Hear from Our Customers
Your water pressure stays at a safe 50-65 PSI, protecting every faucet, shower, and appliance in your home. No more sudden pressure drops when someone turns on another tap. No more worrying about your washing machine or dishwasher breaking down from pressure spikes.
You’ll cut your water usage by 25-30%, which means lower utility bills every month. Your plumbing system lasts longer, you avoid expensive emergency repairs, and you reduce energy costs. Most importantly, you get peace of mind knowing your home is protected.
We’ve maintained a 5-star reputation for over 24 years, offering free estimates and fair pricing with extensive residential and commercial plumbing experience. As a small, locally-owned business with low overhead, we keep our plumbing prices down while delivering family-owned quality.
Georgetown’s municipal water pressure often exceeds 100-150 PSI, compared to the maximum 75 PSI that should enter your home. We understand the unique challenges Georgetown homeowners face, from the area’s terrain to aging infrastructure in older homes.
We start by accurately measuring your home’s incoming water pressure, which can vary greatly depending on elevation and how many homes share your main supply. Next, we survey your home to find the best installation location, usually in an easily accessible spot directly next to your main water shut-off valve.
The installation requires cutting off your water supply, fitting the regulator, and restoring water flow. We check all joints and seals for integrity, then adjust the regulator until your pressure is within the correct range. Most installations take about 3 hours, including pressure testing before and after.
Ready to get started?
California Plumbing Code requires water pressure regulators when pressure exceeds 80 PSI, with normal indoor pressure ranging from 45-65 PSI. We handle installation, repair, and replacement of all pressure regulator types for Georgetown homes.
Georgetown homeowners face specific water pressure challenges due to municipal supply pressures that often exceed safe levels for home plumbing systems. The area’s expansive clay soils create additional stress on plumbing infrastructure, with heavy rainfall causing clay expansion and drought creating voids that strain pipes. Our local expertise means we understand these unique conditions and install regulators that handle Georgetown’s specific pressure variations.
You can test your water pressure by buying a pressure gauge from a local hardware store and hooking it up to a hose faucet with all other water-using appliances turned off. You want household plumbing to provide between 30 and 80 PSI.
In Georgetown, municipal water pressure often exceeds 100 or even 150 PSI to supply fire hydrants and all homes on the system, compared to the maximum 75 PSI that should enter your home. California Plumbing Code actually requires a pressure regulator when pressure exceeds 80 PSI. If you’re experiencing appliance problems, pipe noise, or inconsistent water flow, high pressure is likely the culprit.
High water pressure can cause leaking water heaters, dripping faucets, dishwasher and washing machine noise and breakdown, and leaking water pipes. Water flowing at rates higher than necessary becomes damaging, wasteful, and reduces equipment life expectancy.
Excessive water pressure is actually the leading cause of most household plumbing problems and wastes gallons of potable water, raising your water, energy, and sewer bills. Anything over 80 PSI will void your water heater warranty. Georgetown’s high municipal pressure puts constant stress on your home’s plumbing, leading to premature failures and expensive repairs.
Most water pressure regulators last 10 to 15 years, though you may see a regulator malfunction at three years or one still functioning at 20 years if regularly maintained. On average, regulators last 4 to 12 years, and we recommend replacing them every five years to prevent potential plumbing issues.
Like all plumbing fixtures and valves, water pressure regulators can clog and will eventually fail. If you notice water hammering, pressure changes, or other inconsistencies, have your regulator checked immediately. Georgetown’s mineral-rich water and pressure variations can affect regulator lifespan, so regular maintenance is key.
The average cost to replace a water pressure regulator ranges from $300 to $650 for most homes, including labor and materials. Labor costs range from $225 to $450, with most installations taking about 3 hours to test pressure, shut off water, replace the regulator, and re-test.
If you’re replacing an existing regulator, it’s usually a straightforward swap-out procedure, especially with the same size and manufacturer. Expect to pay between $150 and $250 for replacement, depending on the regulator type. We provide free estimates and transparent pricing, so you’ll know the exact cost before any work begins.
With the right tools, you can adjust your pressure regulator in a few steps using a wrench or screwdriver and pliers. It’s not necessary to turn off the water supply to adjust a pressure regulator.
However, if you find that after adjusting the regulator there’s no change in the gauge reading, your pressure regulator may need replacement and you should contact a licensed plumber. While adjustment is possible with the right tools and instructions, many homeowners prefer calling a plumber for proper diagnosis and service. Georgetown’s specific pressure challenges often require professional expertise to ensure proper calibration.
Schedule water pressure regulator services if you notice signs like water hammering in the walls or are experiencing water pressure variances or inconsistencies. Watch for sudden changes in water pressure, constantly leaking pressure relief valves on the regulator, or visible damage and wear on the regulator.
If you notice any of these signs, don’t postpone the repair. Replace your water pressure regulator as soon as possible to prevent further damage to your plumbing system. Many residents only become aware they have a pressure regulator when it fails and the resulting high water pressure causes damage inside their home. Regular annual testing helps catch problems before they become expensive emergencies.
Local Resources
