Hear from Our Customers
You already know something’s wrong. Maybe your insurance company sent a letter. Maybe you’re trying to sell and a buyer’s inspector flagged it. Or maybe you just learned your home was built between 1995 and 2007 and you’re wondering if you’re sitting on a ticking time bomb.
You are. Kitec plumbing problems in Pleasant Valley, CA aren’t rare—they’re inevitable. The brass fittings corrode from the inside out. The pipes degrade faster than they should. And when they go, they don’t drip. They burst.
Most homeowners don’t find out until there’s water pouring through the ceiling. By then, you’re looking at thousands in water damage on top of the Kitec pipe repair itself. Insurance companies know this, which is why many won’t cover Kitec-related claims anymore. Some won’t even insure homes that still have it.
Getting ahead of this isn’t paranoia. It’s the smartest move you can make. A full Kitec plumbing services replacement protects your home’s value, keeps your insurance valid, and gives you actual peace of mind—not the kind you fake while hoping nothing breaks.
We’ve been handling plumbing emergencies and full system replacements across El Dorado County since 2001. We’re not new to Kitec leak repair in Pleasant Valley, CA—we’ve been pulling this stuff out of homes for years.
Our crews are licensed, insured, and trained specifically on how to handle Kitec systems safely. That matters more than you’d think. A lot of plumbers don’t know the right way to disconnect these fittings without causing more damage.
We show up when we say we will. We give you a clear estimate before we start. And if the final number comes in lower than we quoted—which happens more often than you’d expect—that’s what you pay. No gimmicks. Just fast, reliable work that actually solves the problem.
First, we come out and do a full inspection of your plumbing system. We’re looking for Kitec pipes, fittings, and any signs of corrosion or leaks that haven’t burst yet. You’ll know exactly what you’re dealing with before we talk numbers.
Then we walk you through your options. Most of the time, a full repipe is the right call—especially if you’re planning to stay in the home or sell it anytime soon. We typically replace Kitec with PEX or copper, depending on your home’s layout and your budget.
The actual work moves fast. We shut off water to the affected areas, remove the old Kitec system, and install new piping that meets current code. If it’s a whole-house job, we work in stages so you’re not without water for days. Once it’s done, we test everything, clean up, and make sure your insurance company has the documentation they need.
You’re left with a system that works, a home that’s insurable, and one less thing to worry about.
Ready to get started?
When we handle Kitec plumbing services in Pleasant Valley, CA, you’re getting more than just new pipes. You’re getting a system that won’t fail in five years, won’t scare off buyers, and won’t get your insurance policy dropped.
We replace all Kitec piping—hot and cold lines, supply lines to fixtures, and any Kitec water heater plumbing connections. We use materials that are proven, code-compliant, and built to last decades, not years. PEX and copper don’t have the same corrosion issues that made Kitec such a disaster.
Pleasant Valley homes built in the early 2000s are prime candidates for this work. A lot of developments in El Dorado County used Kitec during that window, and most homeowners had no idea until recently. If your home was built or repiped between 1995 and 2007, there’s a real chance you’ve got it.
We also handle Kitec leak repair for emergencies—but honestly, if one section is failing, the rest isn’t far behind. Patching a leak might buy you time, but it won’t fix the underlying problem. Most people who call us for a quick fix end up scheduling the full replacement once they understand what they’re up against.
Check your water heater, under sinks, and in your attic or crawl space. Kitec pipes are usually marked with “Kitec” or “PlumbBetter” on the pipe itself. The pipes are often orange or blue, though some are black or gray.
The fittings are brass and tend to look a little different than standard copper fittings—they’re bulkier and often have a yellowish tint. If your home was built or remodeled between 1995 and 2007, and you see any of these signs, you likely have Kitec.
If you’re not sure, we can come out and do a free inspection. It takes about 20 minutes and you’ll have a definitive answer. Most people don’t realize they have it until they’re selling the house or filing an insurance claim, and by then it’s a much bigger headache.
Probably not. Most homeowner policies specifically exclude damage caused by Kitec failures, and many insurance companies in California won’t even write new policies for homes with known Kitec systems.
If you’re trying to renew your policy and your insurer finds out you have Kitec, they may refuse to renew or significantly increase your premium. Some will give you a deadline to replace it or they’ll drop your coverage entirely.
The good news is that once you replace the system and provide proof of the work, your insurability goes back to normal. We give you all the documentation you need to show your insurance company that the Kitec is gone and your plumbing is up to code. That alone can save you thousands in higher premiums or denied claims down the road.
It depends on how much Kitec you have and whether you’re doing a partial repair or a full replacement. A whole-house repipe typically runs between $4,000 and $10,000, depending on the size of your home and how accessible the pipes are.
That might sound like a lot, but compare it to the cost of a burst pipe: water damage alone can easily hit $10,000 to $20,000, and that’s before you factor in the Kitec replacement you’ll still need to do anyway. Plus, if your insurance won’t cover it, you’re paying out of pocket for everything.
We give free estimates and we’re upfront about pricing. No surprises, no upselling. You’ll know what it costs before we start, and if we finish under budget, that’s what you pay. A lot of our Pleasant Valley customers tell us the final bill came in lower than they expected, which doesn’t happen often in this industry.
You can, but it’s a short-term fix. If one section of Kitec is leaking, the rest of your system is degrading at the same rate. Patching one leak doesn’t stop the corrosion happening inside the fittings and pipes throughout your house.
We’ve seen plenty of homeowners do a quick repair, only to have another leak pop up a few months later. Then another. Eventually, you’re paying for multiple service calls and still facing the inevitable full replacement.
If you’re planning to sell soon or you just need to buy a little time, a repair might make sense. But if you’re staying in the home or trying to close a real estate deal, replacing the whole system is the smarter move. It’s one cost, one project, and it’s done. No more waiting for the next leak.
Most whole-house repipes take two to four days, depending on the size of your home and how the plumbing is routed. Single-story homes with accessible crawl spaces go faster. Two-story homes with plumbing in the walls take a bit longer.
We work in stages so you’re not completely without water the entire time. We’ll repipe one section, test it, then move to the next. You’ll have limited water access during the day, but we make sure you’ve got working toilets and sinks by the time we leave each evening.
Once the new pipes are in, we pressure-test the system, patch any drywall we had to open, and clean up the work area. You’ll also get all the permits and inspection sign-offs you need, plus documentation for your insurance company. From start to finish, it’s faster and less disruptive than most people expect.
Replace it before you list, or be ready to negotiate a big chunk off your sale price. Buyers’ inspectors will flag Kitec every time, and most buyers will either walk away or demand a credit that’s often more than the replacement would’ve cost you.
Lenders are also getting stricter. Some won’t approve loans for homes with Kitec still installed, which kills deals even when buyers are willing to move forward. You’re better off handling the replacement yourself so you can control the cost and the timeline.
We’ve worked with dozens of Pleasant Valley homeowners who were in the middle of a sale and needed the work done fast. We can usually get you scheduled within a few days and finish the job in under a week. Once it’s done, your home is easier to sell, worth more, and you’re not stuck renegotiating after inspection. It’s one of those things that pays for itself in the deal.
Local Resources
Other Services we provide in Pleasant Valley
