Kitec Replacement in Foothill Farms, CA

Stop Waiting for Your Pipes to Fail

If you’ve got Kitec plumbing in Foothill Farms, CA, you already know the clock is ticking. Let’s replace it before it costs you thousands in water damage.
Two yellow gas pipes with metal valves and handles are installed through a rectangular opening in a wall. The pipes and valves show signs of wear and some corrosion.

Hear from Our Customers

A crawl space beneath a building in El Dorado County shows exposed pipes, wooden beams, and support columns. A plumber’s yellow toolbox is partially visible—ideal for water heater replacement or repairs in El Dorado County, CA.

Professional Kitec Replacement Foothill Farms

Keep Your Insurance and Your Peace of Mind

Your insurance company isn’t being dramatic when they flag Kitec plumbing. They’ve seen what happens when these pipes fail, and they don’t want to pay for it. Neither do you.

Replacing Kitec plumbing in Foothill Farms, CA means you’re not gambling with your home anymore. No more wondering if today’s the day a fitting cracks and floods your kitchen. No more calls from your insurance agent about coverage changes or premium hikes.

You get modern piping that actually works. You keep your coverage intact. And if you’re planning to sell, you’re not scaring off buyers or renegotiating after inspection. The work gets done once, gets done right, and you move on with your life.

Kitec Replacement Contractor Foothill Farms CA

We've Been Doing This for 24 Years

We’ve been handling plumbing in the Sacramento area since 2001. We’re not new to Kitec pipe replacement in Foothill Farms, CA, and we’re not learning on your dime.

Most homes in Foothill Farms were built in the 1970s and 1980s, but plenty of additions and renovations between 1995 and 2007 brought Kitec into the mix. We’ve seen it in crawl spaces, behind walls, feeding water heaters. We know where it hides and how to get it out without tearing your house apart.

You’ll work with licensed plumbers who show up on time, explain what needs to happen, and give you a real number before any work starts. No surprises, no upselling, no runaround.

A plumber El Dorado County, CA, wearing a cap and glasses repairs copper pipes inside a wall. Tools and pipe fittings are scattered on the ground and in a toolbox nearby. A cutout in the wall reveals the plumbing.

Kitec Plumbing Replacement Process Foothill Farms

Here's What Happens When You Call

First, we come out and look at your system. We’re checking where your Kitec runs, what condition the fittings are in, and what it’ll take to replace it. You get a written estimate that covers everything, including any drywall or paint touch-ups afterward.

Once you’re ready to move forward, we schedule the work around your life. Most Kitec replacement jobs in Foothill Farms, CA take two to four days depending on your home’s size and layout. We shut off water to specific areas as we go so you’re not completely without service the whole time.

We pull out the old Kitec and install new piping—usually PEX or copper, depending on your preference and budget. We test everything, handle inspections if needed, and patch walls back up. When we leave, your plumbing works and your house looks like we were never there.

A close-up of exposed pipes and insulation in a wooden wall with burn marks and scorch stains, along with a few rags hanging on the pipes—possible signs that call for a plumber El Dorado County, CA, to inspect or handle water heater replacement.

Ready to get started?

Explore More Services

About Murray Plumbing

Get a Free Consultation

Replace Kitec Pipes Foothill Farms CA

What You're Actually Paying For

When you hire us for Kitec pipe replacement in Foothill Farms, CA, you’re getting complete removal of the old system and installation of new piping that meets current code. That includes all fittings, connections, shut-off valves, and pressure testing.

We also handle the finish work. If we open a wall to access pipes, we close it back up, tape, texture, and paint to match. You’re not calling another contractor to fix what we tore apart.

In Foothill Farms, most homes we work on are single-story with slab foundations or crawl space access. That usually makes the job more straightforward than multi-story homes, but it depends on how your plumbing was originally run. We’ll know after the inspection and we’ll tell you exactly what your situation looks like. The cost typically falls between $5,000 and $15,000 for a standard three-bedroom home here, but your quote will reflect your actual layout and scope.

A plumber El Dorado County, CA in a blue uniform installs a new kitchen faucet at a black sink, holding faucet parts while tools and plants are visible on the nearby counter.

How do I know if I have Kitec plumbing in my Foothill Farms home?

Look for plastic pipes with brass fittings, usually marked with “Kitec” or “KTC” on the pipe itself. The pipes are often orange or blue, though sometimes they’re black or gray.

Check near your water heater, under sinks, and in your crawl space or attic if you have access. The fittings are the giveaway—they’re brass-colored and connect the plastic pipe sections. If you see a white, chalky buildup around those fittings, that’s zinc oxide from dezincification, which means the fittings are already breaking down.

If you’re not sure, take a photo and text it to us. We can usually tell you right away if it’s Kitec. If it is, we’ll schedule a time to come out and assess the full system so you know what you’re dealing with.

Some insurance companies will. Others will keep you on but raise your premiums or add exclusions so they won’t cover water damage caused by pipe failure.

It depends on your carrier and your policy. If they’ve already sent you a notice about Kitec, they’re serious. Ignoring it usually means non-renewal when your policy is up, or they’ll remove coverage for water damage entirely, which defeats the purpose of having homeowners insurance.

Even if your insurer hasn’t flagged it yet, it’s worth replacing. A single pipe burst can cause $10,000 to $50,000 in damage once you factor in flooring, drywall, furniture, and mold remediation. That’s a lot more expensive than replacing the pipes before they fail.

Most jobs take two to four days. Single-story homes with accessible crawl spaces or attic runs usually fall on the shorter end. Homes with complex layouts or limited access take longer.

We’re not tearing your whole house apart at once. We work in sections so you still have water to at least one bathroom and your kitchen for most of the job. We’ll map out the schedule during the estimate so you know what to expect each day.

The finish work—patching drywall and painting—happens as we go or right after the plumbing is done. We don’t leave holes in your walls for weeks. By the time we’re finished, the plumbing is tested, the walls are closed, and everything’s cleaned up.

We typically use PEX or copper, depending on what makes sense for your home and your budget. PEX is flexible, faster to install, and costs less. It’s also resistant to freezing and corrosion, which makes it a solid choice for most residential applications.

Copper costs more and takes longer to install, but some homeowners prefer it because it’s been around forever and has a proven track record. Both options are code-compliant and will outlast Kitec by decades.

We’ll walk you through the pros and cons of each during your estimate. There’s no wrong choice here—it’s about what fits your priorities and your budget. Either way, you’re getting a system that won’t fail in ten years.

No. The fittings are the main problem, but the pipe itself also degrades over time. Replacing just the fittings is like putting new tires on a car with a cracked engine block—you’re not actually solving anything.

The dezincification process affects the brass fittings, but the pipe can become brittle and prone to cracking as it ages. Even if the pipe looks fine now, it’s all part of the same defective system that was recalled in 2005.

If you’re going to the trouble and expense of opening walls and accessing your plumbing, replace the whole system. Doing it halfway means you’ll be back in the same spot in a few years, except now you’ve already spent money once and you’re spending it again.

For most homes in Foothill Farms, you’re looking at $5,000 to $15,000. Smaller homes with straightforward layouts fall on the lower end. Larger homes or homes with multiple stories and complicated plumbing runs cost more.

That price includes removing all the old Kitec, installing new pipe, replacing fittings and valves, testing the system, and patching any drywall we had to open. We also include paint touch-ups so your walls don’t look like a construction zone when we’re done.

We give you a written estimate after we inspect your home, so you’ll know the exact cost before we start. No hourly rates, no surprise charges. The number we give you is the number you pay.

Other Services we provide in Foothill Farms