Hear from Our Customers
You stop wondering when the next leak will hit. Your water pressure stabilizes. Your insurance company stops flagging your policy.
Kitec pipes aren’t just aging—they’re failing by design. The brass fittings contain over 15% zinc, which corrodes from the inside out. That’s not a maintenance issue. It’s a countdown.
Homes built between 1995 and 2007 in the Meyers area are hitting the failure window right now. The class action settlement is closed. Insurance companies won’t cover the replacement, and many won’t even renew policies until the system is out. You’re looking at a problem that gets more expensive the longer you wait.
A full Kitec repipe in Meyers, CA means pulling out every compromised line and replacing it with either PEX or copper. You get consistent water pressure, no more pinhole leaks, and a plumbing system that actually works the way it should. Most importantly, you eliminate the risk of a catastrophic burst that floods your home while you’re at work or out of town.
We’ve been handling residential and commercial Kitec repiping in Meyers, CA and throughout the Lake Tahoe region since day one. We know the local building codes, the permit process, and what it takes to get a full repipe done right in mountain conditions.
We’re licensed (CA #916322), insured, and we show up when we say we will. Our pricing is transparent before we start, and we’ve built a 4.7-star Google rating from 93 customers who needed their plumbing fixed right the first time.
El Dorado County has its own quirks—weather extremes, seasonal property use, and older infrastructure. We’ve worked in enough homes around Meyers to know what to expect when we open up your walls, and we handle the entire project from permits to final inspection.
We start with an inspection of your current system—where the Kitec lines run, what’s in your walls or slab, and what replacement material makes the most sense for your home. Most residential Kitec repiping projects in Meyers, CA use PEX because it’s flexible, durable, and handles temperature swings better than rigid pipe.
Once we map out the scope, we give you an upfront price. No surprises, no “we’ll see when we get in there” pricing. We pull permits with the local building department, schedule the work around your availability, and coordinate inspections.
The actual repipe involves shutting off your water, removing the old Kitec lines, and running new pipe through your home. Depending on the size of your property, this usually takes a few days. We patch and finish any drywall or access points we open, and we don’t leave until your water is back on and everything passes inspection.
You’ll have reliable water pressure, no more corrosion concerns, and a system that insurance companies won’t red-flag. If something does go wrong down the line, you’re covered by warranty—not hoping a 20-year-old pipe holds together one more season.
Ready to get started?
A full Kitec repipe in Meyers, CA covers every compromised line in your home—hot and cold water supply, pipes in the slab, attic runs, and anything hidden behind walls. We remove all Kitec fittings and replace them with code-compliant materials that won’t corrode or fail prematurely.
You get new shut-off valves, updated connections to fixtures, and a system that’s built to last. We handle all permit applications, coordinate with El Dorado County inspectors, and manage the entire project so you don’t have to chase down approvals or worry about code compliance.
Meyers sits in the Sierra foothills where freezing temperatures and seasonal use can stress plumbing systems. We account for that when we design your replacement—proper insulation, strategic routing, and materials that hold up in mountain conditions. Whether you’re a year-round resident or managing a vacation property, your new system is built for the environment it’s in.
We also offer 24/7 emergency service if your Kitec system fails before we can replace it. Burst pipes don’t wait for business hours, and neither do we. Our response time is typically same-day, and we’ll stabilize the situation while we plan the full repipe.
Most residential Kitec repiping projects in Meyers, CA run between $5,000 and $30,000 depending on the size of your home, how many bathrooms you have, and whether your pipes are in the slab, attic, or walls. A typical 1-3 bedroom home with standard access usually falls in the $8,000 to $15,000 range.
The price includes removing all Kitec lines, installing new PEX or copper pipe, updating shut-off valves, patching drywall, and handling permits and inspections. We give you a fixed price upfront based on a walkthrough of your property, so you know exactly what you’re paying before we start.
Some customers are surprised when the final bill comes in lower than the estimate—that happens when we find better access or fewer complications than expected. We don’t pad the quote to cover worst-case scenarios, and we don’t charge extra for things we should have anticipated in the first place.
Most insurance companies won’t cover the cost of replacing Kitec pipes because they consider it a known defect, not sudden damage. They may cover water damage if a pipe bursts, but they won’t pay to remove the system before it fails.
What insurance will do is penalize you for keeping Kitec in your home. Some carriers increase your premiums, raise your deductible, or exclude water damage coverage entirely if they know you have Kitec plumbing. In some cases, they’ll refuse to renew your policy until the system is replaced.
If you’re trying to sell your home in Meyers, CA, buyers will ask about Kitec during inspections. It shrinks your buyer pool and gives them leverage to negotiate a lower price or demand you replace the system before closing. The class action settlement deadline passed years ago, so there’s no financial recovery available—you’re covering this out of pocket either way.
A complete Kitec repiping project in Meyers, CA typically takes 3 to 5 days for a standard single-family home. Larger properties or homes with difficult access can take longer, but most residential jobs are done within a week.
Day one usually involves shutting off water, opening access points, and starting the removal of old Kitec lines. Days two and three focus on running new pipe and making connections. The final day or two cover pressure testing, inspections, and finishing any drywall or cosmetic work.
You’ll be without water during active work hours, but we can usually restore partial service overnight if needed. We coordinate with your schedule and keep the disruption as minimal as possible. Once the new system is in and inspected, you’re done—no follow-up visits, no waiting for parts, no lingering issues.
Most Kitec repiping projects in Meyers, CA use PEX because it’s flexible, freeze-resistant, and holds up well in the temperature swings common in the Sierra foothills. PEX doesn’t corrode, it’s faster to install, and it costs less than copper without sacrificing durability.
Copper is a solid choice if you prefer traditional materials or if local code requires it for certain applications. It’s more expensive and takes longer to install because every joint needs to be soldered, but it’s proven and reliable.
For mountain properties around Meyers, PEX has a clear advantage—it can expand slightly if water freezes inside, which reduces the risk of burst pipes during cold snaps. Copper is rigid and more vulnerable to freeze damage if a section isn’t insulated properly. We’ll walk you through both options during your consultation and recommend what makes sense for your home and budget.
Low water pressure is usually the first sign—Kitec fittings corrode from the inside, narrowing the pipe opening and restricting flow. You might notice it takes longer to fill a sink or your shower pressure has dropped over the past few years.
Visible leaks around fittings, discolored water, or frequent pinhole leaks in your supply lines are all red flags. If you’re patching leaks more than once a year, the problem isn’t bad luck—it’s systemic failure. Kitec pipes don’t get better with age, and repairs are just buying time.
Even if you don’t have active leaks yet, the age of your system matters. Homes built between 1995 and 2007 in Meyers, CA are in the failure window right now. Kitec’s defects are universal, so it’s not a question of if your pipes will fail—it’s when. Replacing the system before it bursts saves you from emergency repairs, water damage, and the chaos of dealing with a flooded home on short notice.
Yes. We pull all necessary permits with El Dorado County, schedule inspections, and make sure your Kitec repiping project in Meyers, CA meets local building codes. You don’t have to deal with the county or track down approvals—we handle that as part of the job.
Permit requirements vary depending on the scope of work, but a full repipe almost always requires inspection. We know what the county is looking for, and we’ve been working with local inspectors for over two decades. That means fewer delays, no failed inspections, and no surprises during the final walkthrough.
Once the project is complete and signed off, you’ll have documentation showing your plumbing system is up to code. That’s important for resale value, insurance coverage, and your own peace of mind. If a future buyer or insurance adjuster asks about your plumbing, you’ll have the paperwork to prove it was done right.
Local Resources
Other Services we provide in Meyers
