Hear from Our Customers
You already know Kitec is a problem. Maybe your home inspector flagged it during a sale, or your insurance company sent a letter. Maybe you’re just tired of wondering if today’s the day those pipes finally give out.
Here’s what matters: Kitec pipe replacement isn’t about if, it’s about when. These pipes started failing around 2005, and the failure rate keeps climbing. The brass fittings corrode, the plastic degrades, and eventually, you’re dealing with a flooded home and an insurance claim that might not even get approved.
Replacing Kitec plumbing in Walnut Grove, CA means you sleep better. Your home stays insurable. Your property value doesn’t tank when it’s time to sell. And you’re not gambling on whether those pipes hold up through another summer or winter.
You get modern, reliable plumbing that actually lasts. You get your home back to a place where water damage isn’t hanging over your head. And you get to move forward without that constant low-grade stress every time you hear water running through the walls.
We’ve been serving Walnut Grove and Sacramento County for years, and we’ve seen what Kitec does to homes in this area. A lot of properties here were built between 1995 and 2007, right when Kitec was being installed across California. That means a lot of homes are sitting on borrowed time.
We’re local, licensed (CA Lic #916322), and we show up when we say we will. Our pricing is transparent—no surprise fees, no upselling you on things you don’t need. We’ve earned a 4.7-star rating from 93 customers who appreciate that we do the work right the first time.
You’re not hiring a national chain that doesn’t know Walnut Grove. You’re hiring a contractor who understands the local housing stock, the water conditions, and what it takes to repipe a home without tearing your life apart in the process.
First, we come out and assess your system. We identify every section of Kitec in your home—hot water lines, cold water lines, fittings, manifolds. We map out the scope so you know exactly what needs to go.
Then we give you a written estimate. No guessing, no “we’ll see when we get in there.” You know the cost upfront, and in many cases, the final bill comes in lower than the estimate.
Once you’re ready to move forward, we schedule the work around your life. We remove the old Kitec and replace it with durable, code-compliant piping—typically PEX or copper, depending on your home and budget. We work efficiently to minimize disruption, and we make sure you have basic water service restored each evening if the job runs multiple days.
After the pipes are in, we handle the wall repair and cleanup. You’re not left with a mess or a list of contractors to call. We finish the job, test everything, and make sure your water system is solid before we leave.
Ready to get started?
Replacing Kitec plumbing means pulling out every compromised section and replacing it with materials that won’t fail in 10 years. That includes the main water lines, branch lines to fixtures, and all the brass fittings that corrode from the inside out.
In Walnut Grove, CA, most homes we work on are older properties with unique layouts. We don’t cut corners or leave sections of Kitec “because they look fine.” If it’s Kitec, it comes out. That’s the only way to actually solve the problem.
You also get wall patching, paint touch-ups, and a cleanup crew that doesn’t leave your home looking like a construction site. We coordinate with you to prioritize critical areas—kitchens, bathrooms, laundry—so your daily routine isn’t completely upended.
And because we’re local, we understand what Walnut Grove homeowners are dealing with. Insurance companies are getting stricter. Home inspectors are flagging Kitec more often. Buyers are walking away from homes that still have it. Professional Kitec replacement in Walnut Grove, CA keeps your home marketable, insurable, and safe.
Most Kitec plumbing replacement projects in Walnut Grove, CA run between $5,000 and $15,000, depending on the size of your home and how much Kitec is in the system. Smaller homes with straightforward layouts tend to fall on the lower end. Larger homes with multiple bathrooms, complex plumbing runs, or difficult access points cost more.
We give you a written estimate after we assess your home. No diagnostic fees, no charges just to tell you what’s wrong. You’ll know the cost before we start, and we don’t tack on surprise expenses halfway through the job.
The price includes removing all the Kitec, installing new piping, repairing walls, and cleaning up. You’re not paying for the pipes and then getting handed a separate bill for drywall or paint. It’s a complete service, start to finish.
