Hear from Our Customers
If your Isleton home was built between 1995 and 2007, there’s a real chance you have Kitec plumbing. And if you do, you’re living on borrowed time.
Kitec pipes don’t age gracefully. The brass fittings corrode from the inside out, weakening until they burst without warning. That’s not a scare tactic—it’s what happens when dezincification eats through the metal. You won’t get a slow drip as a heads-up. You’ll get a flood, often while you’re at work or asleep.
Insurance companies know this. That’s why some won’t cover homes with Kitec anymore, and others jack up your premiums or give you 60 days to replace it. If you’re trying to sell, buyers will either walk away or demand a price cut that wipes out your equity.
Kitec repair in Isleton, CA means getting ahead of the failure, not reacting to it. It means protecting your home’s value, keeping your insurance intact, and sleeping without wondering if tonight’s the night your pipes let go. That’s what matters—and that’s what we handle.
We’ve been serving the greater Sacramento region for over 24 years. We’re licensed, insured, and locally trusted—not because we say so, but because homeowners keep calling us back.
Isleton’s a small town, and word travels fast. You need a plumber who shows up on time, explains what’s wrong in plain English, and doesn’t inflate the bill when you’re in a bind. That’s how we’ve built our reputation, one job at a time.
We’ve seen Kitec plumbing problems in homes all over Sacramento County. We know how these systems fail, what it takes to replace them properly, and how to do it without tearing your life apart in the process. When you call, you’re getting someone who’s done this before—and who’ll do it right.
First, we come out and inspect your plumbing system. We’ll identify whether you have Kitec, where it’s installed, and what condition it’s in. This is a free estimate—no games, no pressure.
If you’ve got Kitec, we’ll walk you through your options. In most cases, the right move is full replacement with copper piping. Copper doesn’t corrode like Kitec’s brass fittings, and it’s what insurance companies and home inspectors want to see. We’ll map out the scope of work, timeline, and cost so you know exactly what you’re signing up for.
Once you’re ready to move forward, we schedule the job and get to work. Depending on your home’s size and layout, replacement typically takes one to three days. We’ll shut off water to the affected areas, remove the old Kitec lines, and install new copper pipes and fittings. Before we leave, we pressure-test everything to make sure it’s solid.
You’ll get documentation of the work for your records—and for your insurance company or future buyers. That paper trail matters, and we make sure you have it.
Ready to get started?
When you hire us for Kitec repair in Isleton, CA, you’re getting more than just a pipe swap. You’re getting a licensed plumber who knows the local building codes, the insurance requirements, and the fastest way to get your home back to safe and sellable.
We handle the full replacement—removing every inch of Kitec pipe and brass fitting, installing durable copper throughout, and testing the system under pressure to confirm there are no weak points. You’ll also get a detailed invoice and documentation that proves the work was done by a licensed contractor. That’s critical if your insurance company is breathing down your neck or if you’re preparing to list your home.
Isleton’s housing stock skews older, with many homes built during the decades when Kitec was widely installed. If you’re in one of those homes, you’re not alone—and you’re not overreacting by wanting this fixed. The risk is real, the timeline is now, and the cost of waiting is almost always higher than the cost of acting.
We also offer 24/7 emergency plumbing service. If a Kitec pipe bursts in the middle of the night, we’ll get someone out fast to stop the water, assess the damage, and start the repair. Speed matters when your home is flooding, and we don’t make you wait until Monday morning.
Replacement costs typically range from $5,000 to $15,000, depending on the size of your home and how much Kitec piping needs to be removed. A smaller home with Kitec only in the water heater area will cost less than a larger home with Kitec running throughout the walls and ceilings.
We give you a free estimate upfront so there are no surprises. We’ll assess your specific situation, measure the scope of work, and give you a clear number before any tools come out. Some companies charge for estimates—we don’t.
Keep in mind that the cost of replacement is almost always less than the cost of water damage from a burst pipe. We’ve seen homeowners face tens of thousands in repairs after a Kitec failure, plus the headache of dealing with insurance claims, displaced families, and ruined belongings. Replacing it now is the cheaper move.
Most insurance companies won’t pay to replace Kitec pipes as a preventive measure—they see it as a maintenance issue, not a covered loss. However, if a Kitec pipe has already burst and caused water damage, your policy may cover the damage itself, though not necessarily the cost to replace the plumbing system.
Here’s the bigger problem: many insurers are now refusing to renew policies on homes with Kitec, or they’re charging significantly higher premiums. Some give homeowners a 60-day deadline to replace the system or lose coverage altogether. If you’re in that situation, you don’t have time to wait.
Even if your insurer hasn’t flagged it yet, having Kitec in your home is a liability. When you go to sell, buyers’ insurance companies will catch it during underwriting, and the deal can fall apart fast. Replacing it now keeps your options open and your coverage intact.
Kitec pipes are usually orange or blue, and the fittings are brass-colored. You’ll most commonly find them near your water heater, under sinks, or running through your basement or crawl space. The pipes are often labeled with “Kitec” or “KTC” printed on the side.
If your home was built or renovated between 1995 and 2007, there’s a strong chance Kitec was used. It was popular with builders during that window because it was cheap and easy to install. Thousands of homes across the Sacramento area have it.
If you’re not sure, we can come out and inspect your plumbing system for free. We’ll identify whether you have Kitec, where it’s located, and what kind of shape it’s in. Even if you’re not ready to replace it immediately, knowing what you’re dealing with is the first step.
You can patch a leaking Kitec fitting, but it’s a temporary fix at best. The problem isn’t just one bad fitting—it’s the entire system. Kitec’s brass fittings fail because of dezincification, a chemical process that weakens the metal over time. If one fitting is failing, the others are right behind it.
Replacing just the damaged section doesn’t address the underlying issue. You’ll end up chasing leaks every few months as different fittings give out. It’s like putting a band-aid on a broken bone—it might stop the bleeding, but it doesn’t fix the problem.
Full replacement with copper piping is the only permanent solution. Copper doesn’t have the same corrosion issues, it’s approved by insurance companies, and it adds value to your home instead of scaring off buyers. If you’re going to invest in fixing the problem, do it once and do it right.
Most Kitec replacements take between one and three days, depending on the size of your home and how much piping needs to be swapped out. A straightforward job in a smaller home can often be done in a day. Larger homes with Kitec running through multiple floors or hard-to-reach areas take longer.
We’ll give you a timeline during the estimate so you can plan accordingly. You’ll need to be without water in certain areas of the home while we work, but we do everything we can to minimize disruption. If you need water access for specific hours—say, mornings before work or evenings for kids—we’ll work around that when possible.
Once the job’s done, you’ll have a fully functional plumbing system that’s built to last. We pressure-test everything before we leave, and we clean up after ourselves. You’re not left with a mess or a half-finished project.
If a Kitec pipe bursts, you need to act fast. Shut off your main water supply immediately to stop the flooding, then call us. We offer 24/7 emergency plumbing service in Isleton, CA, and we’ll get someone out as quickly as possible to assess the damage and start repairs.
Water damage spreads fast. The longer water sits, the more it soaks into drywall, flooring, and insulation. You’re looking at potential mold growth, structural damage, and a much bigger repair bill. Speed is everything.
Once we’ve stopped the immediate problem, we’ll walk you through the next steps—whether that’s a full Kitec replacement or a temporary repair to buy you time. Either way, you’ll know exactly what needs to happen and what it’s going to cost. We don’t sugarcoat it, and we don’t disappear after the emergency is over.
Local Resources
Other Services we provide in Isleton
