Hear from Our Customers
Water pressure stays consistent when you’re running the shower and the dishwasher. No more temperature spikes that make you jump in the middle of rinsing off. You stop wondering if today’s the day a pipe bursts behind your wall.
That’s what happens when you replace Kitec with modern copper or PEX systems. The fittings don’t corrode. The pipes don’t crack without warning. You’re not dealing with emergency floods, ruined drywall, or mold remediation bills that run into five figures.
Most residential Kitec repiping projects in Penryn take three to five days. Water service is typically available each evening, so you’re not completely disrupted. Once it’s done, you’ve got decades of reliable plumbing and a home that’s actually insurable without Kitec-related exclusions.
We’ve been handling residential and commercial plumbing in Penryn and throughout Sacramento and El Dorado counties for over 24 years. We’ve repiped homes built in the late 90s and early 2000s when Kitec was everywhere. We know exactly where builders ran those lines and which fittings fail first.
Penryn’s housing stock includes plenty of properties from that era. The median home value here sits between $563K and $963K. That’s a significant investment to protect, and Kitec is a ticking clock.
We’re licensed, insured, and locally owned. Our pricing is transparent—you get an exact cost upfront, and we stick to it. No surprise charges when we open your walls. We show up on time, do the work right, and make sure you understand what’s happening at every step.
First, we do a full assessment of your plumbing. We locate every Kitec line—hot, cold, and any branch lines running to fixtures. You’ll know exactly what needs replacing before we start any work.
Next, we map out the new system. Depending on your home’s layout and your preferences, we’ll use either copper or PEX. Both are durable, code-compliant, and won’t fail the way Kitec does. We explain the differences so you can make an informed choice.
Then we start the repipe. We work methodically through your home, removing old Kitec lines and installing the new system. Most homes in Penryn take three to five days. We coordinate with you to minimize disruption—water is usually back on each evening so you can use your kitchen and bathrooms.
After installation, we pressure test everything to confirm there are no leaks. We patch and repair any drywall or access points we opened. You’re left with a fully functional, reliable plumbing system that you won’t have to worry about for decades.
Ready to get started?
A full Kitec repiping project means replacing every inch of Kitec in your home—not just the sections that are leaking right now. That includes hot and cold water lines, supply lines to fixtures, and any branch lines. Half measures don’t work. If you leave Kitec in your walls, it’s still going to fail.
In Penryn, most homes were built in the 1960s or the 2000s. If your home was built or remodeled between 1995 and 2007, there’s a strong chance you’ve got Kitec. The failure rate is high enough that it’s not if, but when those pipes will crack. Insurance companies know this—they apply higher deductibles for Kitec-related damage and often treat it as a pre-existing condition.
We handle the entire project from start to finish. That includes removing the old system, installing new copper or PEX lines, pressure testing, and repairing any drywall or access points. We also coordinate inspections if your local building department requires them. You get a complete, code-compliant system that adds value to your property and eliminates the risk of catastrophic water damage.
The cost depends on your home’s size, layout, and how much Kitec needs replacing. Most residential repiping projects in Penryn range from $4,000 to $15,000. That includes labor, materials, and drywall repair.
Larger homes with multiple bathrooms or complex plumbing layouts cost more. Homes with easier access to plumbing lines cost less. We provide a free estimate after assessing your property, and the price we quote is the price you pay—no surprise charges once we start.
Here’s the reality: waiting usually costs more. A single Kitec pipe burst can cause $10,000 to $50,000 in water damage, mold remediation, and repairs. Insurance often won’t cover the full cost because Kitec is a known defect. Replacing it now is cheaper than dealing with an emergency later.
Most residential Kitec repiping projects take three to five days. Smaller homes or condos might be done in two days. Larger properties with multiple stories or complex layouts can take up to a week.
We work efficiently, but we don’t rush. You’ll have water service available most evenings, so you can still use your kitchen and bathrooms. We coordinate the schedule with you upfront so you know what to expect.
The timeline also depends on whether we need to open walls to access plumbing lines. In most cases, we do. We patch and repair any drywall we open, but if you want a specific finish or paint match, that might add a day or two to the project.
Both copper and PEX are reliable, long-lasting materials that won’t fail the way Kitec does. Copper has been the standard for decades—it’s durable, antimicrobial, and holds up well in high-temperature applications. PEX is newer but equally reliable, and it’s more flexible, which makes installation faster and less invasive in some homes.
Copper costs more upfront, but it’s a proven material with a long track record. PEX is more affordable and easier to install in tight spaces or homes with complex layouts. Both are code-compliant in California.
We’ll walk you through the pros and cons based on your home’s specific needs. If you’ve got an older home with limited access to plumbing lines, PEX might make more sense. If you prefer traditional materials and don’t mind the higher cost, copper is a solid choice. Either way, you’re getting a system that will last 50+ years.
Kitec pipes are usually marked with “Kitec” or “XPA” on the pipe itself. The pipes are often orange, blue, or gray, and the fittings are brass. If your home was built or remodeled between 1995 and 2007, there’s a good chance you have Kitec.
Check near your water heater, under sinks, or in your basement or crawl space. Look for flexible plastic pipes with brass fittings. If you’re not sure, we can do a quick inspection and confirm whether you’ve got Kitec in your system.
Even if you don’t see obvious signs, it’s worth checking. Kitec was widely used in new construction and remodels during that period, especially in the Sacramento and El Dorado County areas. If you’ve got it, you need to replace it. The failure rate is too high to ignore.
Most insurance policies don’t cover Kitec replacement as a preventive measure. They’ll cover damage from a pipe burst, but even then, coverage is often limited. Many insurers treat Kitec as a pre-existing condition and apply higher deductibles or exclude certain types of damage.
Some insurance companies won’t renew policies if they find out you have Kitec and haven’t replaced it. Others will increase your premiums or require you to replace the system within a certain timeframe.
The bottom line: don’t count on insurance to pay for a repipe. Budget for it as a necessary home maintenance expense, like replacing a roof or an HVAC system. It’s an investment in protecting your property and avoiding much larger costs down the road.
You can, but it’s not a good long-term solution. If one section of Kitec is failing, the rest of the system is aging at the same rate. Patching leaks buys you a little time, but you’ll be dealing with more failures soon.
The fittings are the weak point. They corrode from the inside out, and once that process starts, it doesn’t stop. You might fix one leak today and have another one next month. The cost of repeated repairs adds up quickly—often more than a full repipe would have cost in the first place.
If you’re planning to sell your home, partial repairs won’t help. Buyers and inspectors know what Kitec is, and they’ll either walk away or demand a price reduction to cover the cost of a full replacement. Replacing the entire system now protects your investment and eliminates the risk of ongoing problems.
Local Resources
Other Services we provide in Penryn
