Hear from Our Customers
Your Kitec system is past its lifespan. Every system installed between 1995 and 2007 is now overdue for failure, and when it happens, you’re looking at thousands in water damage on top of replacement costs.
Replacing Kitec plumbing now means you control the timeline. You schedule the work when it’s convenient. You avoid the panic of burst pipes flooding your floors at 2 AM. You restore full insurance coverage without the higher deductibles or restrictions that come with keeping Kitec in your walls.
This isn’t about selling you something you don’t need. The pipes will fail. The only question is whether you replace them on your terms or theirs. Most Meadow Vista homeowners who call us wish they’d done it sooner, before dealing with emergency water extraction, drywall replacement, and mold remediation.
We’ve served residential and commercial clients across Sacramento and El Dorado Counties since the late ’90s. We’re a family-owned operation, which means lower overhead and pricing that reflects actual work, not corporate markups.
Meadow Vista homeowners deal with unique challenges. Your properties sit in a rural area where response times matter and where many homes were built during the exact window when Kitec was being installed. We know the area, we know the housing stock, and we know what replacing Kitec pipes in these homes actually involves.
You’ll get a detailed estimate upfront. No hidden fees. No surprise charges when the job’s done. Most of our work comes from referrals, which tells you what you need to know about how we operate.
First, we schedule a walkthrough of your property. We need to see where your Kitec lines run, what access points exist, and what kind of finish work will be required after the pipes are out. You’ll get a written estimate that breaks down labor, materials, and any drywall or paint work needed to close things up.
Once you approve the estimate, we schedule the replacement. Most jobs take a few days depending on the size of your home and how your plumbing is routed. We replace the old Kitec with either PEX or copper, both of which are rated to last decades longer than what you’re pulling out.
After the new pipes are in and tested, we handle the finish work. That means patching drywall, repainting, and making sure your walls look like we were never there. You’re not hiring three different contractors to get this done. It’s all included.
Ready to get started?
A complete Kitec replacement in Meadow Vista, CA means removing every inch of the old pipe and installing a system designed to last. You’re not patching one section and hoping the rest holds. You’re eliminating the risk entirely.
We use PEX or copper depending on your home’s layout and your preference. PEX is flexible, cost-effective, and easier to route through tight spaces. Copper costs more but lasts up to 100 years with proper installation. Both options are light-years ahead of Kitec in terms of durability and safety.
The work includes pressure testing the new system before we close up your walls. You’ll also get documentation for your insurance company showing the Kitec has been removed and replaced with code-compliant materials. That’s critical for restoring full coverage and avoiding the premium hikes or coverage restrictions that come with keeping Kitec in place.
Meadow Vista’s median home value sits above $600,000. Protecting that investment means dealing with known risks before they become expensive emergencies. Most homeowners here are established, many are retired, and the last thing you need is a plumbing disaster disrupting your routine or draining your savings on damage that could’ve been prevented.
Replacement costs typically range from $5,000 to $15,000 for most single-family homes, depending on square footage, pipe accessibility, and how much finish work is needed after the old pipes come out. Larger homes or properties with complex layouts can run higher.
The estimate includes removing all Kitec piping, installing new PEX or copper lines, pressure testing the system, and completing drywall and paint work to restore your walls. You’re not paying separately for a plumber, a drywaller, and a painter. It’s one price for the complete job.
We provide written estimates before any work starts. No surprises, no upselling once we’re halfway through. Some companies come in cheaper on the estimate and then hit you with change orders. We don’t operate that way. What we quote is what you pay, and in many cases, the final bill comes in under the original estimate.
Most residential Kitec replacements take between two and five days depending on the size of your home and how your plumbing is routed. A smaller home with straightforward access can be done faster. A larger property with pipes running through multiple floors or hard-to-reach areas takes longer.
You’ll have limited water access during parts of the job, but we work efficiently to minimize disruption. We’re not tearing apart your entire house for a week. We open what we need to open, replace the pipes, test the system, and close it back up.
The timeline also depends on whether we’re just handling the plumbing or if there’s extensive finish work involved. If your Kitec runs through finished spaces with drywall and paint, that adds time. We handle all of it, but it’s part of the schedule. You’ll know the expected timeline before we start.
Most insurance policies won’t cover the cost of replacing Kitec as a preventive measure. They treat it as a maintenance issue, not a covered loss. However, if your Kitec pipes burst and cause water damage, your policy may cover the damage itself, though many insurers now exclude Kitec-related claims or impose higher deductibles.
The bigger issue is what happens to your coverage if you don’t replace the Kitec. Many insurance companies in California are refusing to renew policies for homes with Kitec still installed, or they’re adding exclusions that leave you on the hook for any water damage caused by pipe failure. Some are raising premiums significantly for homes with known Kitec systems.
Replacing the pipes eliminates that problem. You’ll get documentation showing the Kitec has been removed and replaced with code-compliant materials, which you can provide to your insurer. That restores full coverage and removes the risk of non-renewal or restricted policies. The class action lawsuit deadline has passed, so there’s no settlement money available. You’re paying for this out of pocket, but it’s cheaper than dealing with burst pipes and fighting with your insurance company after the fact.
Kitec pipes don’t leak slowly. They burst. The dezincification process causes zinc oxide to build up inside the fittings, which increases pressure until the pipe gives out suddenly. You’ll go from no problem to gallons of water flooding your floors in seconds.
The immediate damage depends on where the pipe bursts and how quickly you can shut off the water. A burst in your attic or inside a wall can dump water into your ceilings, insulation, and drywall before you even realize what’s happening. You’re looking at emergency water extraction, drywall replacement, potential mold remediation, and all the costs that come with that, on top of still needing to replace the Kitec.
Most homeowners who’ve dealt with a Kitec failure say the same thing: they wish they’d replaced the system before it failed. The cost of proactive replacement is a fraction of what you’ll spend cleaning up after a burst pipe, and you avoid the stress of dealing with an emergency in the middle of your daily life. Meadow Vista’s rural location also means response times for emergency services can be longer, which gives water more time to spread and cause damage.
You can, but it doesn’t solve the problem. Kitec fails because of a chemical process that affects the entire system over time. Replacing one section leaves the rest of the pipes vulnerable to the same failure, which means you’re likely to end up replacing it all eventually anyway.
Partial replacement makes sense only in very specific situations, like if you’ve already had a burst and need an emergency repair to restore water service while you plan for a full replacement. But as a long-term strategy, it’s throwing money at a temporary fix.
The other issue is that insurance companies don’t care if you’ve replaced part of your Kitec. They want documentation showing the entire system has been removed. Partial replacement doesn’t change your coverage situation, and it doesn’t eliminate the risk of future failures. We’ll recommend a complete replacement if you’re going to do the work at all. It costs more upfront, but it’s the only way to actually solve the problem and move forward without worrying about when the next pipe is going to burst.
We respond fast, we price fairly, and we’ve been doing this for over two decades. You’re not dealing with a national franchise that subcontracts the work or a fly-by-night operation that disappears after the check clears. We’re a family-owned business with a reputation built on referrals and repeat customers.
When you call, you’ll talk to someone who knows what Kitec replacement actually involves and can give you a realistic timeline and estimate. We don’t upsell. We don’t add surprise charges halfway through the job. We show up when we say we will, we do the work, and we clean up after ourselves.
Meadow Vista homeowners have enough to worry about without wondering if their plumber is going to show up or if the final bill is going to match the estimate. We handle the entire job from start to finish, including the finish work that most plumbers don’t want to touch. You get one point of contact, one timeline, and one invoice. That’s how it should work.
Local Resources
Other Services we provide in Meadow Vista
