Hear from Our Customers
You stop worrying about whether today’s the day your hot water line bursts and floods your house. That’s what replacing Kitec plumbing does—it removes the risk entirely.
Kitec pipes don’t give you a warning. They fail suddenly, often on hot water lines, and the damage can be catastrophic. We’re talking flooded rooms, ruined floors, mold growth, and repair bills that make the cost of Kitec pipe replacement look like pocket change.
When you’ve got a home worth over a million dollars in El Dorado Hills, CA, you don’t gamble with recalled plumbing. You get it replaced with materials that actually last—Type L copper or PEX-A—and you move on with your life knowing your investment is protected.
Insurance companies know the risk too. Some won’t even cover homes with Kitec anymore, and others jack up your premiums or deductibles. Replacing Kitec pipes isn’t just about avoiding a flood—it’s about keeping your coverage intact and your property value where it should be.
We’ve been handling plumbing emergencies and replacements across El Dorado Hills, CA for years. We’ve seen what happens when Kitec fails, and we’ve helped dozens of homeowners replace it before it becomes a disaster.
Your home was likely built between 1995 and 2007 if you’ve got Kitec. That’s the window when contractors installed it across Northern California, including right here in El Dorado Hills. Those pipes are aging out, and the failure rate keeps climbing.
We’re available 24/7 because Kitec doesn’t fail on a schedule. But ideally, you call us before that happens. We’ll assess your system, give you transparent pricing upfront, and get the job done in one to two days for most homes. No surprises, no runaround—just straight answers and solid work.
First, we come out and assess your plumbing system. We need to see how much Kitec you’ve got, where it’s installed, and what access points we’re working with. Every home in El Dorado Hills, CA is a little different, so the scope varies.
Once we know what we’re dealing with, we give you upfront pricing. No vague estimates or “we’ll see” numbers—you’ll know what it costs before we start. Most homeowners are surprised it’s less than they expected, especially compared to what a burst pipe and water damage would run.
The actual replacement usually takes one to two days. We shut off your water, remove the old Kitec piping, and install new copper or PEX-A lines throughout your home. We handle the drywall access if needed, and we coordinate any finish work so you’re not left with holes in your walls.
When we’re done, your plumbing is solid. You’ll have a system that’s built to last decades, not one that’s waiting to fail. And you’ll have peace of mind that your home—and everything in it—is protected.
Ready to get started?
You get a complete removal of the recalled Kitec system and a full installation of premium-grade materials. We use Type L copper or PEX-A tubing—both are proven, durable, and built to handle the water pressure and temperature fluctuations that made Kitec fail in the first place.
In El Dorado Hills, CA, where home values average over $1.1 million, you’re not just replacing pipes—you’re protecting a serious investment. Kitec plumbing replacement also keeps your insurance coverage intact, which matters more than most homeowners realize until they try to file a claim.
We handle everything from start to finish. That includes coordinating access to walls and ceilings, managing the installation timeline so you’re not without water for days, and making sure the finish work gets done right. Most jobs wrap up in a day or two, depending on the size of your home and how much Kitec needs to go.
You also get transparency. We’re not here to upsell you or drag out the job. We show up on time, do the work, and get out of your way. Our pricing reflects the actual scope of work, and in many cases, homeowners tell us the final bill came in lower than the original estimate.
Check your hot and cold water lines, usually in the basement, crawl space, or near your water heater. Kitec pipes are typically marked with “Kitec” or “KTC” on the pipe itself, and they often have blue and orange plastic fittings at connection points.
If your home was built or had plumbing work done between 1995 and 2007 in El Dorado Hills, CA, there’s a decent chance Kitec was used. It was popular with builders during that time because it was cheap and easy to install.
You can also look at the brass fittings. Kitec fittings are prone to dezincification, which makes them look corroded or discolored. If you’re not sure, call us. We can come out, take a look, and tell you exactly what you’re dealing with—no charge for the assessment.
Most homes run between $5,000 and $30,000 depending on size, layout, and how much Kitec needs to be replaced. A typical one-to-three-bedroom house usually falls in the lower to mid range of that estimate.
The cost includes removing all the old Kitec piping, installing new copper or PEX-A lines, handling any necessary drywall or ceiling access, and coordinating finish work. Larger homes or homes with complex layouts will cost more, but we give you the full breakdown upfront.
Here’s the thing—waiting until Kitec fails costs way more. Water damage from a burst pipe can easily hit $20,000 to $50,000 or more once you factor in repairs, mold remediation, and replacing damaged belongings. Replacing Kitec pipes now is the cheaper move, and it keeps your insurance coverage intact.
Most Kitec plumbing replacement jobs in El Dorado Hills, CA take one to two days. Smaller homes or simpler layouts might wrap up in a day, while larger homes with more complex plumbing systems can take a bit longer.
The timeline depends on how much Kitec you’ve got and where it’s installed. If we need to access pipes behind walls or in ceilings, that adds time. But we work efficiently, and we’re not here to drag out the job.
You’ll be without water during the work, but we coordinate the schedule so you’re not stuck for days. We’ll walk you through the timeline upfront so you know what to expect, and we’ll keep you updated if anything changes. Most homeowners are surprised how fast the whole process goes.
Probably not. Most insurance policies don’t cover the cost of replacing Kitec plumbing because it’s considered a maintenance issue, not sudden damage. Insurance is there to cover the damage after a pipe bursts, not to prevent it.
Here’s where it gets tricky—some insurance companies in California have started refusing coverage altogether for homes with Kitec, or they’ve raised premiums and deductibles significantly. If you file a claim for water damage and they find out you had Kitec, they might deny the claim entirely.
The deadline for the Kitec class action settlement has passed, so you can’t file for compensation anymore. That means the cost of Kitec pipe replacement comes out of your pocket. But it’s still cheaper than dealing with a flood, and it keeps your insurance coverage intact for everything else.
Kitec pipes fail because the brass fittings corrode from the inside out—a process called dezincification. The fittings weaken over time, especially when exposed to hot water, and eventually they crack or burst. The plastic pipes themselves can also degrade and become brittle.
The recall happened in 2005 after enough failures were documented to prove the system was defective. A $125 million class action lawsuit followed, and contractors were told to stop installing Kitec. But some kept using it through 2007, which is why homes built during that window are still at risk.
Kitec was installed across El Dorado Hills, CA during the building boom in the late ’90s and early 2000s. If your home was built or repiped during that time, you’re living with a system that’s aging out. The question isn’t if it’ll fail—it’s when. Replacing Kitec plumbing now removes that risk entirely.
You need to replace all of it. Leaving any Kitec in your system means you’re still at risk for failure, and you’re not solving the problem—you’re just delaying it.
Insurance companies and home inspectors don’t care if you replaced half the system. If there’s any Kitec left, it’s still a liability. That means your insurance issues don’t go away, and your home’s resale value stays affected.
A partial replacement also doesn’t make financial sense. You’re already paying for labor, access, and materials. Doing the job twice costs more in the long run than just handling the full Kitec replacement in El Dorado Hills, CA upfront. Get it all out, install a system that lasts, and move on knowing it’s done right.
Local Resources
Other Services we provide in El Dorado Hills
