Hear from Our Customers
You stop checking for water stains every time you walk past a wall. Your insurance company stops sending those letters about coverage limitations or higher deductibles. If you’re planning to sell, buyers and their inspectors move past the plumbing section without red flags.
Kitec systems don’t gradually decline—they fail. The fittings corrode from the inside, the pipes become brittle, and when they go, they burst. That’s not a slow leak you can catch with a bucket. That’s flooding, ruined floors, damaged drywall, and an insurance claim that might not get covered if they’ve already warned you about the Kitec.
Replacing kitec plumbing in Somerset, CA means upgrading to modern PEX or copper systems that won’t corrode, won’t burst without warning, and won’t threaten your coverage. You’re not just fixing a problem—you’re removing it entirely. The work takes a couple of days. The relief lasts decades.
We’ve been handling residential plumbing in Somerset, CA for over two decades. We’re not a franchise or a call center routing your job to whoever’s available. We’re a local company that knows Somerset’s foothills, the water conditions here, and the homes built during the years when Kitec was still being installed.
Our Google rating sits at 4.7 out of 5 based on 93 reviews because we show up when we say we will, we quote the job upfront, and we don’t add surprise charges at the end. Most of our kitec pipe replacement jobs in Somerset, CA come in under the original estimate—not over.
If your insurance company has flagged your Kitec system, or if you’re just tired of wondering when it’s going to fail, we’ll walk you through what replacement actually looks like. No pressure, no upselling—just a clear assessment and a fair price.
First, we come out and assess your system. That means identifying where the Kitec runs, what’s behind your walls, and how accessible everything is. We’re looking at your water heater connections, your supply lines, and any areas where the fittings are most likely to fail first.
Then we give you an upfront price. That includes removing the old Kitec system, installing new PEX or copper piping, reconnecting your fixtures, and patching any access points we had to open. No diagnostic fees, no hourly rate that climbs as the day goes on.
The actual replacement takes one to two days for most homes in Somerset, CA. You can stay in the house while we work. We’re not tearing out entire walls—we’re making strategic access points, running new lines, and closing everything back up. When we’re done, you’ll have a fully functional plumbing system that meets current code, satisfies your insurance carrier, and won’t keep you up at night wondering if today’s the day it bursts.
Ready to get started?
When we replace Kitec pipes in Somerset, CA, we’re removing every section of the old system—not just the parts that are easiest to reach. That includes all the brass fittings that corrode from the inside, the orange and blue pipes that become brittle over time, and any connections to your water heater or fixtures.
We install new supply lines using either PEX or copper, depending on what makes sense for your home and your budget. PEX is flexible, durable, and handles Somerset’s water conditions without issue. Copper is the traditional standard and works just as well. Both options will outlast Kitec by decades.
Somerset’s foothills location means some homes have unique layouts, crawl space access, or older construction that requires more careful planning. We’ve handled enough kitec plumbing replacement projects in this area to know what to expect. We keep the work contained, protect your floors and belongings, and clean up completely when we’re done.
You also get documentation of the work—something your insurance company will want to see, and something that adds value if you ever sell. Buyers in Somerset, CA know to check for Kitec during inspections. Having proof of a full replacement removes that obstacle entirely.
Most full Kitec replacement projects in Somerset, CA run between $5,000 and $15,000, depending on the size of your home, how much of the system needs replacing, and how accessible your plumbing is. A smaller home with easy crawl space access will cost less than a two-story house where we need to open walls in multiple rooms.
We give you a fixed price upfront after we assess your specific situation. That price includes removing all the old Kitec, installing new piping, reconnecting everything, and patching any access points. No hourly rates, no surprise add-ons.
The cost might feel steep until you compare it to what happens if the system fails. A burst pipe can cause $10,000 to $50,000 in water damage, and if your insurance company has already warned you about the Kitec, they may not cover it. Replacement is expensive. Waiting is riskier.
No, and here’s why: the fittings that connect Kitec pipes are no longer manufactured. The sizing doesn’t match standard plumbing fittings, so you can’t just swap in a new connection when one fails. Even if you could patch a leak, you’d just be buying time until the next section corrodes and bursts.
Kitec doesn’t fail in one spot and then stabilize. The entire system is deteriorating at roughly the same rate because the defect is universal—it’s in the material itself, not just one bad batch. Replacing one section leaves the rest of the system just as vulnerable.
Insurance companies and mortgage lenders know this, which is why they treat Kitec as a full replacement issue, not a repair issue. If you’re trying to sell your home or maintain coverage, partial fixes won’t satisfy them. Full replacement is the only option that actually solves the problem.
Most Kitec replacement projects in Somerset, CA take one to two days, depending on the size of your home and how your plumbing is laid out. Single-story homes with accessible crawl spaces tend to go faster. Two-story homes where we need to open walls or work around finished spaces take a bit longer.
You can stay in your home during the work. We’re not gutting rooms or making the house unlivable—we’re making targeted access points, running new lines, and reconnecting your fixtures. Your water will be off during parts of the process, but we’ll coordinate with you so it’s not off overnight.
We also clean up completely when we’re done. That means patching drywall, hauling away the old piping, and leaving your home in the same condition we found it—just with a plumbing system that actually works. Most of our customers are surprised by how smooth the process is once it’s underway.
Yes. Kitec is one of those inspection red flags that can kill a sale or force you to drop your price. Buyers know it’s a problem, their inspectors will call it out, and their mortgage company may refuse to approve the loan until it’s replaced. Even if the buyer is willing to move forward, they’ll likely ask you to cover the replacement cost—or they’ll walk.
Replacing the system before you list removes that obstacle entirely. You can market the home with confidence, and buyers won’t have a reason to lowball you over the plumbing. It also signals that you’ve maintained the property, which makes everything else look better by comparison.
If you’re not selling right now, replacement still protects your home’s value. Somerset, CA has a competitive real estate market, and homes with outdated or risky plumbing sit longer and sell for less. Kitec replacement is an investment in marketability, not just function.
If your Kitec pipes burst, you’re looking at immediate water damage—flooring, drywall, insulation, and anything stored near the leak. Depending on where the burst happens, you could have water running for hours before you even notice. That’s not a small cleanup. That’s a full restoration project with fans, dehumidifiers, and contractors ripping out damaged materials.
Your insurance may cover some of it, but if they’ve already sent you a letter about the Kitec and you didn’t act, they can deny the claim or apply a higher deductible. Some policies specifically exclude coverage for known defects that weren’t addressed. Even if they do cover it, you’re still dealing with the disruption, the deductible, and the hassle of living in a construction zone while repairs happen.
The failure rate for Kitec isn’t a matter of if—it’s when. Waiting doesn’t improve the odds. It just increases the chance that you’ll be dealing with an emergency replacement instead of a planned one, and emergency work always costs more.
Yes. If your Kitec system has already failed or if you’re seeing signs of an imminent burst—like bulging pipes, visible corrosion, or sudden drops in water pressure—we offer 24/7 emergency response in Somerset, CA. We understand that plumbing failures don’t wait for business hours.
Emergency replacements work the same way as planned ones, but we prioritize getting your water shut off, assessing the damage, and starting the replacement as quickly as possible. Response time depends on your location in Somerset and our current call volume, but we typically arrive within hours of your call.
That said, planned replacement is always better than emergency replacement. You have more control over timing, less stress, and no water damage to deal with. If you know you have Kitec and you’re just waiting for the right time, now is the right time. The system isn’t going to improve with age.
Local Resources
Other Services we provide in Somerset
