Hear from Our Customers
Kitec pipes don’t just leak. They burst. The brass fittings break down from the inside out, and when they fail, you’re looking at flooding, not a slow drip under the sink.
The question isn’t if your Kitec system will fail. It’s when. Industry experts predict 100% failure rates because the defects are built into every fitting. Homes with Kitec installed between 1995 and 2007 across El Dorado County are on borrowed time.
You can’t prevent it with maintenance. You can’t slow it down. The only real solution is complete Kitec pipe replacement before the system collapses. That means ripping out the old piping and installing something that won’t flood your house in five years.
Waiting costs more. Emergency water damage repairs, insurance claims that get denied, lost property value when you try to sell. Kitec plumbing services in Kyburz, CA aren’t optional if you want to avoid that mess.
We’ve been handling emergency plumbing in Kyburz, CA and throughout El Dorado County since day one. We’re licensed, insured, and we show up when we say we will.
Kitec leak repair isn’t something you want to trust to someone who’s never dealt with it before. We’ve seen what happens when these systems fail, and we know how to replace them the right way. Our customers in Kyburz and surrounding areas call us because we answer the phone at 2 a.m. and we don’t disappear after the estimate.
You’ll get transparent pricing before we start. No surprises, no upselling. Just straight answers about what needs to happen and what it’s going to cost.
First, we come out and inspect your system. We’ll confirm whether you actually have Kitec piping and check how much of your home is affected. Most homes have it running through the entire hot water system, but we’ll map out exactly what needs replacing.
Then we give you a clear estimate. You’ll know the full scope of the work, the timeline, and the cost before we touch anything. We’re not interested in surprising you with add-ons halfway through the job.
Once you approve, we schedule the replacement. Depending on your home’s size and how accessible the pipes are, a full repipe can take anywhere from a few days to a week. We’ll shut off water only when necessary and keep disruption as minimal as possible.
After installation, we test everything. You’ll have new piping that meets current code, and you won’t have to worry about your insurance company dropping you or a buyer walking away because of Kitec.
Ready to get started?
We remove all Kitec piping and fittings from your home. That includes the hot water lines where most failures happen, the cold water supply, and any connections to your water heater or fixtures.
You’ll get new piping installed to current California plumbing code. We use materials that won’t degrade over time or cause the same problems Kitec did. Everything gets pressure tested before we close up walls or finish the job.
In Kyburz, CA, homes are often older with unique layouts. We’ve worked in properties with tight crawl spaces, limited access, and plumbing that’s been patched together over decades. We know how to navigate that without tearing apart your entire house.
You’ll also get documentation for your insurance company and future buyers. When you go to sell, you can prove the Kitec is gone and the system is up to code. That alone can save you thousands in lost offers or buyer credits.
Most full Kitec replacements in Kyburz, CA run between $5,000 and $15,000. The final cost depends on your home’s size, how many bathrooms you have, and how easy it is to access the existing pipes.
A smaller two-bedroom, one-bath home with accessible plumbing might land closer to $5,000. Larger homes with multiple bathrooms, longer pipe runs, or difficult access can push toward $15,000 or more. We’ll give you an exact number after we inspect your property.
That might sound steep, but compare it to the alternative. Emergency water damage repairs after a burst pipe can easily hit $10,000 to $20,000. Add in insurance deductibles, lost belongings, and the headache of dealing with claims, and replacement starts looking like the cheaper option.
Most insurance companies won’t cover the cost of replacing Kitec piping. They see it as a maintenance issue, not sudden damage. But if your Kitec pipes burst and cause water damage, they might cover the damage itself, depending on your policy.
Here’s the catch. Some insurers in California won’t even cover homes with Kitec anymore. They’ll either deny you coverage outright or charge you significantly higher premiums because of the risk. If you’re trying to get a new policy or renew, Kitec can become a dealbreaker.
The best move is to replace the system before it fails. That way, you avoid the insurance fight entirely and you’re not stuck scrambling to find coverage or paying through the roof for it.
You can patch a leak temporarily, but it’s not a real fix. Kitec failures aren’t isolated. The same defect that caused one fitting to fail exists in every other fitting in your system. Fixing one leak just buys you time until the next one bursts.
We’ve seen homeowners spend thousands on multiple repairs over a few years, only to end up replacing the whole system anyway. By that point, they’ve paid more in patchwork than a full replacement would have cost upfront.
The only permanent solution is complete removal. Anything short of that is just delaying the inevitable and probably costing you more in the long run.
Kitec pipes are usually orange or blue. The orange pipes carry hot water, and the blue ones carry cold. You’ll also see brass fittings with “Kitec” stamped on them, though not every fitting has visible markings.
Check your water heater, under sinks, in your crawl space, or anywhere you can see exposed plumbing. If you spot those colors or any fittings that look like brass with that branding, you’ve got Kitec.
Homes built or renovated in El Dorado County between 1995 and 2007 are the most likely candidates. If your home falls in that window and you’re not sure what’s behind the walls, call us. We’ll inspect the system and tell you exactly what you’re dealing with.
You’ll have flooding. Kitec doesn’t fail gently. When the fittings give out, the pipes burst wide open, especially on the hot water side. That means gallons of water pouring into your walls, floors, or ceilings until you shut off the main supply.
Water damage spreads fast. Drywall soaks through, flooring warps, and anything stored nearby gets ruined. If it happens while you’re away from home, the damage multiplies. You’re looking at major repairs, mold remediation, and weeks of contractors tearing apart your house.
If you know you have Kitec and you’re putting off replacement, you’re gambling. The longer you wait, the higher the odds that you’ll be dealing with an emergency instead of a planned project. We offer 24/7 emergency service in Kyburz, CA, but it’s a lot easier to replace the system on your schedule than ours.
Most full replacements take three to seven days, depending on the size of your home and how accessible the plumbing is. Smaller homes with straightforward layouts can be done faster. Larger properties or homes with plumbing buried in walls or tight crawl spaces take longer.
We’ll give you a timeline upfront so you know what to expect. We work as efficiently as possible without cutting corners. You’ll have water shut off only during active work, and we’ll make sure you’re not left without working plumbing overnight.
Once the job’s done, you’re set. No more worrying about Kitec failures, no more insurance headaches, and no more wondering when the next leak is coming.
Local Resources
Other Services we provide in Kyburz
