Hear from Our Customers
If your Alta home was built between 1995 and 2007, there’s a real chance you have Kitec plumbing. Those distinctive orange and blue pipes aren’t just outdated—they’re defective by design, and every single system will eventually fail.
The brass fittings break down when exposed to hot water. The pipes themselves can’t handle normal water heater temperatures. You’re not looking at a small leak when they go—you’re looking at burst pipes, flooding, and thousands in water damage.
Replacing Kitec plumbing in Alta, CA means you stop waiting for disaster. Your insurance company stops questioning your coverage. Your home value stays intact. And you get modern copper or PEX piping that actually works the way plumbing should—reliably, quietly, without the constant threat of failure hanging over your head.
We’ve served El Dorado County since 2001. We’re a fully licensed California contractor (License #916322) with comprehensive insurance, and we’ve built a 4.7-star Google rating by showing up when we say we will and charging exactly what we quote.
Alta’s mix of older homes and newer construction means we see everything—from properties with original plumbing that’s held up surprisingly well to newer builds where installation shortcuts are causing problems decades early. Kitec falls into its own category. It doesn’t matter how well it was installed or how carefully you’ve maintained your home. The materials themselves are the problem.
We don’t oversell. If you call us out and we find something that can wait, we’ll tell you. But with Kitec pipe replacement in Alta, CA, waiting just means you’re paying for the replacement anyway—plus the emergency repairs, the water damage, and the headache of dealing with it all at the worst possible time.
We start with a complete evaluation of your plumbing system. Kitec isn’t always obvious—it can be hidden in walls, ceilings, and crawl spaces. We identify every section that needs to go, not just the visible runs, because partial replacement leaves you vulnerable to the same failures.
Once we’ve mapped everything out, we give you a written estimate with fixed pricing. No surprises, no upselling once we’re halfway through the job. Most Kitec replacement projects in Alta, CA take two to three days, depending on your home’s size and layout.
During the work, we remove all Kitec components—pipes and fittings—and replace them with either copper or PEX piping. Both options are code-compliant, durable, and proven. We’ll walk you through which makes more sense for your specific situation. The new system gets pressure-tested before we close anything up, and we handle any drywall or access points we needed to open.
You’re left with plumbing that works the way it should, a system that insurance companies don’t flag, and documentation of the work if you ever sell the property.
Ready to get started?
Complete Kitec plumbing replacement in Alta, CA means removing every section of defective piping and every brass fitting that’s prone to failure. We’re not patching problem areas or replacing just the visible sections. Partial fixes don’t solve the underlying issue—you’re still living with a system that’s designed to fail.
You get modern copper or PEX piping installed throughout your home, meeting current California building codes. The new system handles normal water pressure and temperature without breaking down. It doesn’t corrode from the inside out. It won’t burst without warning.
Alta homes often have unique challenges—older properties with limited access, newer builds with complex layouts, mature landscaping that complicates exterior work. We’ve handled all of it. Our crews know how to work efficiently without tearing your home apart, and we’re available 24/7 if something fails before we can get the replacement scheduled.
The work comes with documentation showing what was replaced, what materials were used, and proof that everything meets code. That matters when you’re dealing with insurance companies or selling your property down the road.
Most complete Kitec plumbing replacement projects in Alta, CA run between $5,000 and $15,000. That’s a wide range because homes vary—square footage, number of bathrooms, how accessible your plumbing is, and whether we’re working with a single-story house or a multi-level property all affect the final cost.
Here’s what matters more than the range: you’re getting a fixed price before we start. We evaluate your specific system, map out what needs to be replaced, and give you a written estimate. That number doesn’t change once we’re into the work unless you ask us to do something additional.
The class action settlement that helped some homeowners cover Kitec replacement has closed. You’re paying for this out of pocket. But compare that cost to emergency repairs, water damage restoration, increased insurance premiums, and the hit your property value takes when buyers discover Kitec during inspection. The math makes sense.
