Hear from Our Customers
Your water pressure comes back. No more weak flow from corroded fittings or zinc buildup choking your lines.
Insurance companies stop flagging your policy. Kitec is a known liability, and many carriers either raise premiums or refuse coverage outright. Replacing it removes that red flag entirely.
Your home becomes sellable again. Buyers and their inspectors know what Kitec means, and most won’t touch a property with it still installed. A complete Kitec repipe in Lemon Hill, CA gives you a clean inspection report and removes a major negotiation obstacle.
You stop waiting for disaster. Kitec doesn’t leak slowly—it bursts. Usually without warning. Repiping now means you’re not gambling with thousands in water damage, ruined floors, or mold remediation down the line.
We’ve been handling residential and commercial Kitec repiping in Lemon Hill, CA for over a decade. We know the homes in this area—the layouts, the pipe runs, the access challenges.
Lemon Hill has a mix of older construction and homes built during the exact window when Kitec was installed everywhere. If your house went up between 1995 and 2007, there’s a real chance you’ve got it. We’ve pulled it out of dozens of properties just like yours.
We show up on time, quote the job upfront, and finish most repipes in one to two days. No surprises on the bill. No dragging the work out for a week. Just transparent pricing and professional Kitec repiping services that actually get done.
We start with an inspection to confirm you have Kitec and map out where it runs. Not every home has it in the same places, so we check hot and cold lines, locate shutoffs, and plan access points.
Next, we shut off your water and remove the old Kitec piping. This includes the brass fittings that corrode and fail first. We pull everything out—no partial fixes or “wait and see” patches.
Then we install new piping using either PEX or copper, depending on your budget and preferences. PEX is faster and costs less. Copper lasts longer and handles high heat better. Both are light-years ahead of Kitec.
We test the system, restore water pressure, and patch any drywall or access holes we opened. Most residential Kitec repipe jobs in Lemon Hill, CA are done in one to two days, start to finish. You’re back to normal fast, with a system that won’t fail on you.
Ready to get started?
You get complete removal of all Kitec pipes and fittings—hot, cold, and any branch lines running to fixtures. We don’t leave sections behind to fail later.
We install new piping throughout your home, restore full water pressure, and test every connection for leaks. All work is done to current California plumbing codes, so you’re not just fixing a problem—you’re upgrading to modern standards.
In Lemon Hill, CA, hard water is common and accelerates the corrosion that makes Kitec fail even faster. The new materials we install resist mineral buildup and handle the local water chemistry without degrading. That means fewer clogs, better flow, and a system that actually lasts.
We also handle the finish work—patching walls, repainting access points, and cleaning up the job site. You’re not left with a mess or a list of things to fix yourself. The job is done when we leave, and it comes with a warranty that covers the materials and labor.
Check the visible pipes near your water heater, under sinks, or in your basement or crawl space. Kitec pipes are usually orange or blue, though some are gray. The fittings are brass and often stamped with “Kitec” or “KTC.”
If your home was built or had plumbing work done between 1995 and 2007, the odds are higher. That’s when Kitec was widely installed across California, including in Lemon Hill, CA and surrounding areas.
You can also look at your home inspection report if you bought recently. Most inspectors flag Kitec when they see it. If you’re still unsure, we can come out and confirm it for you during a quick inspection.
Most residential repipes run between $5,000 and $15,000, depending on the size of your home, the materials you choose, and how accessible your plumbing is. PEX is cheaper and faster to install. Copper costs more but lasts longer and handles high temperatures better.
Homes with multiple stories, slab foundations, or limited crawl space access cost more because the work takes longer. We give you an exact price before we start, so there’s no guessing or surprise charges when the job is done.
Repiping isn’t cheap, but it’s a fraction of what you’ll pay if a Kitec pipe bursts and floods your home. Water damage, mold remediation, and replacing floors or drywall can easily hit $20,000 or more. A professional Kitec repipe in Lemon Hill, CA is the cheaper option when you factor in the risk.
Most homes are done in one to two days. Smaller homes with easy access can be finished in a single day. Larger homes or properties with complex layouts might take two full days, but rarely longer.
We work efficiently and don’t drag the job out. You’ll be without water during the work, but we coordinate with you to minimize disruption. Most of our clients are back to normal by the next evening.
The speed depends on how much Kitec you have and where it’s located. If your pipes run through finished walls or tight spaces, access takes longer. But even in those cases, we’re talking days—not weeks. Kitec repiping services in Lemon Hill, CA don’t have to take over your life.
Usually not. Most insurance policies don’t cover the cost of repiping because it’s considered a maintenance issue, not sudden damage. They’ll cover the water damage if a pipe bursts, but not the cost to replace the system before it fails.
That said, some insurers offer discounts or incentives if you replace Kitec proactively. It’s worth asking your agent. And if you’re trying to sell your home, buyers will expect you to handle it—not them.
The bigger issue is that many insurance companies in California are reluctant to cover homes with Kitec at all. Some charge higher premiums. Others refuse coverage outright. Replacing it removes that problem entirely and can actually lower your insurance costs long-term.
You can, but it’s a bad idea. Kitec fails because the brass fittings corrode from the inside out. If one section is leaking, the rest of the system is degrading at the same rate. You’re just buying time—and not much of it.
Patching one leak might cost $500 to $1,000. But when the next section fails a few months later, you’re paying again. And again. Most homeowners who try the patchwork approach end up spending more than a full repipe would have cost in the first place.
A complete Kitec repipe in Lemon Hill, CA solves the problem once. You’re not waiting for the next failure or dealing with emergency calls every few months. It’s more upfront, but it’s the only fix that actually works.
We use either PEX or copper, depending on what you need and what fits your budget. PEX is flexible, installs faster, and costs less. It’s approved for residential use in California and works well in most homes. It doesn’t corrode, resists mineral buildup, and handles pressure changes without cracking.
Copper is the traditional choice. It lasts decades, handles high heat better than PEX, and some homeowners just prefer it. It costs more and takes longer to install, but it’s a solid long-term option.
Both are massive upgrades over Kitec. Neither will corrode from the inside, burst without warning, or fail because of water chemistry. We’ll walk you through the pros and cons of each during your consultation so you can make the call that makes sense for your home and budget.
Local Resources
Other Services we provide in Lemon Hill
