Hear from Our Customers
You stop checking for leaks every time you hear water running. Your insurance company stops treating your home like a liability, and you can actually sell your house when you’re ready without scrambling to disclose plumbing problems that tank your sale price.
Kitec plumbing replacement in Elk Grove, CA means installing copper or PEX systems that last 50 to 100 years. Not 10 years before the fittings corrode and burst. You get normal water pressure again, no more mystery drips behind walls, and you sleep through the night without wondering if you’ll wake up to a flooded hallway.
Homes built between 1995 and 2007 in Elk Grove got stuck with Kitec during the construction boom. Now those systems are hitting their failure window. Replacing Kitec pipes before they fail costs less than replacing them after they’ve destroyed your floors, drywall, and belongings. That’s the reality, and that’s why homeowners call us before the emergency happens.
We’ve served El Dorado County and the greater Sacramento region for over 24 years. We know which Elk Grove neighborhoods got hit hardest with Kitec installations, and we’ve repiped enough homes to spot problems before you even finish describing them.
We’re licensed, insured, and available 24/7 because Kitec failures don’t wait for business hours. Our pricing is transparent before we start work, and some customers end up paying less than the estimate. That’s not a marketing line – it’s what happens when you price honestly and work efficiently.
Elk Grove homeowners need someone who shows up on time, finishes the job without dragging it out, and doesn’t leave you guessing about costs. That’s what we do.
First, we inspect your entire system to map out where Kitec runs through your home. Most Elk Grove houses have it in walls, ceilings, and under slabs. We identify access points and plan the replacement route to minimize wall cuts and disruption.
Next, we remove all Kitec piping and fittings. Not just the visible sections – everything. Leaving even one Kitec fitting in your system defeats the purpose because those brass fittings are what fail first. We replace it with copper or PEX depending on your home’s layout and your preference.
The actual work typically takes two to five days depending on your home’s size and how accessible the pipes are. You can stay in your home during the work. We shut off water only when necessary, and we coordinate with you so you’re not caught off guard. After installation, we pressure test everything, restore your walls, and walk you through what we did. You get documentation that satisfies insurance companies and future home buyers.
Ready to get started?
Complete removal of all Kitec piping and brass fittings throughout your home. Installation of copper or PEX systems that meet current California building codes. Pressure testing to confirm no leaks before we close up walls. Wall repair and paint matching where we accessed pipes.
Elk Grove homes in neighborhoods like Laguna Ridge, Stonelake, and East Franklin typically have Kitec in both hot and cold water lines. We replace both. Partial replacement doesn’t solve the problem because the fittings fail regardless of which line they’re on.
You also get documentation showing the work was completed by a licensed contractor. That matters when you file insurance claims, sell your home, or refinance. Some mortgage lenders won’t approve loans on homes with Kitec plumbing, and buyers in Elk Grove are getting smarter about asking for disclosure during inspections.
The Sacramento region saw heavy Kitec installation during the early 2000s housing boom. If your Elk Grove home was built or remodeled between 1995 and 2007, there’s a real chance you have it. Most homeowners don’t know until they see the orange and blue pipes during a repair, or until a home inspector flags it during a sale.
Most Elk Grove homes cost between $5,000 and $15,000 for complete Kitec plumbing replacement. Larger homes or properties with difficult pipe access can run higher, sometimes up to $30,000. The range depends on square footage, how many bathrooms you have, and whether pipes run through slabs or are accessible through walls and attics.
We give you upfront pricing after inspecting your home. No surprises, no padding the estimate. Some jobs come in under the original quote if the work goes faster than expected.
Waiting until Kitec fails costs more. Water damage from burst pipes can easily hit $20,000 to $50,000 once you factor in flooring, drywall, mold remediation, and replacing damaged belongings. Insurance typically won’t cover that because they classify Kitec failure as a known defect, not a sudden accident.
Most insurance companies won’t pay to replace Kitec before it fails, but some will help cover costs because it reduces their future claim risk. It’s worth asking your insurer directly. What insurance definitely won’t cover is damage caused by Kitec failure, because that’s considered damage from faulty materials, which is excluded in most policies.
Some Elk Grove homeowners have seen their premiums increase or their coverage limited specifically because of Kitec plumbing. A few insurance companies have dropped coverage entirely on homes with Kitec. Replacing it eliminates that problem and often restores normal coverage terms.
After replacement, you’ll have documentation proving the Kitec is gone. That’s what you show your insurance company to get your policy back to normal. It’s also what you show buyers when you sell, so they don’t walk away or demand a massive price reduction.
Most Elk Grove homes take two to five days for complete Kitec replacement. Single-story homes with accessible attics usually fall on the shorter end. Two-story homes or properties where pipes run through concrete slabs take longer because access is more complicated.
You can stay in your home during the work. We shut off water only when we’re actively connecting new pipes, and we coordinate those times with you. Most families continue their normal routines with minor adjustments.
The timeline also depends on how much wall repair is needed. If we have to cut into multiple walls to access pipes, we factor in drywall repair and paint time. We don’t leave your home torn apart – we finish what we start, and we clean up daily so you’re not living in a construction zone longer than necessary.
Dropping water pressure is usually the first sign. Kitec fittings corrode from the inside out, narrowing the pipe opening and reducing flow. You might notice it takes longer to fill a glass of water or your shower pressure isn’t what it used to be.
Visible corrosion on brass fittings is another warning sign. If you see white or green buildup on the fittings where Kitec pipes connect, that’s dezincification – the chemical process that weakens the brass and leads to failure. Small leaks around fittings or damp spots on walls and ceilings also indicate the system is deteriorating.
Some Kitec systems fail suddenly with no warning. Pipes burst, fittings crack, and water floods your home in minutes. That’s why waiting for symptoms is risky. If your Elk Grove home was built between 1995 and 2007, the safer move is getting the system inspected and replaced before you’re dealing with an emergency.
You can, but it doesn’t solve the problem. Kitec failures happen because of the brass fittings, not just the pipes. Leaving any Kitec fittings in your system means you’re still at risk for the same catastrophic failure you’re trying to avoid.
Partial replacement also complicates things if you’re trying to sell your home or satisfy insurance requirements. Buyers and insurers want confirmation that all Kitec is gone, not just the section that was leaking. Partial fixes create documentation headaches and don’t give you the peace of mind you’re paying for.
The cost difference between partial and full replacement isn’t as big as you’d think. Once we’re already in your walls and have the water shut off, completing the whole system makes more sense than doing it in stages. You avoid multiple service calls, multiple disruptions, and the risk that another section fails six months later.
California law requires you to disclose known defects, and Kitec qualifies. If you know it’s there and don’t disclose it, you’re opening yourself up to legal liability after the sale. Buyers who discover undisclosed Kitec can sue for damages, and they often win.
Even if you disclose it, Kitec tanks your sale price or kills deals entirely. Buyers either walk away, demand you replace it before closing, or negotiate steep price reductions to cover replacement costs themselves. Some mortgage lenders won’t approve loans on homes with Kitec, which shrinks your buyer pool to cash offers only.
Replacing Kitec before listing your Elk Grove home costs less than the hit you’ll take on sale price. You also avoid deals falling apart during escrow when the buyer’s inspector flags it. Clean plumbing makes your home easier to sell, easier to insure, and worth more to buyers who don’t want to inherit someone else’s plumbing emergency.
Local Resources
Other Services we provide in Elk Grove
