Hear from Our Customers
If your Fairoaks home was built between 1995 and 2007, there’s a real chance you have Kitec plumbing. And if you do, you’re living with pipes that will fail. Not might fail—will fail.
Kitec doesn’t leak slowly or give you warning signs. It bursts. You get flooding, water damage, ruined floors, destroyed drywall, and an insurance claim that may not even be covered. That’s the reality we’ve been warning homeowners about for years.
Replacing Kitec plumbing in Fairoaks isn’t about overreacting. It’s about removing a known defect before it costs you thousands in emergency repairs. Once it’s gone, you sleep better. Your insurance company stops flagging your policy. Your home value stabilizes. And you’re not wondering every time you leave the house if today’s the day a pipe lets go.
Murray Plumbing has been serving Fairoaks and the greater Sacramento area since the late ’90s. We’ve seen Kitec go in, watched it start failing, and we’ve been pulling it out of homes ever since.
We’re a family-owned company. Licensed, insured, and we don’t play games with pricing. Most of our customers tell us the final bill came in lower than the estimate—and that’s not an accident. We price jobs honestly from the start.
When you call us for Kitec pipe replacement in Fairoaks, CA, you’re working with a local crew that knows the housing stock here. We know which neighborhoods have it, which builders used it, and how it was typically installed. That experience makes the job faster, cleaner, and less disruptive for you.
First, we come out and assess your plumbing. We’ll confirm whether you actually have Kitec, where it runs, and what’s involved in replacing it. You get a transparent estimate before any work starts.
Once you’re ready to move forward, we schedule the replacement. Depending on your home’s layout and how much Kitec is present, the job typically takes a few days. We remove all the old Kitec piping—hot and cold water lines—and replace it with durable materials like copper or PEX that won’t degrade over time.
We handle the drywall access, the installation, the testing, and the cleanup. You’re not coordinating with three different contractors. And when we’re done, your plumbing is code-compliant, your water pressure is restored, and you’ve eliminated the single biggest liability in your home’s infrastructure.
Ready to get started?
You get complete removal of every Kitec pipe in your home. We don’t patch sections or leave any of the old system in place. If it’s Kitec, it comes out.
We install replacement piping that meets current California plumbing codes and carries real manufacturer warranties. Copper lasts up to 100 years. PEX is flexible, corrosion-resistant, and backed by 50-year warranties. Both options are light-years ahead of what Kitec ever was.
Fairoaks homes from the late ’90s and early 2000s often have Kitec running through walls, attics, and crawl spaces. We’ve worked in all of them. We know how to access the lines with minimal damage, and we restore walls and ceilings so you’re not left with a construction zone. You also get documentation of the work—critical if you’re selling your home or filing for updated insurance coverage.
This isn’t just about fixing a plumbing problem. It’s about removing a ticking clock that’s affecting your home’s value, your insurability, and your peace of mind.
Kitec was installed in homes built or renovated between 1995 and 2007, so if your Fairoaks property falls in that window, it’s worth checking. The pipes are usually orange or blue, and the fittings are stamped with “Kitec” or the brand names IPEX AQUA, PlumbBetter, KERR Controls, or XPA.
You’ll typically find it near your water heater, under sinks, or in your attic or crawlspace. If you’re not sure, we can come out and identify it for you during an inspection. It only takes a few minutes, and it’s better to know now than find out during a flood or a home sale.
Most Kitec replacement projects in the Sacramento area run between $5,000 and $30,000, depending on the size of your home and how much piping needs to be replaced. Single-story homes with accessible plumbing are usually on the lower end. Larger homes or properties with complex layouts cost more.
We give you a detailed estimate before starting any work, and we don’t inflate numbers to leave room for negotiation. What we quote is what we expect the job to cost. A lot of our customers are surprised when the final bill comes in under the estimate—that’s just how we operate.
If you’re weighing the cost against the risk, consider this: one Kitec failure can easily cause $10,000 to $50,000 in water damage. Replacing it now is cheaper than dealing with the aftermath.
Probably not. Most homeowners insurance policies won’t pay to replace Kitec as a preventive measure. They see it as a maintenance issue, not a covered loss. However, once Kitec fails and causes water damage, your claim might be denied entirely—or you’ll face a higher deductible because the insurance company flagged Kitec as a known risk.
Some insurers in California are refusing to cover homes with Kitec at all, or they’re charging significantly higher premiums. Once you replace the system, those restrictions typically disappear. You’ll want to notify your insurance company after the work is done so they can update your policy.
The bottom line: you’re paying for the replacement out of pocket, but you’re also protecting yourself from a much bigger financial hit down the road.
Most residential Kitec replacements take between two and five days, depending on the size of your home and how much piping is involved. We’re not tearing apart your entire house—we access the lines strategically, remove the old pipes, install the new system, test everything, and patch things back up.
You’ll have limited water access during parts of the job, but we work efficiently to minimize disruption. We’ll walk you through the timeline during your estimate so you know what to expect. If you need to coordinate time off work or arrange temporary accommodations, we’ll give you enough notice.
The goal is to get your plumbing safe and functional as quickly as possible without cutting corners. Kitec replacement in Fairoaks, CA isn’t something you want rushed—but it also shouldn’t drag on for weeks.
You’re gambling with when, not if, they fail. Kitec has a defect that causes the fittings to corrode and the pipes to weaken over time. The class action lawsuit against the manufacturer confirmed this. Every plumbing expert agrees: Kitec will fail.
When it does, you’re looking at sudden flooding. Burst pipes don’t drip—they dump gallons of water into your home in minutes. Floors, walls, furniture, electronics—all of it gets damaged. Then you’re paying for emergency plumbing, water extraction, mold remediation, and reconstruction. And if your insurance company already flagged Kitec on your policy, your claim might get denied or hit with a massive deductible.
Beyond the damage, you’ll also struggle to sell your home. Buyers see Kitec and either walk away or demand a price reduction that covers replacement costs. Mortgage companies are wary of it too. Waiting doesn’t make the problem smaller—it just makes the consequences more expensive.
Because we’ve been doing this work in Fairoaks and the surrounding Sacramento area for over two decades. We know the local housing stock, we understand how Kitec was installed here, and we’ve built a reputation on showing up when we say we will and charging what we said we’d charge.
Our Google rating is 4.7 out of 5 based on 93 reviews, and a common theme is that customers were relieved by how straightforward we made the process. No surprise fees. No upselling. No disappearing for days in the middle of a job. We’re licensed, insured, and available 24/7 if something goes wrong before you’re able to schedule a full replacement.
You’re trusting someone to tear into your walls and replace a critical system in your home. You want a contractor who’s done it hundreds of times, who prices fairly, and who treats your property with respect. That’s what we do.
Local Resources
Other Services we provide in Fairoaks
