Hear from Our Customers
If your Kings Beach home was built between 1995 and 2007, there’s a real chance you have Kitec plumbing. And if you do, the question isn’t if it’ll fail—it’s when.
Kitec pipes don’t just leak. They burst. The brass fittings corrode from the inside out, the pipes weaken under normal water pressure, and when they go, they go hard. You’re looking at flooded rooms, damaged drywall, ruined floors, and thousands in emergency repairs—all while you’re scrambling to find someone who can respond fast in a mountain town where service calls aren’t always quick.
A Kitec repipe in Kings Beach, CA means you replace the system before it collapses. You avoid the chaos. You protect your investment. And if you’re planning to sell, you remove a red flag that kills deals and spooks insurers. This isn’t about upgrading for fun—it’s about getting ahead of a known problem before it costs you more than it should.
We’ve been serving homeowners across Placer County and the greater Lake Tahoe region for years. We’ve repiped homes in Kings Beach, Tahoe Vista, Carnelian Bay, and the surrounding North Shore communities—places where full-time residents and second homeowners alike need fast, reliable service without the runaround.
We’re not a call center. When you reach out, you’re talking to people who know the area, understand the housing stock, and have seen what happens when Kitec fails in a Lake Tahoe winter. We show up when we say we will, we price the job upfront, and we don’t leave until the work is done right and your home is clean.
You’ll find us rated 4.9 stars by over 541 customers who needed real solutions, not sales pitches. That’s what we do.
First, we come out and inspect your plumbing system. We confirm whether you have Kitec, where it’s installed, and what the scope of the replacement looks like. You get a clear, upfront price—no surprises later.
Once you’re ready to move forward, we schedule the work around your life. Most residential Kitec repiping jobs take a few days, and you can stay in your home the whole time. We shut off water only when necessary, and we work in sections so you’re not without plumbing for long stretches.
We remove the old Kitec piping—hot and cold lines, fittings, everything—and replace it with either copper or PEX, depending on your home and your preference. Both are reliable, code-compliant, and built to last. Once the new system is in and tested, we patch walls, match paint, and clean up. When we’re done, you won’t see evidence we were there—just a plumbing system you can trust.
Ready to get started?
A full Kitec repipe in Kings Beach, CA means we’re replacing all the problem piping in your home—not just patching a leak or swapping out a single line. That includes hot and cold water lines, the fittings that connect them, and any distribution points where Kitec was used.
In Kings Beach, many homes sit at elevation and deal with temperature swings that accelerate Kitec degradation. The brass fittings dezincify faster in certain water conditions, and the freeze-thaw cycles common to the North Shore don’t help. If your home has well water or you’ve noticed pressure drops, discolored water, or small leaks, you’re already seeing the early signs.
We also know that many Kings Beach homeowners are dealing with insurance companies that won’t cover homes with Kitec, or they’re trying to close a sale and the buyer’s lender flagged the plumbing. As a certified Kitec repipe contractor in Kings Beach, CA, we can document the replacement, provide proof of materials used, and give you the paperwork you need to satisfy insurers, buyers, or your own peace of mind. This isn’t just about fixing pipes—it’s about protecting your ability to insure, finance, and sell your home when the time comes.
Most residential Kitec repiping projects in Kings Beach run between $5,000 and $15,000, depending on the size of your home, how much Kitec was installed, and how accessible your plumbing is. A small one-bedroom cabin will cost less than a multi-story, multi-bathroom home.
The price includes removing all the old Kitec piping, installing new copper or PEX lines, pressure testing the system, and patching and painting any walls we had to open. We give you a fixed price upfront after we inspect the property, so there’s no guessing.
Yes, it’s an expense. But compare that to emergency water damage repairs, which can easily hit $10,000 to $30,000 once you factor in drywall, flooring, mold remediation, and contents loss. A proactive Kitec repipe in Kings Beach, CA is almost always cheaper than waiting for a failure.
Most homes take two to four days, start to finish. Smaller homes or condos might be done faster. Larger properties with multiple bathrooms, or homes where the plumbing runs through difficult-to-reach areas, might take a bit longer.
You can stay in your home during the work. We shut off water only when we’re actively working on a section, and we coordinate with you so you’re not left without water overnight or during times when you need it most.
Once the new system is installed and tested, we handle the finish work—patching drywall, matching paint, cleaning up debris. When we leave, your plumbing works, your walls look normal, and you’re done. No dragging it out for weeks.
Probably not. Most homeowners insurance policies won’t pay to replace Kitec piping unless it’s already failed and caused sudden, accidental damage—and even then, they’ll only cover the damage, not the cost of replacing the rest of the system.
In fact, many insurers in California won’t even write new policies on homes with Kitec still in place. If you’re buying or refinancing, your lender might require proof that the Kitec has been replaced before they’ll approve the loan.
There was a class action settlement back in 2012 against the manufacturer, but the deadline to file a claim has long since passed. At this point, the cost of replacing Kitec falls on you as the homeowner. The good news is that a professional Kitec repiping in Kings Beach, CA removes the liability, satisfies insurers, and eliminates a major obstacle if you ever decide to sell.
The most common early warning signs are drops in water pressure, especially if it happens suddenly or gets worse over time. That usually means the pipes or fittings are corroding internally and restricting flow.
You might also see discolored water—orange, brown, or cloudy—which indicates corrosion inside the lines. Small leaks around fittings, especially near the water heater or under sinks, are another red flag. If you see any of these, don’t wait. Kitec doesn’t get better with time.
The worst-case scenario is a full pipe burst, which typically happens without warning. The pipe doesn’t crack—it collapses. You’ll know immediately because water will be pouring into your home. If you’re in Kings Beach and you’re not sure whether you have Kitec, look for orange or blue plastic piping, often marked with “Kitec” or “KTC” on the pipe itself. If you see it, call someone who does Kitec repiping in Kings Beach, CA and get an inspection scheduled.
You can, but it won’t solve the problem. If one section of Kitec is failing, the rest of the system is degrading at the same rate. Patching one leak just buys you a little time before the next one shows up—and the next one after that.
We’ve seen homeowners spend thousands on multiple repairs over a year or two, only to realize they’ve paid more in emergency service calls than a full repipe would have cost in the first place. And each time a pipe bursts, you’re dealing with water damage, disruption, and stress.
A complete Kitec repipe in Kings Beach, CA removes the entire system and replaces it with materials that won’t fail. It’s a one-time job that actually solves the issue instead of kicking it down the road. If you’re already dealing with leaks, it’s time to replace it all.
Because we show up, we do the work right, and we don’t waste your time. We’ve repiped homes all over the North Shore, and we know what Kings Beach homeowners are dealing with—older housing stock, seasonal weather stress, and the need for service that doesn’t drag on for weeks.
We’re transparent about pricing from the start. We don’t upsell you on things you don’t need, and we don’t surprise you with extra charges after the fact. Our crews are licensed, experienced, and respectful of your home. We clean up after ourselves, and we don’t leave until the job is finished and you’re satisfied.
You’ll find us rated 4.9 stars by hundreds of customers who needed real help, not a sales pitch. If you’re in Kings Beach, CA and you need a certified Kitec repipe contractor you can trust, we’re here. Call us, and let’s get it handled.
Local Resources
Other Services we provide in Kings Beach
