Hear from Our Customers
Here’s what most Lincoln homeowners don’t realize until it’s too late: Kitec pipes don’t just develop slow leaks. They burst. And when they do, you’re looking at thousands in water damage, potential mold remediation, and a scramble to find coverage—only to discover your insurance company won’t cover it.
That’s the reality of Kitec plumbing problems in Lincoln, CA. The brass fittings corrode from the inside out. Water temperatures above 180°F or pressure over 80 PSI accelerate the breakdown. Eventually, the fitting fails completely, and you’ve got water pouring into your walls, ceilings, or floors.
Beyond the immediate damage, there’s the insurance issue. Many carriers in California are raising premiums or outright refusing coverage for homes with known Kitec installations. If you’re trying to sell, buyers educated on the risks will either walk away or demand a significant price reduction. You’re stuck between paying for replacement now or losing value—and peace of mind—later.
Kitec leak repair in Lincoln, CA isn’t about patching a problem. It’s about removing a ticking time bomb from your home. When you replace Kitec piping with modern materials like PEX or copper, you restore your home’s insurability, eliminate the risk of catastrophic failure, and protect the investment you’ve worked hard to build.
We’ve been serving Lincoln and El Dorado County for over 25 years. We’re not a franchise or a call center routing you to the lowest bidder. We’re a locally licensed contractor—California License #916322—with a 4.7-star Google rating based on 93 reviews from real customers who needed fast, reliable work.
Lincoln’s housing boom between 2000 and 2010 means a lot of homes here were built right in the middle of the Kitec installation window. We’ve seen the damage firsthand. We know which neighborhoods are most affected, and we know how to get the job done without tearing your house apart.
When you call us for Kitec pipe repair in Lincoln, CA, you’re getting transparent pricing, licensed work, and a team that shows up on time. No surprises. No upselling. Just the work that needs to be done, done right.
First, we inspect your plumbing system to confirm whether you have Kitec and assess the extent of the installation. Kitec piping is usually orange or blue, with brass fittings stamped “Kitec” or “KTC.” If it’s present, we’ll map out where it runs—hot water lines, cold water lines, or both.
Next, we give you a clear estimate. For most Lincoln homes, full repiping runs between $5,000 and $30,000 depending on square footage, the number of bathrooms, and whether we’re replacing just the water heater lines or the entire system. We’ll explain what’s included: new piping, fittings, labor, and any drywall or paint touch-ups needed to close things back up.
The actual work typically takes two to three days. We shut off water to the affected areas, remove the old Kitec piping, and install new PEX or copper lines. Water is restored each evening so you’re not left without service overnight. Once the new system is in, we pressure test everything, patch walls, and walk you through what we did.
You’re left with a reliable, code-compliant plumbing system that won’t put your home or your insurance coverage at risk. And if something does come up down the road, we stand behind our work with a written warranty.
Ready to get started?
Kitec failures don’t happen on a schedule. A fitting can burst at 2 a.m. on a Sunday, and by the time you wake up, you’ve got water pooling in your hallway. That’s why we offer 24/7 emergency service for Kitec plumbing problems in Lincoln, CA.
When you call, you’re talking to someone who can dispatch a licensed plumber to your home fast. We’ll shut off the water, assess the damage, and either make a temporary repair to stop the flooding or begin full replacement if that’s what’s needed. Speed matters here—every minute counts when water is actively damaging your home.
Lincoln’s median home value sits around $544,000. You’ve got a significant investment to protect, and most insurance policies won’t cover damage from a known defect like Kitec once you’re aware of it. If you’ve already had one leak, the clock is ticking on the rest of your system. Waiting isn’t a strategy—it’s a gamble.
Our service includes full diagnostics, upfront pricing, and options for both immediate repair and long-term replacement. We’re not here to scare you into unnecessary work, but we will tell you the truth about what’s at risk and what your options are. You make the call. We just make sure you have the information to make it confidently.
Check your water heater, under sinks, and in your attic or crawl space for orange or blue flexible piping with brass fittings. The fittings are usually stamped with “Kitec,” “KTC,” or the manufacturer name “IPEX.”
