Hear from Our Customers
If your Rancho Murieta home was built or remodeled between 1995 and 2007, there’s a real chance you have Kitec plumbing. And if you do, it’s not a question of if it fails—it’s when.
Kitec fittings were made with high-zinc brass that breaks down over time. The result is sudden pipe bursts, often without warning, that can flood your home in minutes. Water damage repairs run anywhere from a few hundred dollars to over $50,000 depending on how fast you catch it and what gets destroyed.
Beyond the immediate damage, Kitec creates long-term problems. Insurance companies either won’t cover homes with it, charge higher premiums, or require you to replace it to maintain your policy. Mortgage lenders hesitate to approve loans on properties with Kitec still installed. And when it comes time to sell, buyers either walk away or demand significant price reductions.
Replacing Kitec plumbing in Rancho Murieta means you’re protecting your home’s value, maintaining your insurability, and avoiding a disaster that could cost you tens of thousands in repairs. You get modern PEX or copper piping that lasts decades, installed by licensed professionals who know how to do the job right the first time.
We’ve been serving Rancho Murieta and the surrounding Sacramento region with a 4.7-star rating built on fast response times, transparent pricing, and professional work. We’ve seen firsthand how Kitec failures impact homeowners in your area—sudden bursts on hot water lines, insurance complications, and the stress of dealing with water damage.
Our team knows the local housing stock. Many Rancho Murieta homes were built during the exact window when Kitec was widely installed, and we’ve worked with homeowners throughout the community to remove it before it becomes a crisis.
You’ll get a clear assessment of your system, upfront pricing that often comes in lower than the original estimate, and a complete replacement done in days while you stay in your home. We’re licensed, insured, and available 24/7 for emergencies—because pipe bursts don’t wait for business hours.
First, we inspect your plumbing system to confirm you have Kitec and assess the full scope of what needs replacing. Kitec is identifiable by its orange or blue piping and brass fittings with “Kitec” stamped on them. We’ll map out where it runs through your home so you know exactly what’s involved.
Next, we remove the old Kitec piping and fittings. This includes both hot and cold water lines, since the fittings on both sides are prone to failure. We take care to minimize wall and ceiling damage, though some access points will need to be opened to reach the pipes.
Then we install your new system—either PEX or copper, depending on your preference and budget. PEX is flexible, cost-effective, and can last up to 75 years. Copper is the traditional choice and has proven durability over decades. Both are massive upgrades over Kitec.
Finally, we test the entire system for leaks, restore water service, and patch any access points we created. The whole process typically takes a few days for a complete home repipe. You can stay in your home during the work, and when we’re done, you’ll have a plumbing system you can actually trust.
Ready to get started?
A full Kitec replacement contractor service covers every part of your water supply system that contains Kitec materials. That means removing all the orange and blue piping, replacing every brass fitting, and installing a completely new distribution system from your main water line to every fixture in your home.
In Rancho Murieta, where home values average $660,000 and properties tend to be larger, repiping costs typically range from $5,000 to $30,000 depending on square footage and how much Kitec is present. That includes removal, new pipe installation, wall restoration, and testing.
You’re not just getting new pipes. You’re eliminating a known liability that affects your insurance, your resale value, and your peace of mind. Rancho Murieta homeowners have already experienced premature Kitec failures and pipe bursts—it’s a documented issue in this area. Replacing it now means you’re addressing the problem on your timeline, not in the middle of a flooding emergency at 2 a.m.
The work is disruptive for a few days, but it’s far less disruptive than dealing with water damage, insurance claims, and temporary displacement after a burst pipe floods your home.
Check your exposed pipes in the basement, crawl space, or near your water heater. Kitec piping is either bright orange or blue, and the fittings are brass with “Kitec” or “KTC” stamped on them. It was commonly installed between 1995 and 2007, so if your home was built or remodeled during that time, there’s a strong possibility it’s present.
