Kitec Repair in McClellan Park, CA

Stop Waiting for Your Pipes to Burst

If your McClellan Park home was built between 1995 and 2007, you’re living with a plumbing system on borrowed time—and we can fix it before it fails.

Hear from Our Customers

Kitec Plumbing Services McClellan Park

What Happens When You Replace Kitec Now

You stop wondering if today’s the day your pipes burst. You stop worrying about insurance companies dropping your coverage or jacking up your premiums because of a known defect in your walls.

Kitec plumbing problems don’t announce themselves with a slow drip. They show up as a burst pipe flooding your kitchen at 2 a.m., ruining floors, cabinets, and drywall. The failure rate isn’t just high—it’s inevitable. Industry experts don’t ask if Kitec will fail. They ask when.

Replacing it now means you’re not scrambling for an emergency plumber while water pours into your home. It means you’re not filing claims, dealing with restoration crews, or explaining to your insurance company why you waited. You get a reliable plumbing system, stable insurance coverage, and the ability to sell your home without scaring off every buyer who’s done their homework.

Kitec Pipe Repair McClellan Park

We've Been Fixing This Exact Problem for Years

We’ve spent over 24 years handling plumbing emergencies and full system replacements across Sacramento County, including McClellan Park. We’re a family-owned company, licensed and insured, with a 4.7-star Google rating based on 93 reviews.

What that really means: we show up when we say we will, we give you a straight answer about what needs to happen, and we don’t inflate the bill. Our customers consistently mention our response times and the fact that final costs often come in under the original estimate.

McClellan Park homeowners dealing with Kitec aren’t just facing a plumbing issue—they’re facing an insurance headache and a home value problem. We understand that, and we treat it like the urgent situation it is. That’s why we offer 24/7 emergency service and free estimates, so you can make an informed decision without getting hit with surprise fees.

Kitec Leak Repair McClellan Park

Here's What Actually Happens During Replacement

First, we assess your entire system—not just the problem area. Kitec was used for both hot and cold water lines, and if one section is failing, the rest isn’t far behind. We map out where the pipes run, identify access points, and give you a clear estimate based on your home’s size and layout.

Then we replace the system with copper piping, which is what should have been installed in the first place. Depending on your home, this might mean opening walls or working through existing access points. We coordinate the work to minimize disruption and keep you informed at every step.

Once the new system is in, we test it, inspect it, and make sure everything is sealed and code-compliant. You’ll have documentation showing the work was done by a licensed plumber, which matters when you’re dealing with insurance companies or selling your home. The whole process typically takes a few days for a full replacement, but if you’re dealing with an active leak, we can get someone out the same day to stop the damage and plan the next steps.

Ready to get started?

Explore More Services

About Murray Plumbing

Get a Free Consultation

Kitec Plumbing Problems McClellan Park

What You're Actually Paying to Fix

Kitec fails because the fittings corrode from the inside. The brass dezincifies when it comes in contact with water, especially in areas with hard water like Sacramento County. The pipes themselves can also degrade, but it’s usually the fittings that burst first—suddenly, and without warning.

In McClellan Park, homes built or renovated during the late ’90s and early 2000s are the most at risk. If you’ve got orange or blue pipes with brass fittings stamped “Kitec” or “KTC,” you’ve got the problem. Some homeowners try to patch leaks as they happen, but that’s just delaying the inevitable. One-off repairs add up fast, and they don’t solve the underlying issue.

A full replacement costs anywhere from a few thousand dollars for a smaller home to tens of thousands for larger properties with plumbing running through multiple floors. That sounds like a lot until you compare it to the cost of water damage, which can easily hit $20,000 or more after you factor in restoration, mold remediation, and lost belongings. And if your insurance won’t cover it because they warned you about Kitec, you’re paying for all of it.

A construction worker in an orange hard hat and safety gear installs or repairs plumbing pipes inside a building, using tools and focusing on a blue and red pipe system in El Dorado County, CA

How do I know if my McClellan Park home has Kitec plumbing?

Check your exposed pipes—usually in the basement, crawl space, or near your water heater. Kitec pipes are typically orange (hot water) or blue (cold water), and the fittings are brass-colored with “Kitec” or “KTC” stamped on them.

If your home was built or had plumbing work done between 1995 and 2007, there’s a chance Kitec was installed. It was widely used during that period because it was cheaper and easier to install than copper. If you’re not sure, we can come out and inspect your system during a free estimate. It takes about 20 minutes to identify, and it’s worth knowing before you’re dealing with a burst pipe.

You can, but it won’t solve the problem. Kitec fails because of a manufacturing defect—the fittings corrode from the inside, and the pipes degrade over time. If one section is leaking, the rest of your system is under the same stress and will fail soon.

We’ve seen homeowners spend thousands on multiple repairs over a couple of years, only to end up replacing the whole system anyway. By that point, they’ve also dealt with water damage, insurance claims, and the stress of repeated emergencies. A full replacement costs more upfront, but it’s the only way to actually fix the issue. If you’re on a tight budget, we can discuss phased replacement options, but patching leaks is just buying time—not much of it.

Probably not. Most insurance policies cover sudden, accidental damage—but not damage caused by a known defect you didn’t fix. Since Kitec was recalled in 2005 and the problems are well-documented, insurers consider it a maintenance issue, not a covered event.

Some insurance companies in California have started refusing to cover homes with Kitec at all, or they’ll raise your premiums significantly to offset the risk. If you’re trying to get new coverage or renew your policy, the presence of Kitec can be a dealbreaker. The good news: once you replace it, that problem goes away. You’ll have documentation from a licensed plumber showing the work was done, which can help you secure better coverage and potentially lower your premiums.

If you’re dealing with an emergency leak, we can usually get someone out the same day to stop the water and stabilize the situation. That might mean shutting off a section of your plumbing or doing a temporary repair to prevent further damage.

A full system replacement typically takes two to five days, depending on the size of your home and how accessible the plumbing is. Single-story homes with plumbing in the crawl space or attic are faster. Multi-story homes where pipes run through walls and floors take longer because we need to open access points, replace the lines, and then patch and finish the walls. We work efficiently and keep disruption to a minimum, but we don’t cut corners. You’ll have a reliable system when we’re done, and that’s worth a few days of inconvenience.

It depends on your home’s size, layout, and how much of the system needs replacing. Smaller homes might run a few thousand dollars. Larger homes with plumbing on multiple floors can reach $10,000 to $20,000 or more.

That’s a wide range, which is why we offer free estimates. We’ll assess your specific situation, map out the work, and give you a transparent quote with no hidden fees. Some customers have told us the final bill came in lower than the estimate, which doesn’t happen often in this industry—but it’s how we operate. Compare that cost to the potential damage from a burst pipe (often $20,000+), plus the hassle of dealing with insurance, contractors, and living in a construction zone for weeks. Replacement isn’t cheap, but it’s a lot cheaper than the alternative.

Yes. Informed buyers know what Kitec is, and they’ll either walk away or demand a price reduction to cover replacement costs. Home inspectors flag it immediately, and it becomes a negotiating point that works against you.

Even if a buyer is willing to move forward, their lender might require the issue to be fixed before approving the loan. Some insurance companies won’t cover homes with Kitec, which means the buyer can’t close. If you’re planning to sell in the next few years, replacing Kitec now removes a major obstacle and protects your home’s value. If you’re staying put, it protects your investment and eliminates a serious liability. Either way, it’s not a problem that gets better with time.

Other Services we provide in Mcclellan Park