If your home was built or renovated between 1995 and 2007, there’s a higher likelihood Kitec was used. Lincoln saw significant residential growth during that period, and Kitec was a popular choice for builders because it was inexpensive and easy to install.
If you’re not sure, call us. We can do a quick inspection and tell you definitively whether you have Kitec and where it’s installed. There’s no charge for the assessment, and you’ll know exactly what you’re dealing with.
Full Kitec replacement in Lincoln typically runs between $5,000 and $30,000 depending on your home’s size, the number of bathrooms, and how much of the system needs replacing. Smaller homes with limited Kitec installations fall on the lower end. Larger homes with Kitec throughout the hot and cold water lines cost more.
That price includes removing the old piping, installing new PEX or copper lines, pressure testing, and patching drywall where we need access. Some companies quote low and add costs later. We don’t. You’ll get a written estimate before we start, and the final bill reflects what we agreed on.
If you’re dealing with an active leak and need emergency Kitec leak repair in Lincoln, CA, we can often make a temporary fix to stop the water and buy you time to plan for full replacement. But temporary repairs aren’t a long-term solution—Kitec fittings are no longer manufactured, so patching one leak doesn’t prevent the next one.
Most homeowners insurance policies won’t cover the cost of replacing Kitec piping itself—that’s considered a maintenance issue. However, if a Kitec pipe bursts and causes sudden water damage, your policy may cover the resulting damage to your floors, walls, and belongings.
The catch is this: once you’re aware you have Kitec, some insurers consider any future damage a “known risk” and may deny claims. Worse, some carriers in California are now refusing to renew policies or charging higher premiums for homes with Kitec plumbing still in place.
If you’re buying or selling a home in Lincoln, this becomes a disclosure issue. California law requires sellers to disclose known defects, and Kitec qualifies. Buyers can request replacement as a condition of sale, or they’ll factor the cost into their offer. Either way, it affects your home’s value and marketability. Replacing it proactively removes that obstacle entirely.
Most Kitec pipe repair jobs in Lincoln, CA take two to three days from start to finish. Day one usually involves shutting off water, removing old piping, and starting installation of the new system. Day two is running the new lines, making connections, and pressure testing. Day three covers drywall patching, paint touch-ups, and final inspection.
We restore water service each evening so you’re not without running water overnight. If you have multiple bathrooms or a larger home, it might take an extra day, but we’ll give you a clear timeline upfront.
The process does require access to walls and ceilings where the piping runs. We cut openings as needed, but we keep them as small as possible and patch everything back up before we leave. You’ll have some minor cosmetic work to deal with, but it’s nothing compared to the damage a burst pipe would cause.
You can make a temporary repair to stop an active leak, but it’s not a permanent fix. Kitec fittings are no longer manufactured, and the piping itself isn’t compatible with standard plumbing fittings. That means any repair is a workaround, not a true replacement.
More importantly, if one section of your Kitec system has failed, the rest of it is likely in similar condition. The same corrosion and pressure issues that caused the first leak are affecting every other fitting in your home. Patching one spot doesn’t reset the clock—it just buys you time until the next failure.
For Lincoln homeowners, the smarter move is full replacement. You eliminate the ongoing risk, restore your insurance coverage, and avoid the stress of wondering when the next leak will hit. Emergency Kitec repair in Lincoln, CA is something we do when pipes burst unexpectedly, but we’ll always recommend long-term replacement over repeated short-term fixes.
Both PEX and copper are solid choices for replacing Kitec plumbing in Lincoln, CA. PEX is more affordable, faster to install, and flexible enough to run through tight spaces without as many fittings. It’s also resistant to freezing and corrosion, which makes it a good fit for California homes.
Copper is the traditional option—durable, long-lasting, and preferred by some homeowners for its proven track record. It costs more and takes longer to install because it requires soldering at every joint, but it’s a premium material that adds value.
We’ll walk you through both options and help you decide based on your budget, your home’s layout, and your long-term plans. There’s no wrong choice here—both materials will give you a reliable, code-compliant system that outlasts Kitec by decades.
Local Resources
Other Services we provide in Lincoln