You can also look at your original plumbing permits or builder documentation if you have access to those records. If you’re unsure, a licensed plumber can identify it quickly during an inspection.
Don’t ignore it if you find it. Even if your system hasn’t failed yet, the failure rate is high enough that industry professionals consider it inevitable. The longer you wait, the more you’re gambling with water damage and insurance complications.
For most homes in Rancho Murieta, complete Kitec plumbing replacement runs between $5,000 and $30,000. The range depends on your home’s size, how much Kitec is installed, and whether you choose PEX or copper as the replacement material.
Smaller homes with limited Kitec in specific areas will be on the lower end. Larger properties with Kitec throughout the entire water distribution system will cost more. The price includes removing all the old piping and fittings, installing the new system, testing for leaks, and repairing any walls or ceilings we need to access.
It’s a significant expense, but compare that to water damage repair costs that can exceed $50,000, plus the loss of personal belongings, temporary housing, and increased insurance premiums. Replacing Kitec proactively is far cheaper than dealing with it after a catastrophic failure.
Most homeowners insurance policies won’t pay to replace Kitec as a preventive measure. They’ll only cover damage that results from a sudden pipe burst—and even then, many insurers are starting to exclude Kitec-related claims or require you to replace the system to maintain coverage.
Some insurance companies charge higher premiums if they know you have Kitec. Others will refuse to renew your policy unless you remove it within a certain timeframe. And if you’re shopping for new coverage, you may find that insurers won’t even write a policy on a home with Kitec still installed.
The best approach is to contact your insurance provider and ask about their Kitec policy. If they’re requiring replacement or threatening non-renewal, you’ll want to act quickly. Even if they’re not pushing you yet, replacing it now protects your insurability and your ability to file claims in the future.
A complete home repipe typically takes between three and five days, depending on the size of your house and how much Kitec needs to be removed. Smaller homes or partial replacements can be done faster. Larger properties with complex plumbing layouts may take a bit longer.
You can stay in your home during the work, though your water will be shut off for portions of each day while we’re making connections and testing the system. We’ll coordinate with you to minimize disruption and make sure you have water access when you need it most.
The process involves opening some walls and ceilings to access the pipes, so there will be some patching and repair work at the end. Most contractors include basic drywall repair in their pricing, but you may need to repaint or do finish work depending on how extensive the access points are.
Both PEX and copper are solid choices that will outlast Kitec by decades. PEX is flexible, easier to install, and typically costs less. It’s resistant to freezing, doesn’t corrode, and can last up to 75 years. It’s become the standard for repiping jobs because it’s reliable and cost-effective.
Copper is the traditional option. It’s been used in plumbing for over a century, and it has a proven track record. Copper is more expensive and takes longer to install because every joint has to be soldered, but some homeowners prefer it for its longevity and the fact that it’s been around forever.
In Rancho Murieta, where homes tend to be higher-value properties, both materials are appropriate. The choice often comes down to budget and personal preference. If you want the most affordable option that still gives you decades of reliable service, PEX is the way to go. If you want the traditional approach and don’t mind paying more, copper works just as well.
If a Kitec pipe bursts, you need to shut off your main water supply immediately to stop the flooding. Then call an emergency plumber—we offer 24/7 service for exactly this kind of situation. The faster you respond, the less damage you’ll deal with.
Water damage from a burst pipe can range from minor to catastrophic depending on where the pipe fails and how long water flows before it’s stopped. You could be looking at ruined flooring, damaged drywall, destroyed furniture, and even structural issues if water gets into walls or ceilings. Repair costs can easily hit $10,000 to $50,000 or more.
After the immediate emergency is handled, you’ll need to file an insurance claim, deal with water remediation and mold prevention, and then replace the Kitec system anyway to prevent it from happening again. It’s far better to replace Kitec on your own timeline than to deal with it in the middle of a crisis.
Local Resources
Other Services we provide in Rancho Murieta
