Hear from Our Customers
Kitec doesn’t leak when it fails. It bursts. The brass fittings corrode from the inside out, and when they go, you’re dealing with full-scale flooding, not a drip under the sink.
Insurance companies know this. Some won’t cover homes with Kitec anymore. Others will, but with higher deductibles or premiums that make you pay for the risk they don’t want to take.
Replacing kitec plumbing in Kelsey, CA means you’re not scrambling when a pipe lets go at 2 a.m. You’re not filing claims, ripping out drywall in a panic, or explaining to your family why half the house is soaked. You’re ahead of it. Your water pressure improves. Your insurance stays intact. Your home value stops taking a hit every time a buyer’s inspector flags those orange and blue pipes.
We’ve been serving El Dorado County for over a decade. We’re licensed, we show up when we say we will, and we don’t pad the bill with surprise charges at the end.
Kelsey homeowners know what matters: quick response, clean work, and a final cost that doesn’t make you feel like you got taken. We’ve built our reputation on that. If you call us about kitec pipe replacement in Kelsey, CA, we’ll walk you through what’s involved, what it costs, and how long it takes—before we start.
We’re available 24/7 because plumbing emergencies don’t wait for business hours. But the smarter move is replacing Kitec before it becomes an emergency.
First, we assess your system. We need to know where your Kitec runs—through walls, floors, ceilings—and what’s connected to it. Most homes built between 1995 and 2007 in El Dorado County have Kitec in the hot water lines, sometimes in cold lines too.
Next, we map out the replacement. We’re usually swapping Kitec for PEX, which is flexible, durable, and rated to last up to 75 years. PEX also installs faster because it doesn’t require as many fittings, which means less time cutting into your walls.
The actual replacement takes a few days, depending on your home’s size and layout. You can stay in your house during the work. We’ll need to access walls and potentially some flooring, but we’re not tearing apart your entire home. Once the new lines are in, we pressure test everything, restore water service, and patch up access points.
Ready to get started?
When we replace kitec pipes in Kelsey, CA, you’re getting a complete system upgrade. That means removing every section of Kitec—fittings, pipes, connections—and installing new plumbing that meets current code.
Homes in Kelsey sit in an area where water heaters often run hotter than Kitec can handle. Kitec is rated to 82°C, but many water heaters exceed that. The heat accelerates the breakdown of those brass fittings, which is why failures happen faster here than in cooler climates.
After replacement, your water pressure typically improves. Kitec fittings restrict flow as they corrode, so you might not realize how much pressure you’ve been losing until it’s gone. You’ll also eliminate that metallic taste some homeowners notice when Kitec starts breaking down. And if you’re planning to sell, you’re removing a red flag that kills deals or forces you to drop your asking price to cover the buyer’s replacement costs.
Most kitec plumbing replacement projects in Kelsey, CA run between $5,000 and $15,000. The range depends on your home’s size, how much Kitec you have, and how accessible your plumbing is.
Single-story homes with straightforward layouts cost less. Two-story homes or homes with Kitec running through concrete slabs cost more because access is harder. If your Kitec is only in hot water lines, that’s less work than if it’s throughout your entire system.
We’ll give you a clear estimate after we assess your home. No surprises, no inflated numbers. Some of our customers have told us the final bill came in under the original estimate, which doesn’t happen often in this industry.
Most kitec pipe replacement jobs in Kelsey, CA take two to four days. Smaller homes might be done in two. Larger homes with complex layouts might take four or five.
You don’t need to move out. We’ll shut off water for portions of the day while we work, but we’ll restore service by the end of each day so you can use your sinks, toilets, and showers overnight. We’re not leaving you without water for days at a time.
The timeline also depends on how much drywall or flooring we need to open up. If your Kitec runs through easily accessible areas, we move faster. If it’s buried behind tile or finished ceilings, it takes longer. We’ll map that out during the initial assessment so you know what to expect.
Probably not. Most insurance policies don’t cover replacing kitec plumbing in Kelsey, CA unless the pipes have already failed and caused damage. Even then, they’ll cover the water damage—not the cost of replacing the rest of your Kitec system.
Some insurers are starting to require Kitec replacement as a condition of coverage. Others are raising premiums or deductibles for homes that still have it. A few won’t insure homes with Kitec at all.
If you’re shopping for homeowners insurance and you’ve got Kitec, expect questions. If you’re trying to sell, expect buyers to ask for a credit or walk away entirely. Replacing it now keeps your options open and your coverage intact.
They’ll fail. Kitec has a defect rate that experts say will eventually hit 100%. The brass fittings corrode from the inside, and when they go, the pipe bursts. You’re not dealing with a slow leak you can catch early—you’re dealing with a full break that floods your home.
The class action settlement ended in 2011, so you can’t file a claim anymore. You’re responsible for the replacement cost and any damage that happens when the system fails. That damage can run into the tens of thousands if it hits finished spaces, floors, or belongings.
Replacing kitec pipes in Kelsey, CA before they fail costs less than replacing them after a flood. You’re also avoiding the chaos of an emergency—water mitigation crews, insurance claims, temporary housing if the damage is bad enough. It’s not a fun process.
You shouldn’t. Kitec replacement involves accessing plumbing inside walls and floors, working with pressurized water lines, and ensuring everything meets California plumbing code. If you make a mistake, you’re looking at leaks, code violations, or worse—a system that fails sooner than the Kitec you just removed.
Licensed contractors carry insurance. If something goes wrong during the replacement, you’re covered. If you do it yourself and something goes wrong, you’re paying for the damage and the fix. Most homeowners insurance policies won’t cover DIY plumbing work that causes problems.
Professional kitec replacement in Kelsey, CA also means the work gets inspected and signed off. That matters if you ever sell your home. Buyers and their lenders want proof the work was done right. A permit and a licensed contractor’s signature provide that proof.
Most contractors, including us, use PEX. It’s flexible, durable, and rated to handle higher temperatures than Kitec ever could. PEX can last up to 75 years, and it installs faster because it doesn’t need as many fittings.
Copper is another option, but it costs more and takes longer to install. Copper also requires soldering, which means more labor and more time. PEX doesn’t. We can snake it through walls and around corners without cutting as many access points.
Some homeowners ask about CPVC. It’s cheaper than PEX, but it’s also more brittle and doesn’t handle temperature swings as well. In El Dorado County, where temperatures can fluctuate, PEX holds up better. When you’re replacing kitec plumbing in Kelsey, CA, you want something that’ll outlast you—not something you’ll be replacing again in 20 years.
Local Resources
Other Services we provide in Kelsey
