Hear from Our Customers
Kitec pipes don’t give you a warning. They burst without notice, flooding rooms in minutes and racking up thousands in water damage before you even know what happened.
If your home was built between 1995 and 2007, there’s a real chance you have Kitec plumbing. The brass fittings corrode from the inside out. The pipes become brittle. And when they fail, it’s not a slow drip you can catch with a bucket.
Replacing your Kitec system in Somerset, CA means you’re choosing to protect your home on your terms. You’re avoiding the emergency call at 2 a.m., the flooded basement, the insurance claim that might not even get approved. You’re keeping your property value intact and your peace of mind in place. That’s what matters.
We’ve been handling plumbing issues across El Dorado County since 2000. We’ve seen what Kitec does to homes in Somerset, CA, especially with the hard water and temperature swings that speed up corrosion.
We’re not a call center or a franchise. You’re getting a California-licensed contractor (C-36 #916322) who shows up on time, gives you a straight answer, and doesn’t pad the estimate. Our Google rating sits at 4.7 out of 5 because we do what we say we’ll do.
When you call us for Kitec repair in Somerset, CA, you’re talking to someone who’s been in these homes before and knows exactly what needs to happen next.
First, we inspect your plumbing with a waterproof camera to see exactly where the Kitec pipes are and what condition they’re in. No guessing. You’ll see what we see.
Then we give you an upfront estimate for full replacement. Most Kitec systems in Somerset, CA need complete removal because patching one section doesn’t stop the rest from failing. We typically replace with copper or PEX, depending on your home’s layout and your budget.
During installation, we work in sections so you’re not without water for days. Most jobs take one to three days depending on the size of your home. We handle permits, cleanup, and any drywall patching that’s needed.
Once it’s done, you’ve got a plumbing system that’ll last decades instead of wondering when the next leak is coming.
Ready to get started?
Our Kitec plumbing services in Somerset, CA cover everything from emergency leak repair to full system replacement. If you’ve got an active leak, we’re available 24/7 to stop the water and assess the damage.
For planned replacements, we handle the camera inspection, the estimate, the removal of old Kitec pipes, and the installation of new copper or PEX lines. We also coordinate with your insurance if you’re filing a claim, though most carriers won’t cover replacement unless there’s already been a failure.
Somerset’s location in the Sierra foothills means your pipes deal with seasonal temperature shifts and mineral-heavy water. Both accelerate Kitec deterioration. We account for that when we recommend materials and installation methods.
You’ll also get documentation of the work, which matters if you’re selling your home. Buyers and inspectors want proof that Kitec has been removed. We make sure you have it.
Check the visible plumbing near your water heater, under sinks, or in your crawl space. Kitec pipes are usually orange or blue, sometimes gray. The fittings are brass and often stamped with “Kitec” or “KTC.”
If your home was built or repiped between 1995 and 2007, the odds are higher. Kitec was popular during that window because it was cheap and easy to install. Builders used it everywhere, especially in developments.
If you’re not sure, call us. We’ll come out and do a camera inspection to confirm what you’ve got. It takes about 30 minutes and you’ll know for certain whether you’re dealing with Kitec plumbing problems in Somerset, CA or not.
Most full Kitec replacements run between $5,000 and $15,000 depending on the size of your home, how much piping needs to be replaced, and whether we’re working with easy access or cutting into walls. Single-story homes with crawl space access cost less. Two-story homes with slab foundations cost more.
Emergency repairs after a burst pipe can add to that total because you’re also paying for water extraction, drywall repair, and mold prevention. That’s why replacing Kitec before it fails saves money in the long run.
We give you an upfront estimate before we start. No surprises. And if you’re a first-time customer, we offer a 15% discount. You’ll know exactly what you’re paying before we touch a pipe.
You can, but it’s a short-term fix. If one section of Kitec has failed, the rest of the system is under the same stress. Patching one leak doesn’t stop the corrosion happening in the fittings you can’t see.
We’ve had customers in Somerset, CA who repaired a leak only to have another section burst six months later. Now they’ve paid for two service calls, two repairs, and they’re still sitting on a ticking clock.
If budget is tight, we’ll do the repair to stop the immediate problem. But we’ll also walk you through what full replacement looks like so you can plan for it. Most people choose to replace once they understand the risk of waiting.
It depends on your policy and whether there’s already been damage. Most insurance companies won’t pay for preventive replacement. They’ll only cover repairs if a pipe has already burst and caused water damage.
Even then, some carriers deny claims if they can prove you knew about the Kitec and didn’t act. That’s why it’s important to document everything and notify your insurer once you know you have Kitec pipes.
We can help with the documentation and work directly with adjusters if you’re filing a claim. But the safest move is to replace the system before it fails. That way you’re not relying on an insurance payout that might not come through.
Emergency leak repairs usually take a few hours. We stop the water, cut out the damaged section, and install a temporary or permanent fix depending on what’s needed.
Full system replacement takes one to three days for most homes. We work in sections so you’re not without water the entire time. You’ll be able to stay in your home during the work.
The timeline depends on how accessible your plumbing is. Homes with crawl spaces or open basements go faster. Homes with finished walls or slab foundations take longer because we’re cutting into drywall and concrete. We’ll give you a clear timeline during the estimate so you know what to expect.
If you’re not home when a Kitec pipe bursts, the water keeps flowing until someone shuts off the main valve or notices the flood. That can mean hours of water damage, ruined floors, soaked drywall, and potential mold growth.
The best prevention is replacing the system before it fails. But if you’re traveling or away often, consider installing a whole-home water shut-off system that detects leaks and stops the flow automatically.
If a burst does happen, call us immediately at (530) 499-2223. We’re available 24/7 for Kitec leak repair in Somerset, CA. We’ll get the water stopped, assess the damage, and start repairs the same day. The faster we respond, the less damage your home takes.
Local Resources
Other Services we provide in Somerset