Probably not. Most homeowners insurance policies don’t cover the cost of replacing Kitec because it’s considered a maintenance issue, not sudden damage. They’ll cover the water damage if a pipe bursts, but they won’t pay to replace the system before it fails.
That said, some insurance companies are starting to require Kitec replacement as a condition of coverage. If your insurer has flagged it, you might be facing higher premiums or even a policy cancellation if you don’t address it. That’s becoming more common in California, especially in areas like Walnut Grove where a lot of homes were built during the Kitec era.
The class action settlement from 2012 offered some reimbursement, but the deadline to file claims has passed. At this point, replacement costs come out of your pocket. The good news is that replacing Kitec now is a lot cheaper than dealing with a flooded home and a denied insurance claim later.
Most jobs take two to five days, depending on the size of your home and how much Kitec is in the system. A small home with a simple layout might be done in two days. A larger home with multiple bathrooms and complex plumbing runs could take a full week.
We work efficiently, but we don’t rush. Cutting corners on a repipe just creates more problems down the road. We make sure every connection is solid, every line is tested, and every wall is patched properly before we call it done.
During the job, we restore basic water service each evening whenever possible. You won’t be without water for days on end. We coordinate with you to prioritize the areas you need most—kitchen, bathrooms, laundry—so your daily routine isn’t completely disrupted. Once the pipes are in and tested, we handle the finish work and cleanup so you’re not left with a mess.
You can, but it’s going to cost you. Buyers know about Kitec, and most won’t touch a home that still has it unless the price reflects the replacement cost. That means you’re either dropping your asking price by $10,000 or more, or you’re sitting on the market longer while buyers pass you by.
Home inspectors flag Kitec every time. Real estate agents ask about it before they even show the property. And buyers who are willing to take on the risk will negotiate hard, knowing they’re inheriting a problem that needs to be fixed immediately.
You’re also legally required to disclose Kitec if you know it’s there. Failing to disclose it can lead to lawsuits after the sale. The smarter move is to replace Kitec pipes before you list. You’ll get a better price, sell faster, and avoid the headache of renegotiating after the inspection. Buyers in Walnut Grove, CA are savvy—they know what Kitec means, and they’re not going to overlook it.
The problem with Kitec is that you often don’t get warning signs. The brass fittings corrode from the inside, so by the time you see a leak, the damage is already done. But there are a few things to watch for: discolored water, reduced water pressure, or visible corrosion on exposed fittings in your basement or crawl space.
If you see any of those signs, you’re already in the danger zone. Kitec doesn’t fail gradually—it fails suddenly. One day the pipes are fine, the next day you’ve got water pouring through your ceiling. That’s why waiting for symptoms isn’t a strategy. The failure rate is high enough that it’s not a question of if, it’s a question of when.
If your home was built between 1995 and 2007 in Walnut Grove, CA, and you haven’t had the plumbing inspected, you should assume Kitec is in there until proven otherwise. We can assess your system and tell you exactly what you’re dealing with. No charge for the inspection—it’s part of the estimate process.
Because we show up on time, we do the work right, and we don’t surprise you with hidden fees. We’ve replaced Kitec in dozens of homes across Walnut Grove and Sacramento County, and we know how to handle the job without turning your home into a disaster zone.
We’re licensed, insured, and local. We’re not a national chain that sends out whoever’s available. You’re working with a team that knows the area, understands the housing stock, and has a reputation to protect. Our 4.7-star Google rating comes from customers who appreciate that we’re transparent, professional, and reliable.
We also offer 24/7 emergency service, so if your Kitec does fail before you get it replaced, we’re available to respond fast. But the better option is to replace it before that happens. We’ll give you a fair estimate, schedule the work around your life, and make sure the job is done right the first time. That’s how we’ve built our reputation in Walnut Grove, CA—one satisfied customer at a time.
Local Resources
Other Services we provide in Walnut Grove
