Hear from Our Customers
A traditional tank water heater works against you in a Folsom winter. When overnight temperatures drop and your system is pulling cold Sierra Nevada snowmelt from Folsom Lake, an aging tank is already working at its limit and that’s exactly when they fail. A tankless system heats water on demand, so there’s no stored tank to exhaust, no standby energy loss, and no cold-shower emergency at 6 AM before your commute.
The energy savings are real and documented. Field studies show households switching from tank to tankless cut their water heating costs by up to 37%. For a Folsom home with multiple bathrooms and a family that actually uses them all, that adds up fast and unlike a tank that needs replacing every 8 to 12 years, a properly maintained tankless unit can last 20 years or more.
Larger homes in Empire Ranch, Broadstone, and the newer Folsom Ranch developments are exactly the kind of properties that benefit most. High hot water demand, newer gas infrastructure, and long-term homeownership all point in the same direction. A tankless installation here isn’t just a repair it’s an upgrade that pays for itself.
Murray Plumbing was founded in 2009 by Ryan Murray, a licensed tradesman who started the company after a career in construction. No franchise, no inherited customer list just a truck, a license, and a commitment to doing the work right. Today, we hold a 4.7 out of 5 Google rating across 93 reviews, and appear on Yelp’s list of top-rated plumbers in Folsom, CA 95630.
We are a California C-36 licensed, bonded, and fully insured plumbing contractor serving Sacramento County homeowners, including Folsom and the surrounding communities. Every technician on every job is a direct employee not a subcontractor.
The reviews tell the same story consistently: we showed up the same day, the price matched what was quoted, and the job was done right the first time. That’s not a pitch it’s a track record built over 15 years of showing up for Folsom homeowners when it mattered.
It starts with a call or a message. We respond fast often same-day and the first conversation is focused on understanding your home’s setup, not selling you something. If you’re in Folsom Ranch with a newer build, the gas infrastructure is likely already sized for a tankless conversion. If you’re in an older home near Historic Folsom, there may be a gas line upgrade involved. Either way, you’ll know the full cost before any work begins.
Once the scope is confirmed and the price is agreed on, we pull the required permit from the City of Folsom Building Department on your behalf. Under California Plumbing Code, a permit is legally required for every water heater replacement in Sacramento County and a final inspection is required after the work is complete. We handle all of it. You don’t call the permit office, you don’t schedule the inspector, and you don’t worry about whether the installation is code-compliant. It is.
The installation itself typically takes a few hours. Your new tankless unit is mounted, vented, connected to the gas supply, and tested before our technician leaves. The inspector signs off, and you’re done with a system that’s fully permitted, properly installed, and built to run for the next 20 years.
Ready to get started?
Every tankless water heater installation we perform in Folsom includes a full assessment of your home’s existing gas supply, venting configuration, and water inlet conditions before anything is recommended. Folsom’s water comes entirely from Folsom Lake Sierra Nevada snowmelt that runs through the city’s treatment plant before reaching your home. It’s relatively clean water, but it still carries enough mineral content to require annual descaling of the heat exchanger. We factor that into every recommendation and can walk you through a maintenance schedule that keeps your system running at full efficiency.
All units we install are compliant with the 2024 DOE efficiency standards for gas-fired tankless water heaters the most current federal requirements in effect. This matters for Folsom homeowners because non-compliant units can no longer be legally installed, and an installation that skips the permit process skips the inspection that confirms your system meets those standards. In a city where the average home is valued at over $755,000, an unpermitted installation is a liability your homeowner’s insurance may not cover.
We also handle gas line upgrades when the existing supply line isn’t sized for a tankless unit which typically adds between $1,500 and $2,500 to the project. If that’s the case for your home, you’ll know upfront. No surprises on the invoice, and no work starts until the full scope and total cost are agreed on.
Yes and it’s not optional. California Plumbing Code Section 502.1 requires a permit for every water heater installation or replacement in Sacramento County, which includes Folsom. The City of Folsom Building Department at 50 Natoma Street issues these permits, and a final inspection is required after the work is completed to confirm the installation meets current code.
