Hear from Our Customers
You stop wondering if today’s the day your pipes burst. Kitec plumbing problems don’t announce themselves—they just fail, usually without warning, and flood your home with hundreds of gallons of water in minutes.
Replacing Kitec pipes in Sacramento, CA means you’re no longer paying inflated insurance premiums or dealing with carriers who won’t cover your home at all. It means buyers won’t walk away during inspections. It means your water pressure stabilizes, your water tastes better, and you’re not throwing money at temporary fixes every few months.
Most importantly, it means you’re protecting the equity in your home. Homes in Folsom, Roseville, Elk Grove, and Natomas with Kitec still installed are harder to sell and worth less. Full Kitec pipe repair eliminates that liability. You get peace of mind, better resale value, and a plumbing system that actually works the way it should—without the constant threat of catastrophic failure hanging over your head.
We’ve spent over 24 years working in Sacramento, Placer, and El Dorado counties—right where Kitec failures hit hardest. We’ve seen the damage firsthand in homes across Natomas, Elk Grove, Rancho Murieta, and Lincoln. We know which neighborhoods got hit with Kitec during the building boom, and we know what it takes to replace it the right way.
We’re a family-owned company with a 4.7-star Google rating built on showing up fast, pricing fairly, and doing the work right the first time. We don’t upsell. We don’t disappear after the estimate. We answer the phone at 2 a.m. because Kitec leaks don’t wait for business hours, and neither do we.
First, we inspect your entire system—not just the visible pipes. We use cameras to check behind walls, under slabs, and in crawl spaces to see exactly where your Kitec plumbing is and what condition it’s in. You get a full report and a transparent estimate before any work starts.
Then we map out the repipe. We replace every section of Kitec with copper or PEX—materials that won’t delaminate, corrode, or fail in ten years. We also replace the brass fittings, which fail just as often as the pipe itself. The process usually takes a few days, and you stay in your home the whole time. We work in sections so you’re never without water for long.
Once the new system is in, we pressure test everything, patch and paint the access points, and walk you through what we did. You’re left with a plumbing system that works better, lasts longer, and doesn’t put your home at risk every time you turn on a faucet.
Ready to get started?
A complete Kitec repair in Sacramento, CA means replacing all the pipe—hot and cold water lines—from your water heater to every fixture in your home. That includes the Kitec fittings, which are just as prone to failure as the pipe itself. We swap it all out for copper or PEX, depending on your home’s layout and your budget.
You also get new shut-off valves, updated connections at your water heater, and better water pressure throughout the house. For most homes in Sacramento, the cost runs between $5,000 and $30,000 depending on size, access, and how much drywall we need to open. That includes patching, texture, and paint—we don’t leave holes in your walls.
Homes built in the late ’90s and early 2000s in areas like Roseville, Rocklin, and Folsom are especially at risk. Kitec was popular here during the construction boom, and most of those systems are well past their ten-year lifespan. If you’re not sure whether you have Kitec, we’ll come out and check for free. It’s marked with blue and orange pipe, but it’s often hidden, so a full inspection is the only way to know for sure.
Kitec pipes are usually marked with blue (cold water) and orange (hot water) coloring, but they’re often hidden behind walls, in attics, or under slabs. You might see them near your water heater, under sinks, or in your crawl space.
If your home was built or remodeled between 1995 and 2007 in Sacramento, Folsom, Roseville, Elk Grove, or surrounding areas, there’s a good chance you have it. Builders used it heavily during that time because it was cheap and easy to install. The problem is that it started failing around 2005, and most systems only last about ten years before the pipe delaminates or the fittings crack.
If you’re not sure, call us. We’ll come out and do a full inspection with cameras if needed. It’s better to know now than to find out when a pipe bursts and floods your house.
For a full Kitec replacement in a one-to-three-bedroom home in Sacramento, you’re looking at somewhere between $5,000 and $30,000. That includes all the pipe, fittings, labor, and finishing work like drywall repair and paint.
The range depends on your home’s size, how accessible the pipes are, and whether we’re working with a slab foundation or a crawl space. Homes with more bathrooms, multiple stories, or limited access cost more because there’s more pipe to replace and more labor involved.
Waiting doesn’t make it cheaper. If your Kitec fails and floods your home, you’re looking at tens of thousands in water damage on top of the repipe cost. Insurance might cover some of it, but many carriers in Sacramento either won’t cover Kitec failures or they’ll hit you with a higher deductible. Replacing it now is the smarter financial move.
You can, but it’s a short-term fix. If one section of Kitec is failing, the rest of your system is right behind it. These pipes all age at the same rate, so patching one leak doesn’t stop the next one from happening in a few months—or a few weeks.
Kitec plumbing problems happen because the pipe itself is defective. The aluminum layer delaminates, the plastic cracks, and the brass fittings corrode. That’s not a localized issue—it’s systemic. Fixing one spot might buy you a little time, but you’re still sitting on a failing system that could go at any moment.
Most homeowners in Sacramento who try to patch Kitec end up spending more on repeated repairs than they would have spent on a full replacement. If you’re dealing with a leak, it’s worth getting an estimate for a complete repipe so you know what you’re really looking at.
Maybe, but don’t count on it. A lot of insurance companies in California either refuse to cover homes with Kitec or they charge higher premiums and apply special deductibles to any claims related to it. If you do file a claim after a Kitec failure, you might be looking at a much higher out-of-pocket cost than you expect.
Some policies will cover the water damage but not the cost of replacing the defective pipe. Others won’t cover anything if they know you have Kitec and didn’t replace it. The best move is to call your insurance company and ask directly what your policy says about Kitec plumbing.
Once you replace the system, most carriers will remove the special deductible or coverage restriction. That alone can save you hundreds of dollars a year in premiums. If you’re planning to sell your home, having Kitec replaced also makes it easier to get coverage for the buyer, which can make or break a deal.
Most Kitec replacements in Sacramento take between three and five days, depending on the size of your home and how much pipe we’re replacing. You can stay in your home the whole time—we work in sections so you’re never without water for more than a few hours at a time.
We’ll shut off water to specific areas while we’re working on them, then turn it back on before we leave for the day. You’ll have access to bathrooms, kitchens, and other fixtures for most of the project. The goal is to get it done fast without tearing your life apart in the process.
After the pipe is in, we pressure test the system, patch any drywall we had to open, and do basic texture and paint so it doesn’t look like a construction zone. If you want a specific paint match or custom finish work, that might add a day or two, but the plumbing itself is usually done within a week.
You’re gambling with your home. Kitec pipes fail without warning—no slow drip, no advance notice. One minute everything’s fine, the next minute you’ve got water pouring into your walls, floors, and ceilings. The damage adds up fast, and it’s not just cosmetic. You’re looking at ruined flooring, destroyed drywall, soaked insulation, and potential mold growth.
If the failure happens while you’re at work or on vacation, the damage gets exponentially worse. Hundreds of gallons of water can flood your home in a matter of hours. Even if insurance covers some of it, you’re still dealing with weeks of repairs, contractors in your house, and the headache of putting everything back together.
Beyond the immediate risk, keeping Kitec in your home hurts your property value. Buyers in Sacramento know what Kitec is, and they’ll either walk away or demand a price reduction to cover the cost of replacement. If you’re planning to sell in the next few years, replacing it now protects your equity and makes your home easier to sell.
Local Resources
Other Services we provide in Sacramento