Most Kitec replacement projects in Alta, CA take two to three days from start to finish. That’s for a complete whole-house repipe, not a partial fix. Larger homes or properties with limited access to plumbing runs might take an extra day or two.
You’ll have water shut off during active work hours, but we restore service at the end of each day so you’re not going without water overnight. We work efficiently—our crews specialize in repiping, so they’re not learning on your job.
The timeline includes removing all Kitec components, installing new copper or PEX piping, pressure testing the system, and handling any drywall or access points we needed to open. We don’t leave until everything’s working properly and you’re confident in the new system. Some companies stretch these jobs out over a week or more. We don’t see the point in dragging it out when we can do it right in a fraction of the time.
Most insurance policies won’t cover Kitec replacement as a preventive measure. They see it as a maintenance issue or a known defect that’s your responsibility to address. Some insurers are refusing to cover homes with Kitec at all, while others are charging significantly higher premiums or adding exclusions for water damage caused by plumbing failures.
If your Kitec system fails and causes water damage, your insurance might cover the damage itself—but not always, and not without a fight. They’re increasingly denying claims when they can prove you knew about the Kitec and didn’t replace it.
The smarter approach is replacing the system before it fails. You avoid the damage, the claim, the potential coverage issues, and the risk of being dropped by your insurer. Some homeowners in Alta, CA have financed the replacement through home equity lines or personal loans rather than gambling on whether insurance will cover a future failure. The monthly payment on financing is often less than the premium increase you’d face by keeping Kitec in place.
You can replace just the brass fittings, but you’re only addressing half the problem. The fittings fail through dezincification when exposed to hot water—that’s well documented. But the orange Kitec pipes themselves can only handle 82°C, which is lower than typical water heater operating temperatures. The pipes are failing too, just sometimes more slowly than the fittings.
Partial Kitec replacement in Alta, CA leaves you with a mixed system. You’ve spent money on the work, you still have defective materials in your walls, and you haven’t solved the insurance or property value issues. Buyers and insurers don’t care that you replaced some of it—they care that Kitec is still present.
The other problem with partial replacement is access. Once we’re opening walls and ceilings to get to the fittings, we’re already doing most of the work required for complete replacement. You’re paying for labor and disruption either way. Finishing the job properly the first time costs less than doing it twice, and it actually solves the problem instead of just delaying the inevitable.
Reduced water pressure is often the first sign. As the brass fittings corrode internally, they restrict flow. You might notice it most in your shower or at fixtures farthest from the water heater.
Discolored water—especially a brown or rust-colored tint—indicates corrosion inside the system. Small leaks at connection points are another warning sign. The fittings are breaking down, and a small drip today can become a burst pipe tomorrow.
But here’s the problem with waiting for warning signs: Kitec failures often happen without any advance notice. The system seems fine one day, and the next day you have a burst pipe flooding your home. The defect is universal—every Kitec system will eventually fail. The question isn’t whether yours will give you warning signs. The question is whether you want to wait and find out, or handle the Kitec replacement in Alta, CA on your timeline instead of during an emergency at 2 AM when everything costs more and the damage is already done.
Yes, if you want to avoid losing money on the sale. Kitec shows up during home inspections, and buyers either walk away or demand a significant price reduction to cover replacement costs—usually more than the actual replacement would cost you.
Real estate agents in Alta know that Kitec is a red flag. It complicates financing because some lenders won’t approve mortgages on homes with known defective plumbing. It scares buyers who don’t want to inherit someone else’s problem. And it gives buyers massive negotiating leverage because you’re required to disclose it.
Replace the Kitec pipes in Alta, CA before listing, and you eliminate the issue entirely. You can market the home with updated plumbing, provide documentation of the work, and avoid the price reductions that come with selling a property that has a known defect. The replacement cost is usually less than the hit you’d take on sale price, and the home sells faster without the Kitec complication hanging over every offer.
Local Resources
Other Services we provide in Alta
