Hear from Our Customers
Your insurance stays intact. No more wondering if today’s the day a fitting blows and floods your kitchen. No more explaining to buyers why your home still has a plumbing system that was pulled from the market nearly two decades ago.
Kitec replacement in Rosemont, CA means you’re back to normal water pressure, reliable hot water delivery, and a system that won’t corrode from the inside out. You’ll have copper or PEX lines that last decades, not years. And when it’s time to sell, you won’t lose buyers over a plumbing system they’ve been warned to avoid.
This isn’t about upgrading for the sake of it. It’s about removing a liability that gets worse the longer it sits in your walls. The homes built or remodeled between 1995 and 2007 in Rosemont are now at the age where Kitec failures spike. Replacing kitec plumbing now means you control the timeline, the cost, and the mess—instead of letting a burst pipe decide for you.
We’ve been handling residential plumbing in the Sacramento area since before Kitec was even banned. We’ve seen what happens when these systems fail, and we’ve replaced enough of them to know what works and what doesn’t.
We’re a family-owned company, fully licensed and insured in California. Our crews show up on time, give you a clear estimate before starting, and clean up when the job’s done. We’re not the cheapest option in Rosemont, CA—and that’s intentional. You’re paying for work that lasts, not work that gets redone in five years.
Rosemont homeowners deal with a mix of older housing stock and newer builds, and we’ve worked in both. We know the layout challenges, the access issues, and how to replace kitec pipes without tearing apart more of your home than necessary.
First, we inspect your system to confirm it’s Kitec and map out where the lines run. You’ll know exactly which walls or floors we’ll need to access. Then we give you a written estimate that includes labor, materials, permits, and any drywall or flooring repair that’s required.
Once you approve, we schedule the work around your availability. Most residential Kitec replacement jobs in Rosemont, CA take between two and five days depending on home size and pipe accessibility. We shut off water to the affected areas, remove the old Kitec lines, and install new copper or PEX piping that meets current California code.
After the new system is in and tested for leaks, we handle the finish work—patching drywall, repainting, replacing access panels. You’re left with a fully functional plumbing system and no visual reminder that work was ever done. We also provide documentation for your records, which helps if you ever sell or need to file an insurance claim.
Ready to get started?
A complete Kitec plumbing replacement in Rosemont, CA covers your hot and cold water lines, including supply lines to fixtures, appliances, and water heaters. We remove all Kitec piping and brass fittings—those fittings are where most failures start due to dezincification.
You’ll get new piping installed with modern materials that won’t degrade over time. Copper is the gold standard for longevity. PEX is faster to install and works well in tight spaces. We’ll walk you through both options and recommend what makes sense for your home and budget.
We also handle the permitting process with Sacramento County, coordinate inspections, and make sure everything is up to code before we close up walls. If your home is in one of the older Rosemont neighborhoods where access is tricky, we plan the work to minimize damage and keep costs predictable. Most homes in this area were built in the ’50s through early 2000s, and we’ve worked in just about every floor plan and foundation type you’ll find here.
This also matters for resale value. Rosemont’s median home values have been climbing, and buyers are paying attention to what’s behind the walls. A disclosed Kitec system can kill a deal or cost you tens of thousands in price reductions.
Check your exposed pipes in the basement, crawl space, or near your water heater. Kitec pipes are usually orange or blue, though some are gray. The fittings are brass and often stamped with “Kitec” or “KTC.”
If your home was built or remodeled between 1995 and 2007, there’s a chance it was installed. It was marketed as a cheaper alternative to copper and showed up in a lot of California developments during that window. You can also check your original plumbing permit or ask your home inspector if you had one during purchase.
If you’re not sure, we can come out and confirm. It takes about 20 minutes to identify the system and give you a straight answer. No charge for that visit if you’re in Rosemont, CA.
Most single-family homes in Rosemont, CA run between $6,000 and $12,000 for a complete Kitec pipe replacement. Smaller homes or condos might come in closer to $5,000. Larger properties with multiple bathrooms or complex layouts can push toward $15,000.
The variables are square footage, how much piping needs to be replaced, and how accessible it is. If we have to open up multiple walls or work around finished basements, that adds time and material. We give you a written estimate after the inspection so there’s no guessing.
Financing is available if you need it. And keep in mind, this isn’t an optional repair—it’s a matter of when, not if. Waiting usually means paying more because you’re dealing with water damage on top of the replacement cost.
Most insurance companies won’t cover the cost to replace Kitec plumbing because it’s considered a maintenance issue, not sudden damage. But if you don’t replace it and a pipe bursts, they may deny your water damage claim entirely—especially if they knew about the Kitec and you didn’t disclose it.
Some carriers in California have started requiring disclosure during underwriting. If they find out you have Kitec, they’ll either raise your premium, exclude water damage coverage, or drop you altogether. That’s becoming more common in Sacramento County as insurers get more cautious.
Replacing kitec pipes now protects your ability to get coverage and file claims later. It also keeps your premiums from spiking. We can provide documentation after the job is done that shows your system has been fully replaced and inspected.
Plan on two to five days for most homes in Rosemont, CA. Smaller homes or condos might be done in two. Larger properties with multiple stories or tricky access can take closer to a week.
We work in stages—demo, rough-in, inspection, then finish work. You’ll have water shut off to certain areas during the day, but we make sure you have working toilets and a way to wash your hands by the time we leave each evening. If you need us to work around your schedule or avoid certain days, we can usually make that happen.
The timeline also depends on whether we’re opening walls or working through existing access points. Homes in older Rosemont neighborhoods sometimes have better access through crawl spaces or unfinished basements, which speeds things up.
No. The fittings fail first, but the pipes themselves degrade over time due to how the system was manufactured. Replacing just the fittings is like putting a new bandage on a broken bone—it doesn’t fix the underlying problem.
The orange and blue Kitec pipes were made with an inner layer that breaks down when exposed to hot water and high chlorine levels, which is common in Rosemont’s municipal water supply. Even if the fittings aren’t leaking yet, the pipe walls are thinning. It’s not a matter of if they’ll fail, it’s when.
A partial replacement also won’t satisfy insurance companies or home buyers. If you’re going to open walls and spend money, do it once and do it right. That means removing all the Kitec and replacing it with a system that’s built to last.
We’ve been doing this for over two decades, and we’ve handled more Kitec replacements in the Sacramento area than most plumbers will see in a career. We know what to look for, how to access the lines without destroying your home, and how to get the job done without dragging it out.
You’ll get a written estimate before we start, and we stick to it unless you ask us to change something. Our crews are licensed, insured, and background-checked. We show up on time, keep the work area clean, and don’t leave until the system is tested and you’re satisfied.
We also offer 24/7 emergency service if a Kitec line fails before you’re able to schedule a full replacement. We’re local, family-owned, and we’ve built our reputation in Rosemont, CA by doing what we say we’ll do. You can check our reviews—most of them mention the same things: fair pricing, fast work, and no surprises.
Local Resources
Other Services we provide in Rosemont
