Hear from Our Customers
Your Kitec system has a 100% failure rate coming. Not might fail—will fail. The fittings are recalled, the pipes are deteriorating, and Parkway’s hard water is accelerating the timeline.
When you replace Kitec pipes in Parkway, CA with us, you’re not just swapping out plumbing. You’re removing a ticking time bomb from your walls. You’re getting your insurance company off your back. You’re protecting your property value so the next buyer doesn’t walk away or lowball your asking price.
Most importantly, you’re done worrying about coming home to a flooded house. The job takes a few days. The peace of mind lasts decades. Copper pipes come with a 50-year warranty and can last a century. That’s what you’re actually paying for—certainty.
We’ve been handling kitec plumbing replacement in Parkway, CA and across Sacramento County for years. We’ve seen what happens when homeowners wait—and what it costs them.
Parkway sits in an area where thousands of homes were built during the late 1990s and early 2000s, right when Kitec was being installed everywhere. That means your neighbors likely have it too. Some have already dealt with leaks. Others are waiting for the call we get at 2 a.m. when a fitting finally gives out.
We’re not here to scare you. We’re here to give you a straight answer, a fair price, and a crew that shows up when we say we will. Our reviews reflect that—4.9 out of 5 stars across hundreds of jobs. People call us because we pick up the phone, even on weekends, and we don’t inflate the estimate once we’re on-site.
First, we come out and assess your home. We locate every section of Kitec—hot and cold lines, behind walls, under floors. You’ll know exactly what needs to go and what it’ll cost before we touch a pipe.
Then we schedule the replacement. Most kitec pipe replacement jobs in Parkway, CA take two to four days depending on your home’s size and layout. We remove the old Kitec system completely—pipes and fittings—and install new copper or PEX. We don’t patch. We don’t leave sections behind. It all comes out.
During the job, you can stay in your home. We work clean, we move fast, and we don’t leave a mess. Once it’s done, you get a system that’s code-compliant, insurable, and built to last. We test everything, walk you through what we did, and hand you documentation your insurance company and future buyers will actually want to see.
Ready to get started?
When we handle your kitec replacement in Parkway, CA, you’re getting a complete system overhaul. That means removing every inch of Kitec pipe and every brass fitting from your property. We replace it with either copper or PEX—your choice, and we’ll explain the pros and cons of each based on your home and budget.
You also get transparency. We don’t surprise you with costs once the walls are open. Our estimates are detailed, and our final invoices typically come in at or below what we quoted. That’s not something you hear often in this industry, but it’s how we’ve built our reputation here.
And if something goes wrong after hours, we’re available. Kitec doesn’t wait for business hours to fail, and neither do we. Our 24/7 emergency service means you’re covered if a pipe bursts while we’re mid-job or years down the line. Parkway homeowners deal with enough—your plumber shouldn’t add to the stress.
Look for orange or blue pipes, usually near your water heater, under sinks, or in your basement or crawl space. Kitec pipes are often labeled with “Kitec” or “KTC” printed on the pipe itself. The fittings are brass and tend to look bulkier than standard plumbing connections.
If your Parkway, CA home was built or renovated between 1995 and 2007, there’s a higher chance Kitec was installed. That’s when it was most commonly used across the Sacramento area. A lot of developments in and around Parkway went up during that window.
If you’re not sure, call us. We can come out, take a look, and tell you definitively whether you’ve got Kitec. There’s no charge for us to identify it, and you’ll have a clear answer either way.
Most full kitec replacement jobs in Parkway, CA run between $5,000 and $15,000, depending on the size of your home, how much Kitec is installed, and whether you choose copper or PEX as the replacement. Larger homes or properties with complex layouts can cost more.
That might sound like a lot, but compare it to water damage. A single burst pipe can easily cause $10,000 to $30,000 in damage to floors, drywall, furniture, and belongings. And many insurance companies won’t cover flooding caused by Kitec because it’s a known defect.
We give you a detailed estimate before we start. No hidden fees, no surprise charges once the walls are open. What we quote is what you pay, and in many cases, our final cost comes in lower than the original estimate.
Most kitec pipe replacement projects take between two and four days. The timeline depends on your home’s size, how accessible your plumbing is, and whether we’re replacing just the hot water lines or the entire system.
You can stay in your home during the work. We’re not tearing the place apart—we’re making surgical cuts where needed, removing the old Kitec, and installing the new pipes. We clean up as we go, and we don’t leave your house looking like a construction zone.
If you need it done faster because of an insurance deadline or a real estate closing, let us know. We’ve handled rush jobs before, and we’ll do what we can to meet your timeline without cutting corners.
Yes. Kitec kills deals. Buyers either walk away when they see it on the inspection report, or they use it to negotiate your price down by thousands. Some won’t even make an offer if they know Kitec is in the house.
Replacing kitec plumbing in Parkway, CA before you list removes that obstacle entirely. You can market your home with confidence, and buyers won’t have a reason to lowball you or demand concessions. Copper or PEX plumbing is what buyers expect, and it’s what appraisers want to see.
If you’re selling soon, do this first. It’s one of the few repairs that directly protects your sale price and speeds up the closing process. And you’ll have documentation proving the work was done by a licensed contractor, which buyers and their lenders will ask for.
No. Kitec fittings are no longer manufactured, and the pipes themselves are incompatible with standard plumbing fittings. Even if you patch one leak, the rest of the system is still failing. You’re just buying time—maybe weeks, maybe months—before the next section goes.
The defect is in the material itself. The brass fittings corrode from the inside out, especially in areas like Parkway where the water is hard. There’s no way to stop that process. Replacing one section doesn’t fix the problem; it just delays the inevitable.
Insurance companies know this. That’s why many won’t cover homes with Kitec, or they’ll raise your deductible if you have it. The only real solution is complete replacement. Anything else is throwing money at a system that’s already been recalled.
Yes. If your Kitec system bursts or starts leaking, call us immediately. We offer 24/7 emergency plumbing service in Parkway, CA, and we’ll get someone to your home fast to stop the leak and assess the damage.
Emergency situations are exactly why we stay available around the clock. Kitec doesn’t fail on a schedule, and we’ve seen too many homeowners deal with middle-of-the-night floods because they couldn’t reach a plumber. That won’t happen if you call us.
Once we’ve handled the immediate crisis, we’ll walk you through your options for full replacement. Most people who call us for an emergency end up scheduling the complete kitec replacement within days, because they don’t want to go through that stress again. We’ll make it as fast and painless as possible.
Local Resources
Other Services we provide in Parkway
