Hear from Our Customers
Your shower runs at the perfect pressure without hammering pipes. Your washing machine stops making that grinding noise. Your water heater lasts years longer instead of failing prematurely from pressure stress.
No more surprise leaks under sinks or behind toilets. No more faucets that spray water everywhere when you turn them on. Your monthly water bill drops because you’re not paying for water that’s literally being forced out of your system.
The constant worry about what might break next disappears. You know your plumbing system is protected, your appliances are safe, and your home won’t flood while you’re at work.
We understand River’s unique water pressure challenges. California’s hilly terrain creates pressure variations that can exceed 400 PSI in some areas – far beyond what your home’s plumbing can handle safely.
We’re not the biggest plumbing company in Northern California, and that’s exactly why you want us. As a family-owned business with low overhead, we keep our prices fair while delivering the expertise that comes from over two decades of hands-on experience.
Our team has seen every type of pressure regulator failure in River homes. We know which brands hold up in this area’s conditions and which ones will leave you dealing with the same problem in three years.
First, we test your current water pressure using professional gauges to get accurate readings. We check multiple points in your home to understand exactly what’s happening with your system.
If you need a new regulator, we locate the optimal installation point – usually where your service line enters the house, after the main shutoff valve. This positioning lets us work on the regulator without affecting your entire water supply.
We install the new pressure reducing valve and calibrate it to maintain steady pressure between 50-70 PSI. Then we test every fixture in your home to ensure consistent, safe pressure throughout your plumbing system. You’ll know immediately if the installation solved your pressure problems.
Ready to get started?
Every installation includes pressure testing before and after the work to document the improvement. We use high-quality regulators designed to handle River’s specific water conditions and pressure variations.
River homes built before current plumbing codes often lack proper pressure regulation. California requires pressure regulators when main line pressure exceeds 80 PSI, but many older properties were grandfathered in. We bring these homes up to current safety standards.
Our service includes a full system inspection using sewer cameras when needed. This technology eliminates guesswork and shows us exactly what’s happening inside your pipes. You get a complete picture of your plumbing health, not just a band-aid fix.
Signs include water pressure above 80 PSI, hammering or banging sounds in your pipes, and appliances making unusual noises. You might notice faucets spraying water forcefully or toilets running constantly.
Test your pressure by attaching a gauge to an outdoor spigot with all other water sources turned off. If readings exceed 80 PSI or fluctuate dramatically, your regulator likely needs attention. Most regulators last 10-15 years, so age is also a factor.
Don’t wait for a catastrophic failure. High pressure damages expensive appliances like water heaters, washing machines, and dishwashers. The cost of regulator replacement is minimal compared to replacing these items.
California plumbing code requires pressure between 15-80 PSI, but the ideal range is 50-70 PSI for most homes. This provides adequate flow for all fixtures while protecting your plumbing system from damage.
River’s terrain creates natural pressure variations. Homes at lower elevations often experience higher pressure from the weight of water flowing downhill. Without proper regulation, this pressure can exceed 100 PSI or more.
Pressure below 30 PSI feels inadequate for showers and appliances. Pressure above 80 PSI stresses pipes, causes leaks, and reduces the lifespan of water-using appliances. The sweet spot protects your investment while ensuring comfort.
Absolutely. High pressure forces water through your system faster than designed, creating stress on pipe joints, fixture connections, and appliance components. This leads to premature wear and unexpected failures.
Water heaters are particularly vulnerable. Excessive pressure can damage the tank, relief valves, and internal components. Washing machines and dishwashers experience seal failures, motor problems, and shortened lifespans under high pressure conditions.
Even your home’s pipes suffer. High pressure accelerates corrosion in metal pipes and can cause joints to fail. The repair costs add up quickly, making pressure regulation a smart investment in your home’s infrastructure.
Installation costs vary based on your home’s specific setup and the type of regulator needed. Simple installations where we’re replacing an existing unit typically cost less than new installations requiring additional plumbing work.
We provide free estimates so you know exactly what to expect before any work begins. Our pricing includes the regulator, installation, pressure testing, and calibration. No surprise fees or hidden charges.
Consider the cost of not having proper pressure regulation. A single water heater replacement due to pressure damage often exceeds the cost of regulator installation. Factor in potential pipe repairs, fixture damage, and water waste, and regulation pays for itself.
Properly installed and calibrated regulators maintain excellent flow while protecting your system. We set pressure between 50-70 PSI, which provides strong shower pressure and quick-filling appliances without the damaging effects of excessive pressure.
Many homeowners actually notice improved performance after installation. Without pressure fluctuations, fixtures work more consistently. Showers maintain steady temperature and pressure instead of varying throughout your use.
If you currently have very high pressure, there might be an adjustment period. However, most people quickly adapt and appreciate the consistent, controlled water flow throughout their home.
Test your water pressure annually using a simple gauge available at hardware stores. This helps you catch problems before they become expensive emergencies. Professional inspection every 3-5 years ensures optimal performance.
Most regulators require minimal maintenance but benefit from occasional cleaning if your water has high mineral content. River’s water conditions can cause sediment buildup that affects regulator performance over time.
Watch for warning signs like pressure changes, pipe noises, or appliance problems. These indicate your regulator may need adjustment or replacement. Don’t ignore these symptoms – early intervention prevents costly damage to your plumbing system.
Local Resources
