Hear from Our Customers
Your water pressure improves the moment new pipes go in. That’s what happens when you replace corroding Kitec with smooth copper or PEX—water flows freely again, showers run stronger, and you’re not dealing with weak streams at multiple fixtures.
But the real outcome is what doesn’t happen. No sudden pipe burst while you’re at work. No $15,000 emergency repair bill because a fitting failed in your walls. No mold remediation after water sat unnoticed for days.
Kitec systems were installed in Cameron Park homes between 1995 and 2007, marketed as a cost-effective alternative to copper. The problem is they fail—often without warning—and when they do, the damage spreads fast. Replacing it now means you control the timeline, the cost, and the process. Waiting means the pipe decides for you.
We hold a California C-36 plumbing contractor license, which means we’ve met the state’s requirements for experience, insurance, and bonding. That license also allows us to pull permits, coordinate inspections, and handle the full scope of residential and commercial Kitec repiping in Cameron Park.
We’ve built a 4.7-star reputation across 93 Google reviews by showing up on time, pricing fairly, and doing the work right. Many of our customers mention that the final bill came in lower than the estimate—that’s not an accident. We price based on the actual work, not inflated worst-case scenarios.
Cameron Park’s housing stock includes thousands of homes built during the exact years Kitec was being installed. We’ve worked in this area long enough to know which neighborhoods have it, what the common configurations look like, and how to repipe efficiently without tearing apart your home.
Most Cameron Park homeowners stay in their homes during the entire repiping process. We restore water service every evening, so you can shower, cook, and use your plumbing normally outside of work hours.
The process starts with an inspection to map your existing Kitec system and identify the best replacement approach. We’ll discuss material options—copper offers 50+ years of durability, while PEX is cost-effective and freeze-resistant. Both are significant upgrades over Kitec.
Once we begin, we work methodically through your home, removing old pipes and installing new ones. Most jobs take two to four days depending on square footage and complexity. We handle permits, inspections, and cleanup. You’ll notice the difference in water pressure immediately, and you’ll have documentation of the upgrade for insurance and resale purposes.
After installation, we test the system, walk you through what was done, and provide warranty information for both labor and materials.
Ready to get started?
A complete Kitec repipe in Cameron Park means removing every section of Kitec pipe and fitting from your home—hot and cold water lines, supply lines to fixtures, and any brass fittings that are part of the recalled system.
You’re getting new pipes installed throughout, which typically includes copper or PEX running from your water heater and main supply to every fixture in your home. We reconnect everything—sinks, toilets, showers, appliances—and test for leaks before calling it complete.
Cameron Park homes built in the late 1990s and early 2000s often have Kitec in the walls and ceilings. With a median home value over $640,000 in this area, protecting that investment matters. A documented repipe adds value and removes a known liability that can complicate home sales or insurance coverage.
We also coordinate the permit process with El Dorado County, handle required inspections, and provide you with signed-off documentation. That paperwork proves the work was done to code, which matters for future buyers and insurance claims.
Look for plastic pipes with “Kitec” or “XPA” printed on them, usually in orange or blue. The fittings are brass and often stamped with “KTC” or the Kitec logo.
Check near your water heater, under sinks, and in your attic or crawl space where pipes are visible. Kitec was commonly installed in Cameron Park homes built or remodeled between 1995 and 2007, so if your home falls in that range, there’s a higher chance it’s present.
If you’re not sure, we can inspect your plumbing system and identify whether you have Kitec. That inspection also helps us map out the scope of a repipe if replacement is needed.
Kitec fails because the brass fittings corrode from the inside when exposed to hot water and certain water chemistry conditions. The pipes themselves can also degrade, leading to sudden bursts without warning.
When a Kitec pipe bursts, it can release gallons of water per minute into your walls, ceilings, or floors. Homeowners report repair costs between $10,000 and $20,000 for water damage alone—that’s before you factor in mold remediation, which can add thousands more.
The class action settlement in 2011 totaled $125 million, which tells you how widespread and serious the failures have been. Replacing Kitec before it fails is significantly less expensive and disruptive than dealing with an emergency repair and the damage that comes with it.
Yes. Most of our Cameron Park customers stay home throughout the repiping process. We shut off water during work hours and restore service every evening so you can use your plumbing normally.
The job typically takes two to four days depending on your home’s size and layout. We work efficiently to minimize disruption, and we clean up daily so you’re not living in a construction zone.
If you have specific scheduling needs—like working from home or managing kids’ routines—we can coordinate around that. The goal is to replace your pipes without forcing you to relocate or drastically change your routine.
Copper lasts 50+ years, resists UV damage, and handles high heat without issue. It’s the traditional choice and adds a level of durability that appeals to many homeowners, especially in higher-value homes like those in Cameron Park.
PEX is flexible, freeze-resistant, and typically costs less to install because it requires fewer fittings and less labor. It’s also quieter than copper when water flows through it, which some homeowners prefer.
Both are massive upgrades over Kitec. The right choice depends on your budget, how long you plan to stay in the home, and your preferences around longevity versus cost. We’ll walk you through both options during the inspection so you can make an informed decision.
Cost depends on your home’s square footage, the number of fixtures, and whether you choose copper or PEX. Most single-family homes in Cameron Park fall in a range that we can estimate after a quick inspection.
We price based on the actual scope of work, not inflated worst-case scenarios. Many of our customers mention being surprised when the final bill comes in lower than expected—that’s because we’re transparent about what the job requires and we don’t pad estimates.
Financing options are available if you’d rather spread the cost over time instead of paying upfront. What matters most is that you’re replacing a system with a documented failure rate before it fails on its terms, which would cost significantly more in emergency repairs and water damage.
Most homeowners insurance policies don’t cover the cost of replacing Kitec as a preventive measure. Insurance typically covers sudden damage from a failure, but not the proactive replacement of a known defective system.
However, if your Kitec has already failed and caused water damage, your policy may cover the damage and associated repairs. You’ll need to check your specific policy and speak with your insurance provider to understand your coverage.
Some homeowners were eligible for compensation through the class action settlement that closed in 2020, but that claims period has ended. At this point, replacement is an out-of-pocket investment that protects your home and eliminates a known risk that could complicate insurance coverage or home sales down the road.
Local Resources
Other Services we provide in Cameron Park
