Hear from Our Customers
Kitec has a 100% failure rate. Not most systems – all of them. The brass fittings corrode, the pipes degrade, and eventually they burst without warning.
You’re living in a home worth over $1.5 million in Newcastle with plumbing that insurance companies won’t cover anymore. Some carriers are giving 90-day deadlines to replace Kitec or they’ll drop your policy entirely.
The 2020 class action settlement is closed. There’s no compensation coming. You’re paying for this either way – the question is whether you do it before or after a catastrophic leak floods your home. A complete Kitec repipe in Newcastle, CA means you protect your property value, restore your insurance coverage, and sleep without wondering if tonight’s the night your pipes let go.
We’ve served Placer County and the surrounding areas since the late 1990s. We’ve seen Kitec installations age out and fail, and we’ve repiped hundreds of homes before the damage happened.
Newcastle homeowners need someone who shows up when they say they will, prices the job upfront, and doesn’t add surprise charges at the end. Our 4.7-star Google rating reflects that approach – we’re available 24/7, even at 2 AM on a Sunday, because plumbing emergencies don’t wait for business hours.
We know Newcastle’s water conditions, the age of local housing stock, and what it takes to protect a high-value property. You’re not getting a sales pitch – you’re getting a straight answer about what needs to happen and what it’ll cost.
First, we assess your current system – how many fixtures, what access points exist, and whether you want PEX or copper as your replacement. PEX lasts 75 years and installs faster. Copper can last 100 years and some homeowners prefer it for resale value.
We give you a firm price before any work starts. No estimates that balloon later. Most residential Kitec repipe jobs in Newcastle, CA take one to two days depending on your home’s size and layout.
We shut off your main water line, remove the old Kitec piping, and install the new system. Wall access is minimal with PEX because it’s flexible – we’re not tearing apart your entire house. Once the new pipes are in, we pressure test everything, restore water service, and walk you through what we did. You get documentation for your insurance company showing the Kitec is gone and your home is covered again.
Ready to get started?
A complete Kitec repipe in Newcastle, CA means every line of Kitec comes out – hot water, cold water, and all the brass fittings that fail first. We replace it with modern materials that won’t corrode or degrade under normal use.
You’ll notice better water pressure immediately. Kitec systems often develop buildup and restrictions as they age, choking flow to your fixtures. New piping restores full pressure and eliminates the metallic taste or discoloration some homeowners experience with failing Kitec.
Newcastle’s median home price sits around $1.6 million. A professional Kitec repiping protects that investment and removes a major red flag for future buyers. Homes with Kitec are harder to insure, harder to finance, and harder to sell – replacing it now means you’re not stuck explaining a ticking time bomb to a buyer’s inspector three years from now. You also get peace of mind knowing your family and belongings aren’t at risk from a sudden pipe failure while you’re at work or on vacation.
Most residential Kitec repipe projects in the Newcastle area range from $5,000 to $15,000 depending on your home’s size, the number of fixtures, and whether you choose PEX or copper replacement piping. Larger homes or properties with complex layouts can run higher.
We price every job upfront after assessing your specific situation. You’ll know the cost before we start, and we don’t add surprise charges when the work is done. Some customers have paid less than our initial estimate because the job went smoother than expected.
The cost of a repipe is significantly less than dealing with a catastrophic Kitec failure. Uninsured water damage from a burst pipe can easily hit $15,000 to $50,000 once you factor in drywall replacement, flooring, furniture, and mold remediation. You’re paying either way – this way you control the timing and avoid the emergency.
Most residential Kitec repiping jobs in Newcastle, CA take one to two days from start to finish. Smaller homes with straightforward layouts can sometimes be done in a single day. Larger properties or homes with limited access may take closer to three days.
We work efficiently without cutting corners. PEX piping installs faster than copper because it’s flexible and requires fewer fittings, which means less wall access and less disruption to your home. Copper takes a bit longer but some homeowners prefer it for longevity and resale considerations.
You’ll have water shut off during active work hours, but we coordinate with you to minimize inconvenience. If you need to stay in the home during the repipe, we can usually arrange temporary water access for essential use. Most customers find the process far less disruptive than they expected.
Insurance typically won’t pay to replace Kitec piping as a preventive measure. They view it as a maintenance issue, not a covered peril. However, many insurance companies are now requiring Kitec replacement as a condition of continued coverage.
Some carriers are sending letters giving homeowners 90 days to replace Kitec or face policy cancellation. Others are simply refusing to write new policies on homes with Kitec still installed. If your Kitec fails and causes water damage, insurance may cover the damage itself – but only if the failure was sudden and accidental, not a slow leak you ignored.
The 2020 class action settlement against Kitec manufacturers is closed. The deadline to file a claim has passed, so there’s no compensation available from that source. You’re covering the replacement cost out of pocket, but doing so protects your insurability and prevents a much larger financial hit if the system fails catastrophically.
Both PEX and copper are reliable long-term replacements for Kitec in Newcastle, CA. PEX typically costs less, installs faster, and lasts around 75 years under normal conditions. It’s flexible, which means we need less wall access during installation and fewer fittings overall.
Copper costs more and takes longer to install, but it can last 100 years and some homeowners prefer it for resale value or personal preference. Copper is also completely inert – it doesn’t interact with water chemistry at all, whereas PEX can occasionally impart a slight taste when first installed (this fades quickly).
For most Newcastle homeowners, PEX offers the best combination of cost, speed, and longevity. If you’re planning to stay in your home long-term and want the absolute longest lifespan, copper is worth considering. We’ll walk you through both options and help you decide based on your priorities and budget.
Reduced water pressure is often the first sign of Kitec degradation. As the brass fittings corrode and the pipes develop internal buildup, flow becomes restricted. You might notice weaker pressure at faucets or showers compared to a few years ago.
Discolored water – especially a yellowish or brownish tint – can indicate corrosion inside the pipes. Some homeowners also report a metallic taste in their drinking water as Kitec components break down. Visible corrosion on exposed fittings, particularly the brass connections, is a clear warning sign.
The problem with waiting for symptoms is that Kitec often fails suddenly without much warning. A pipe or fitting that looked fine yesterday can burst today, flooding your home with hundreds of gallons before you even know there’s a problem. If your home was built or remodeled between 1995 and 2007 and you see orange or blue piping, you have Kitec – and it’s worth replacing before you see any symptoms at all.
Replacing only the brass fittings is a temporary band-aid that doesn’t solve the underlying problem. The Kitec pipes themselves degrade over time, not just the fittings. The plastic piping becomes brittle, develops micro-cracks, and eventually fails even if you swap out every brass connection.
Some homeowners try this approach to save money, but it usually just delays the inevitable. You’ll spend money on a partial fix, then spend again later when the pipes themselves fail. Insurance companies and home inspectors know this – they want the entire Kitec system removed, not just patched.
A complete Kitec repipe in Newcastle, CA removes all the problematic materials and replaces them with modern piping that won’t fail. You get a permanent solution, restored insurance coverage, and documentation showing future buyers that the issue has been properly addressed. Partial fixes leave you vulnerable and don’t solve the insurability problem that’s becoming more urgent as carriers crack down on Kitec-equipped homes.
Local Resources
Other Services we provide in Newcastle
