Hear from Our Customers
Your insurance company stops questioning your coverage. Buyers don’t walk away during inspections. You stop wondering if today’s the day your pipes give out.
Replacing Kitec plumbing in River, CA means swapping out a system with a 100% failure rate for copper or PEX that’s built to last decades. The orange and blue pipes installed between 1995 and 2007 weren’t designed to handle the heat coming from your water heater. They degrade from the inside out, and when they fail, it’s not a slow drip—it’s a flood.
Most homeowners in River, CA who still have Kitec are living on borrowed time. The systems were supposed to last 25 years. Most started failing around the 10-year mark. If your home was built or repiped during that window, you’re already past the danger zone.
Professional Kitec replacement gives you a plumbing system you can trust. You’ll sleep better knowing your pipes aren’t quietly corroding. You’ll have an easier time selling your home when the time comes. And you won’t be scrambling to find emergency help at 2 a.m. when a pipe bursts in your wall.
We’ve been handling residential and commercial plumbing in El Dorado County since 2009. We’re licensed (License #916322), insured, and we’ve built a 4.7-star Google rating by doing what we say we’ll do.
River, CA sits in an area where thousands of homes were built during the Kitec installation years. We’ve repiped plenty of them. We know what it takes to replace Kitec plumbing without tearing your house apart, and we price the work fairly—often coming in under the original estimate.
You’ll get transparent pricing before we start, professional installation while we’re there, and a system that’s warrantied when we’re done. We also offer 24/7 emergency service if you’re already dealing with a failure and need help now.
First, we assess your home to determine how much Kitec is installed and where it’s running. Some homes only have it on the hot water side. Others have it throughout. That dictates scope and cost.
Next, we walk you through your replacement options. Copper is the traditional choice—durable, long-lasting, and backed by 50+ year warranties. PEX is flexible, faster to install, and handles freezing temperatures better. Both are massive upgrades over Kitec. We’ll explain the pros and cons so you can make the call.
Once you approve the estimate, we schedule the work. Most Kitec replacement jobs in River, CA take a few days, depending on the size of your home. You can stay in the house while we work. We’ll shut off water only when necessary and keep disruption to a minimum.
We pull the necessary permits, remove the old Kitec piping, and install your new system to code. After inspection and approval, you’re done. No more orange and blue pipes. No more wondering when they’ll fail.
Ready to get started?
A complete Kitec pipe replacement in River, CA means removing every section of Kitec from your home and replacing it with copper or PEX. That includes hot and cold water lines, supply lines to fixtures, and any fittings or connections tied to the old system.
We handle the permits and inspections required by local code. We coordinate with inspectors to make sure everything passes the first time. You don’t have to deal with the county—we do.
River, CA is part of the Sacramento metro area, where home values have climbed steadily over the past decade. Kitec is one of the few things that can tank a sale or trigger a low appraisal. Replacing it protects your investment and keeps your home competitive when you’re ready to sell.
We also help homeowners dealing with insurance issues. Some carriers in California have started refusing coverage for homes with Kitec, or they’re charging higher premiums. Replacing the system removes that obstacle and can even lower your rates. If you’re refinancing or selling, having Kitec replaced shows buyers and lenders that your home is move-in ready.
Most Kitec replacement projects in River, CA run between $5,000 and $15,000, depending on the size of your home and how much piping needs to be replaced. A smaller home with Kitec only on the hot water side will cost less than a larger home with a full system replacement.
The price includes labor, materials (copper or PEX), permits, and inspections. Copper tends to cost more upfront but comes with longer warranties. PEX is usually faster to install and can save on labor costs.
We provide a detailed estimate before starting any work, and we’re known for coming in at or below the quoted price. The cost of replacing Kitec plumbing now is a fraction of what you’d pay to repair water damage from a burst pipe—most Kitec failures result in damage that runs into the tens of thousands.
Kitec pipes are usually bright orange (for hot water) and bright blue (for cold water). Check your water heater, under sinks, in your crawl space, or in the attic. If you see those colors, you likely have Kitec.
The system was also sold under other brand names like PlumbBetter, IPEX AQUA, WarmRite, Kitec XPA, and AmbioComfort. If any of those names appear on your pipes or fittings, it’s the same problematic material.
Homes built or repiped between 1995 and 2007 are the most likely to have Kitec installed. If you’re not sure, we can come out and inspect your plumbing system. It only takes a few minutes to confirm, and it’s worth knowing so you can plan accordingly.
Replacing just the fittings might stop an immediate leak, but it doesn’t solve the bigger problem. The pipes themselves are failing, not just the brass fittings. The plastic degrades over time due to heat exposure and chemical reactions with your water.
Even if you replace every fitting, the pipe will eventually crack or burst on its own. You’re buying time, not a solution. And because Kitec is no longer manufactured, any replacement parts you find are likely old stock that’s been sitting in a warehouse for years.
Most homeowners who try the piecemeal approach end up paying for multiple repairs before finally repiping the whole house. At that point, they’ve spent more than if they’d just replaced the system upfront. If you have Kitec, the only reliable fix is full replacement with copper or PEX.
Yes. Kitec is a red flag for buyers, inspectors, and lenders. Most buyers either walk away when they find out a home has Kitec, or they ask for a significant price reduction to cover the cost of replacement.
Appraisers and underwriters also take Kitec into account. If you’re selling or refinancing, having Kitec can delay or kill the deal. Replacing it before listing your home removes that obstacle and makes your property more attractive to a wider pool of buyers.
In River, CA and the surrounding Sacramento area, home sales move fast when the property is in good condition. Kitec replacement is one of the smartest investments you can make if you’re planning to sell in the next few years. It protects your equity and speeds up the transaction.
Most residential Kitec plumbing replacement jobs take between two and five days, depending on the size of your home and the extent of the piping. A smaller home with limited Kitec might be done in two days. A larger home with a full system replacement could take closer to a week.
You can stay in your home during the work. We’ll need to shut off your water at certain points, but we coordinate those shutdowns to minimize disruption. Most of the work happens behind walls or in crawl spaces, so your daily routine won’t be completely upended.
After installation, we schedule the required inspections with the county. Once everything passes, you’re good to go. The timeline also depends on permit approval and inspector availability, but we handle all of that coordination so you don’t have to.
Most homeowners insurance policies don’t cover the cost of replacing Kitec as a preventive measure. Insurance typically only pays for damage caused by a sudden failure, like a burst pipe. Even then, they may not cover the full cost of repairs if they determine the failure was due to a known defect.
Some insurance companies in California have started dropping coverage for homes with Kitec or charging higher premiums. If you’re having trouble finding affordable coverage, replacing the system can solve that problem and potentially lower your rates.
There was a class action settlement in 2011 that provided some compensation to homeowners, but the deadline to file a claim passed in 2020. At this point, replacement costs fall on the homeowner. The good news is that replacing Kitec now prevents the much larger expense of dealing with flooding, water damage, mold remediation, and temporary housing while your home is being repaired.
Local Resources
Other Services we provide in River