This matters more than most homeowners realize. A water heater installed without a permit hasn’t been inspected for seismic strapping compliance, proper venting, or gas line sizing all of which are required under California code. If something goes wrong with an unpermitted installation, your homeowner’s insurance can deny the claim. We pull every required permit and schedule the inspection as a standard part of every job. You don’t have to navigate the City of Folsom’s ePermit system or make a single call to the permit office it’s already handled.
Most tankless water heater installations in Folsom fall between $1,400 and $3,895, with the average landing around $2,600. The range depends on the unit selected, the complexity of the venting configuration, and whether your existing gas supply line needs to be upgraded to support the new system.
Gas line upgrades are the most common variable cost. If your Folsom home particularly an older property near Historic Folsom or a home that previously ran an electric tank doesn’t have a gas supply line sized for a tankless unit, that upgrade typically adds $1,500 to $2,500 to the total. We assess your home’s infrastructure before recommending anything, and the full project cost is confirmed before work begins. What’s quoted is what you pay some customers have noted the final bill came in under the original estimate.
Folsom gets 100 percent of its drinking water from Folsom Lake, which is fed by Sierra Nevada snowmelt and treated at the city’s water treatment facility. Compared to Sacramento’s significantly harder water, Folsom’s supply is on the softer end but it still contains enough dissolved minerals to cause gradual buildup inside a tankless unit’s heat exchanger if the system isn’t maintained.
That buildup reduces efficiency and, if left unchecked, can shorten the unit’s lifespan. Annual descaling flushing the heat exchanger with a mild descaling solution is the standard maintenance practice for tankless systems in this area. It’s a straightforward service that takes less than an hour and keeps the unit running at the efficiency level it was installed at. We can walk you through a maintenance schedule at the time of installation so you know exactly what’s needed and when.
Not always but it depends on your home’s existing gas supply configuration. Many homes in Folsom’s newer developments, including Broadstone, Empire Ranch, and Folsom Ranch, already have gas lines sized to support a tankless conversion without additional work. These neighborhoods were largely built in the 1990s through the 2010s with modern gas infrastructure, which makes the upgrade path straightforward and often cost-effective.
Older homes in Folsom, or properties that previously used electric tank water heaters, are more likely to need a gas line upgrade. Tankless units require a higher BTU input than conventional storage tanks, and if the existing supply line can’t deliver adequate gas flow, the unit won’t perform correctly. We evaluate your home’s gas supply as part of the initial assessment before any recommendation is made. If an upgrade is needed, you’ll know the cost upfront. If it isn’t, you won’t be told it is.
For most Folsom homes, the physical installation takes between two and four hours. That includes removing the old unit, mounting and connecting the new tankless system, completing the venting, and testing the unit before our technician leaves. If a gas line upgrade is part of the project, add a few hours to that estimate.
Same-day installations are available in most cases. We respond quickly to water heater calls across Folsom including emergency replacements when a tank fails overnight or over the weekend. The permit is pulled before the work begins, and the final inspection with the City of Folsom is scheduled as part of the process. From your first call to a fully operational, code-compliant system, most customers are back to normal the same day they reach out.
For most Folsom homeowners, yes and the math is fairly straightforward. A conventional tank water heater lasts 8 to 12 years and carries standby energy losses around the clock, even when no one is using hot water. A tankless system eliminates that entirely, and field studies show households switching to tankless cut their water heating energy costs by up to 37%. Over 20-plus years of use, that’s a meaningful difference.
Folsom’s specific conditions make the case stronger. Homes in this area tend to be larger, with higher hot water demand across multiple bathrooms exactly the scenario where a tankless system’s on-demand delivery outperforms a tank. Folsom’s cold winter water temperatures from Folsom Lake also mean a conventional tank is under maximum stress during the months it’s needed most. A properly sized tankless unit handles that load without running out. Add in the federal energy efficiency tax credits currently available for qualifying high-efficiency installations, and the upfront cost becomes easier to evaluate against the long-term return.
Local Resources
