Home » Services » Kitec Replacement » Kitec Replacement Diamond Springs, CA
Hear from Our Customers
Your insurance company already knows what Kitec means. Many won’t renew your policy until it’s gone. Some won’t cover water damage if Kitec caused it.
That’s because Kitec doesn’t just leak. It bursts. The fittings corrode from the inside, the pipes weaken, and when they go, they flood rooms fast. You’re not dealing with a slow drip you can catch with a bucket.
Replacing Kitec plumbing in Diamond Springs, CA means you can actually insure your home again. It means you can sell without scaring off buyers. It means you stop wondering if today’s the day your walls turn into waterfalls. Complete kitec pipe replacement eliminates the risk entirely, and that’s the only real fix.
We’ve spent over 24 years working in Diamond Springs and the surrounding El Dorado County area. We know the homes here, the building codes, and what it takes to replace kitec pipes without tearing your house apart more than necessary.
We’re not a franchise. We’re not rotating through techs who’ve never seen Kitec before. We show up, assess the system, give you a fixed price, and get it done right.
You’ll get the same crew from start to finish. We handle the plumbing, the drywall, and the paint. You get one point of contact and one bill, not three contractors playing phone tag while your walls are open.
First, we inspect your system to confirm it’s Kitec and map out where it runs. Kitec is usually orange and blue, but not always. We check the fittings, the manifolds, and the water heater connections.
Once we know the scope, we give you a fixed price. No surprises later. Then we shut off your water, drain the lines, and start removing every inch of Kitec from your home—hot and cold.
We replace it with PEX or copper, depending on your preference and budget. Both are code-compliant and built to last. After the new pipes are in and tested, we patch and paint the drywall so it looks like we were never there. You’re back to normal water pressure and zero Kitec liability.
Ready to get started?
This isn’t a patch job. We remove every section of Kitec plumbing in your home and replace it with materials that meet current California building standards. That includes all supply lines, fittings, manifolds, and connections to fixtures and appliances.
In Diamond Springs, CA, most homes built between 1995 and 2007 are at risk. El Dorado County saw plenty of Kitec installs during that window, and most of those systems are now past their 10-year average lifespan. If your home falls in that range, you’re on borrowed time.
We also handle the finish work. That means drywall repair, texture matching, and paint. You’re not left staring at holes in your walls or calling another contractor to close things up. Our crew does it all, and we don’t leave until it’s done right.
Kitec pipes are usually marked with “Kitec” or “XPA” on the pipe itself. The hot water lines are typically orange, and the cold water lines are blue, though sometimes both are gray or white.
Check near your water heater, under sinks, or in your crawl space or attic where supply lines run. The fittings are brass and often stamped with “Kitec” as well. If your home was built or repiped between 1995 and 2007 in Diamond Springs, there’s a strong chance you have it.
If you’re not sure, we can come out and confirm. It takes about 20 minutes to inspect the system and tell you exactly what you’re dealing with.
Most insurance companies won’t pay to replace Kitec as a preventive measure. They see it as a maintenance issue, not a covered loss.
However, if your Kitec has already failed and caused water damage, your policy might cover the damage itself—but not always. Some insurers specifically exclude Kitec-related claims, especially if they knew it was in your home and you didn’t replace it.
What we see more often is insurers refusing to renew policies until the Kitec is gone. If you’re trying to get new coverage or refinance, expect the underwriter to ask about it. Replacing it now keeps your insurability intact and protects your home’s value.
For most homes in the Diamond Springs area, a full Kitec replacement runs between $5,000 and $15,000, depending on the size of your home and how accessible the pipes are.
Single-story homes with a crawl space are usually on the lower end. Two-story homes with pipes running through walls and ceilings cost more because there’s more labor involved in accessing and replacing everything.
We give you a fixed price upfront after we assess your system. That price includes all plumbing, materials, drywall repair, and paint. No change orders. No surprise fees. You’ll know exactly what it costs before we start.
You could, but it won’t solve the problem. The fittings fail first, but the pipes themselves degrade over time too. The inner lining breaks down, especially on hot water lines, and eventually those pipes will burst.
Replacing just the fittings buys you a little time, but it’s not a permanent fix. You’ll still have Kitec in your walls, and your insurance company will still see it as a liability.
A full kitec pipe replacement is the only way to eliminate the risk completely. Anything short of that is just kicking the problem down the road, and when it fails, you’re looking at water damage on top of the replacement cost.
Most Kitec replacements in Diamond Springs take between two and five days, depending on the size of your home and how the pipes are routed.
We work efficiently, but we’re not cutting corners. We need time to remove all the old Kitec, install the new system, pressure test everything, and then repair and paint the drywall.
You’ll have water shut off during the work, but we coordinate with you to minimize disruption. If you need us to work in stages so you’re not without water for days straight, we can usually make that happen.
Call us immediately at our 24/7 emergency line. We’ll get someone out to shut off the water, assess the damage, and start mitigation.
Kitec failures are severe. These pipes don’t drip—they burst wide open and flood fast. You’re looking at soaked drywall, damaged flooring, and potentially ruined belongings if it’s not caught quickly.
Once the emergency is handled, we’ll work with you on full replacement so it doesn’t happen again. At that point, your insurance might cover some of the damage, but replacing the rest of the Kitec is on you. That’s why replacing kitec plumbing before it fails saves you thousands in water damage and restoration costs.
Other Services we provide in Diamond Springs