you protect a $2,000+ investment from failing in a fraction of its expected lifespan. We conduct this evaluation as a standard part of the pre-installation process for Loomis properties on private wells. The goal is to make sure the unit you’re installing is compatible with your actual water conditions, not just the conditions on a spec sheet.
For most Loomis homes, installation takes between four and six hours from start to finish. That window covers removing the old unit, making any necessary gas line or venting modifications, installing the new tankless system, and testing everything before we leave. If your home requires a gas line upgrade which is common in older Loomis properties that weren’t originally plumbed for a tankless unit’s higher gas demand that work is completed the same day when possible.
We handle most water heater calls the same day they come in, including full installations when parts are available. If your current water heater has already failed and you’re without hot water, that’s exactly the kind of call we prioritize. Our 24/7 availability means you’re not waiting through a weekend or scheduling a window three days out you get a real response when you need one.
A properly installed and maintained tankless water heater has a life expectancy of 20 years or more roughly double the 8–12 year lifespan of a conventional tank heater. Over the course of owning a Loomis home, that means you’re likely avoiding one or two full replacement cycles, along with the installation costs, permit fees, and disruption that come with each one.
The caveat in Loomis specifically is water quality. Hard water and the variable mineral content common in well-water properties can shorten that lifespan considerably if the unit isn’t maintained. Annual descaling, combined with a water treatment setup appropriate for your property’s water chemistry, keeps the heat exchanger clean and the system running efficiently for the long haul. When the installation is done correctly from the start right unit size, proper gas line, addressed water conditions 20+ years is a realistic and achievable outcome for a Loomis home.
Local Resources
