Hear from Our Customers
If your Elmhurst home was built between 1995 and 2007, there’s a real chance you have Kitec plumbing. And if you do, the question isn’t if it will fail—it’s when.
Kitec pipes and fittings were recalled starting in 2005 because they leak, burst, and corrode. Some failed in under ten years. The $125 million class action settlement tells you everything you need to know about how serious this problem is.
Replacing Kitec plumbing in Elmhurst, CA means you stop waiting for disaster. You protect your home’s value, keep your insurance company happy, and sleep better knowing your walls aren’t hiding a ticking time bomb. Most Kitec replacement projects wrap up in just a few days, and you’re left with modern copper or PEX systems built to last decades—not fail before your mortgage is paid off.
We’ve spent over 24 years handling residential and commercial plumbing throughout the Sacramento region, including Elmhurst. We’ve seen what happens when Kitec fails, and we’ve helped dozens of homeowners replace it before the damage starts.
We’re not the biggest company in town, and we’re fine with that. Lower overhead means we can offer fair pricing without cutting corners. Our 4.7-star Google rating comes from showing up on time, doing the work right, and charging exactly what we quoted—sometimes less.
When you’re dealing with something as serious as replacing Kitec plumbing in Elmhurst, CA, you want someone who’s been around, knows the local housing stock, and won’t disappear after cashing your check. That’s us.
First, we come out and assess your system. We’ll confirm you have Kitec, figure out where it runs, and give you an upfront estimate before we touch anything. No surprises, no upselling.
Once you’re ready to move forward, we shut off your water and start removing the old Kitec pipes and fittings. Depending on your home’s layout, we may need to open some walls or ceilings to access everything. We replace it all with durable copper or PEX—your choice, based on your budget and preferences.
After the new plumbing is in and tested, we handle the restoration work. That means patching drywall, repainting, and leaving your home looking like we were never there. Most Kitec replacement projects in Elmhurst, CA take just a few days from start to finish, and you’ll have reliable plumbing that won’t keep you up at night.
Ready to get started?
You get a complete system replacement—not a patch job. We remove every bit of Kitec from your home and install new piping that meets current code. That includes all supply lines, fittings, and connections.
We also handle the messy part: opening walls, removing old materials, and then putting everything back together. You’re not left with gaping holes or half-finished drywall. We patch, tape, texture, and paint so your walls look normal again.
In Elmhurst and the broader Sacramento area, many homes from the late ’90s and early 2000s have Kitec hidden behind finished walls. It’s especially common in homes that were part of larger developments during that building boom. If you’re in one of those neighborhoods—near Florin Road, around Meadowview, or anywhere in South Sacramento—it’s worth checking.
You’ll also get transparent pricing before we start, a timeline you can count on, and access to our 24/7 emergency line if something goes wrong before we can schedule your full replacement. We’re local, licensed, and insured, so you’re covered from day one.
Most Kitec plumbing replacement projects in Elmhurst, CA run between $5,000 and $15,000. The final cost depends on your home’s size, how accessible your pipes are, and whether we’re replacing just the supply lines or the entire system.
Smaller homes with easy attic or crawlspace access tend to fall on the lower end. Larger two-story homes where pipes run through finished walls and ceilings cost more because there’s more labor involved in opening and restoring those areas.
We give you a free estimate upfront, so you know exactly what you’re paying before we start. No hidden fees, no surprise charges after the fact. And honestly, even if the number feels high, compare it to what a burst pipe and flooded home will cost you—not just in repairs, but in insurance headaches, lost belongings, and months of stress.
Check your water heater, under sinks, and in your attic or crawlspace. Kitec pipes are usually orange or blue, and the fittings are brass-colored. You might also see the words “Kitec” or “KTC” stamped on the pipes themselves.
If your home was built or renovated between 1995 and 2007, you’re in the high-risk window. Kitec was popular during that time because it was cheap and easy to install. Builders loved it—until it started failing.
Not sure? We’ll come out and check for free. It takes about 15 minutes to confirm whether you have Kitec, and then we can talk through your options. Don’t wait until you’re dealing with a leak to find out.
You can, but it’s not a long-term fix. The fittings fail first because of how the brass reacts with the chemicals in the pipe, but the pipes themselves degrade too. Replacing just the fittings buys you a little time—maybe a few years—but you’ll end up doing the full replacement eventually anyway.
Most homeowners who go the partial route regret it. You’re spending money twice, and you’re still living with the stress of knowing the rest of the system is on borrowed time.
If you’re already opening walls and paying for labor, it makes more sense to replace Kitec pipes in Elmhurst, CA completely and be done with it. You’ll have peace of mind, better insurance options, and a home you can actually sell without scaring off buyers.
Probably not. Most insurance companies won’t pay to replace Kitec as a preventive measure—they only cover damage after a failure happens. And even then, if they know you have Kitec and didn’t replace it, they might deny your claim or drop your coverage altogether.
Some insurers in California are starting to require disclosure if you have Kitec. If you don’t tell them and file a claim later, you could be out of luck. Others will still insure you but charge higher premiums or add a bigger deductible for water damage claims.
The smart move is to replace it now, on your terms, before you’re dealing with an emergency. Once it’s gone, your insurance situation gets easier, your premiums might drop, and you’re not gambling with tens of thousands of dollars in potential flood damage.
Most jobs take two to five days, depending on the size of your home and how much wall access we need. Smaller homes with straightforward layouts can be done faster. Larger homes with multiple bathrooms and complex plumbing runs take a bit longer.
We work efficiently, but we don’t rush. You’ll be without water during parts of the job, but we coordinate with you so it’s not a huge disruption. We also clean up daily and keep the work area as contained as possible.
Once the new plumbing is in and tested, we move on to drywall repair and painting. That’s usually another day or two. By the time we’re done, your home looks normal again—just with plumbing you can actually trust.
Call us immediately. We offer 24/7 emergency service, so even if it’s the middle of the night or a weekend, we’ll get someone out to shut off the water, assess the damage, and start temporary repairs.
Kitec failures can dump hundreds of gallons of water into your home in just minutes. The faster you stop the flow, the less damage you’ll deal with. After we stabilize the situation, we’ll walk you through the full Kitec replacement process so it doesn’t happen again.
Emergency calls obviously cost more than scheduled work, which is why we push homeowners to replace Kitec plumbing in Elmhurst, CA before it fails. But if you’re already in crisis mode, we’ll be there. That’s what we do.
Local Resources
Other Services we provide in Elmhurst
