Hear from Our Customers
You shouldn’t have to wonder if today’s the day your pipes give out. Kitec systems fail because the brass fittings break down over time, and when they go, they flood your home fast.
A Kitec repipe in North Highlands, CA means you get consistent water pressure again. No more leaks hiding in your walls. No more rusty water or that metallic taste you’ve been ignoring.
Most homes with Kitec are now 15 to 20 years old, which puts them right in the failure zone. The longer you wait, the higher the risk. Repiping now protects your home, your belongings, and your peace of mind before an emergency forces your hand.
We’ve been serving the Greater Sacramento area with fast, reliable plumbing services. We’ve seen what Kitec failures do to North Highlands homes, and we know how to replace them the right way.
Our team identifies Kitec piping quickly, gives you a clear assessment, and walks you through your options. We handle the full job: removing old pipes, installing new copper or PEX, and finishing the drywall, texture, and paint so your home looks normal again.
We’re available 24/7 for emergencies, and our pricing is transparent. Some of our customers have told us the final bill came in lower than the estimate, which doesn’t happen often in this industry.
First, we inspect your plumbing to confirm whether you have Kitec and where it’s installed. A lot of homeowners get mixed answers from different plumbers, so we make sure you know exactly what you’re dealing with.
Once we map out the system, we give you a detailed estimate that includes the piping, labor, and all finish work. No surprises later. Then we schedule the work around your life, not ours.
During the repipe, we remove the old Kitec pipes and replace them with durable materials like copper or PEX. We protect your floors and furniture, keep the work area contained, and clean up daily. After the new pipes are in, we patch, tape, texture, and paint so the walls look like we were never there.
The whole process usually takes a few days depending on your home’s size. You’ll have water back on quickly, and the system will be tested before we call it done.
Ready to get started?
A full Kitec repiping service in North Highlands, CA covers everything from start to finish. You get complete removal of the old Kitec system and installation of new piping throughout your home. We use quality materials that last decades, not years.
The job includes all the finish work: drywall repair, taping, texturing, and paint matching. Most repipe companies subcontract that part out. We handle it, so you’re not coordinating with multiple crews or waiting weeks for someone to close up your walls.
In North Highlands, many homes from the late 90s and early 2000s have Kitec in both hot and cold water lines. That means the risk isn’t isolated to one area. Our repiping addresses the entire system so you’re not left with half a fix.
Depending on your home’s size, a complete residential Kitec repiping typically costs between $5,000 and $30,000. That includes materials, labor, and finish work. It’s not a small expense, but it’s a fraction of what water damage and mold remediation cost after a catastrophic pipe failure.
Kitec pipes are usually orange or blue, though sometimes they’re gray. The fittings are brass and often stamped with “Kitec” or the brand names IPEX, PlumbBetter, or KTC.
Check exposed pipes in your basement, crawl space, utility room, or under sinks. If your home was built or repiped between 1995 and 2007, the chances are higher. A lot of North Highlands properties from that era used Kitec because it was cheap and easy to install.
If you’re not sure, call us. We can identify Kitec during a quick inspection and tell you how much of your system is affected. Some homes only have it on water heaters or in specific zones, while others have it throughout the entire house.
Kitec pipes fail. It’s not a matter of if, it’s when. The brass fittings corrode from the inside out in a process called dezincification, which weakens the connection points until they crack or burst.
When that happens, you get flooding. It can be slow leaks that rot your walls and grow mold, or it can be a full rupture that dumps gallons of water into your home in minutes. Either way, the damage is expensive and stressful.
The longer Kitec stays in your home, the higher the risk. Most systems are now well past their expected lifespan. Repiping before a failure gives you control over the timeline and the cost, instead of scrambling during an emergency with water pouring into your living room.
Most whole-house Kitec repiping jobs take between two and five days, depending on the size of your home and how much of the system needs replacing. Single-story homes with straightforward layouts go faster. Multi-story homes or places with complex plumbing take longer.
We work efficiently and keep disruption to a minimum. You’ll have water shut off during active work hours, but we restore service at the end of each day whenever possible so you’re not left without water overnight.
The finish work—patching drywall, texturing, and painting—adds a bit of time, but it’s included in the timeline. We don’t leave until your walls look right. From start to finish, you’re looking at about a week for most North Highlands homes, including cleanup.
You can repair individual leaks, but it’s a short-term fix. Kitec fails because of a systemic problem with the materials, not because of one bad section. If one fitting corroded enough to leak, the rest are likely close behind.
Repairing one spot might buy you a few months, but you’ll be calling a plumber again soon. And each time you do, you’re paying for labor, parts, and drywall repair. Those costs add up fast and often exceed what a full repipe would have cost in the first place.
A complete Kitec repipe in North Highlands, CA solves the problem for good. You’re not patching over a failing system—you’re replacing it with materials that won’t break down the same way. It’s a bigger investment upfront, but it’s the only way to actually stop the cycle of leaks and repairs.
We typically use either copper or PEX piping, depending on your home’s layout and your preferences. Both are proven, durable materials that won’t have the same failure issues as Kitec.
Copper is the traditional choice. It lasts 50+ years, handles high temperatures, and doesn’t degrade. It costs a bit more and takes longer to install because it requires soldering, but it’s rock-solid. PEX is flexible, faster to install, and costs less. It’s been used in homes for decades and holds up well in residential applications.
We’ll walk you through the pros and cons of each during your estimate. There’s no wrong choice here—both will give you a reliable system that outlasts Kitec by a long shot. What matters most is getting the old pipes out and the new ones in before you’re dealing with a flooded home.
Yes. A whole-house repipe removes a major red flag for buyers and appraisers. Kitec is a known liability, and homes with it often struggle during inspections or financing. Replacing it shows the plumbing system is sound and won’t need major work for decades.
In North Highlands, CA, where many homes from the late 90s and early 2000s still have original plumbing, a recent repipe is a strong selling point. It also prevents issues down the line if you’re planning to stay—better water pressure, no leaks, and no emergency repairs.
Even if you’re not selling soon, repiping protects your investment. Water damage from burst pipes can cost tens of thousands to repair, and it often leads to mold, structural issues, and insurance headaches. A repipe now keeps your home safe and market-ready whenever you decide to move.
Local Resources
Other Services we provide in North Highlands
