Hear from Our Customers
If your home was built between 1995 and 2007, there’s a real chance you have Kitec plumbing. And if you do, you’re living with a system that plumbing experts agree will fail—it’s just a matter of when.
Kitec pipes don’t give you much warning. The brass fittings corrode from the inside out through a process called dezincification, where zinc breaks down when exposed to oxygen and moisture. That creates blockages, pressure buildup, and eventually a burst pipe that floods your home in minutes.
The bigger problem? Your insurance company knows about Kitec. Some won’t cover homes with it at all. Others will, but they’re watching closely, and when that pipe bursts, you’re looking at thousands in water damage on top of the repair bill. Complete Kitec leak repair or replacement eliminates that risk entirely and keeps your coverage intact.
You’re not overreacting by looking into this. You’re doing what any smart homeowner in Meadow Vista, CA would do when they realize the clock is ticking.
We’ve served families and businesses throughout El Dorado County for over 24 years. We’re licensed, insured, and locally owned—which means lower overhead and fair pricing on every job.
Meadow Vista sits in an area with hard water from the Meadow Vista County Water District. That mineral-heavy water accelerates corrosion in Kitec systems faster than in other regions. We’ve seen it happen, and we know how to handle it—whether it’s an emergency Kitec water heater plumbing repair or a full-home repipe.
Our 4.7-star Google rating comes from showing up on time, doing the work right, and charging exactly what we quoted. No surprises. No upsells. Just honest plumbing work from people who live and work in the same community you do.
First, we come out and inspect your plumbing system to confirm whether you have Kitec and where it’s located. Most of the time, you’ll see orange or blue pipes with brass fittings stamped with “Kitec” or the manufacturer names like IPEX or PlumbBetter.
Once we know what we’re dealing with, we give you a free estimate that covers the full scope of work. If it’s a small Kitec leak repair, we can often handle it same-day. If you need a complete repipe, we walk you through the timeline, the materials we’ll use (usually PEX or copper), and what to expect during the job.
The actual replacement involves removing the old Kitec lines and fittings, installing new piping throughout your home, and pressure-testing everything to make sure it’s solid. We work clean, we work fast, and we don’t leave until the job’s done right. Most repipes take a few days depending on the size of your home and how accessible the plumbing is.
After we’re done, you’ll have a system that’s code-compliant, insurance-friendly, and built to last decades—not years.
Ready to get started?
When we handle Kitec plumbing problems in Meadow Vista, CA, you’re getting a full-system evaluation, not just a patch job. We check your water heater connections, your supply lines, your fixtures—anywhere Kitec might be hiding.
Our repipes generally run between $4,500 for smaller homes with one or two bathrooms and easier access, up to $15,000 for larger properties with multiple bathrooms and longer pipe runs. That’s the reality of the work, and we tell you upfront so there’s no sticker shock later.
Meadow Vista’s hard water makes Kitec even more vulnerable. The mineral content here wears down pipes faster and contributes to the corrosion that leads to failure. That’s why we recommend materials like PEX, which handles hard water better and won’t corrode the way Kitec does.
You also get documentation of the work for your insurance company and future buyers. That matters when it’s time to sell or renew your policy. A home with updated plumbing is easier to insure, easier to sell, and a whole lot easier to live in without worrying about a middle-of-the-night flood.
Look for blue or orange pipes, usually in your basement, crawl space, or near your water heater. The fittings are brass and often stamped with “Kitec,” “PlumbBetter,” or “IPEX.”
Kitec was installed in homes built between 1995 and 2007, so if your house falls in that range, it’s worth checking. You might also see it connected to your hot water heater or running along your ceiling joists.
If you’re not sure, we’ll come out and do a full inspection. It’s free, and it takes the guesswork out of the equation. Better to know now than find out when a pipe bursts at 2 a.m.
You can, but it’s usually not the smartest move. Kitec leak repair might stop one problem, but the rest of your system is still corroding. You’re just buying time until the next failure.
The total cost of multiple repairs over the next few years often exceeds what a full repipe would cost today. Plus, insurance companies aren’t impressed by patchwork fixes—they want the Kitec gone.
If you’re dealing with an emergency and need a quick fix to stop active flooding, we’ll handle that. But we’ll also give you the honest recommendation for long-term peace of mind, which is usually full replacement.
Most insurance policies won’t pay to replace Kitec proactively—that’s considered a maintenance issue. But if a Kitec pipe bursts and causes water damage, they may cover the damage itself, though not always the pipe replacement.
Here’s the catch: some insurers are now refusing to cover homes with Kitec at all, or they’re requiring an inspection and proof of replacement before they’ll renew your policy. That’s becoming more common as the risk becomes more widely known.
The class action settlement deadline passed in January 2020, so there’s no financial relief coming from that. If you still have Kitec, you’re covering the replacement cost yourself. But doing it now, on your terms, is a lot cheaper than doing it after a flood.
Most full-home repipes take between two and five days, depending on the size of your house, how many bathrooms you have, and how accessible your plumbing is. Single-story homes with crawl space access go faster. Multi-story homes with finished walls take longer.
We work efficiently, but we don’t cut corners. That means shutting off water for portions of the day while we’re working, but we’ll coordinate with you so it’s not a total disruption.
You’ll have running water again by the end of each day in most cases, and we clean up as we go. Once the new system is in and pressure-tested, you’re done—no more Kitec, no more risk.
We typically use PEX or copper, depending on your home’s layout, your budget, and your preferences. PEX is flexible, cost-effective, and handles Meadow Vista’s hard water well without corroding. Copper is more traditional, extremely durable, and some homeowners just prefer it.
Both are light-years better than Kitec. PEX won’t dezincify, and copper has been the gold standard in plumbing for decades. We’ll walk you through the pros and cons of each during your estimate so you can make the call that’s right for your home.
Either way, you’re getting a system that’s code-compliant, insurance-friendly, and built to last 50+ years with proper maintenance.
Call us immediately. We offer 24/7 emergency plumbing services in Meadow Vista, CA, and we’ll get someone out fast to stop the water, assess the damage, and make temporary repairs if needed.
Kitec failures can dump hundreds of gallons of water into your home in a short time, so speed matters. Shut off your main water valve if you can, move valuables out of the area, and get us on the phone.
Once the emergency is handled, we’ll give you a plan for permanent replacement so it doesn’t happen again. Most homeowners who’ve dealt with a Kitec burst don’t wait around after that—they want it gone, and we don’t blame them.
Local Resources
Other Services we provide in Meadow Vista
