Hear from Our Customers
You stop worrying about coming home to a flooded house. Kitec pipes burst without warning, usually in hot water lines, and the damage spreads fast. Water soaks through drywall, ruins flooring, creates mold problems that cost tens of thousands to remediate.
After replacing Kitec plumbing in Cameron Park, CA, you get immediate peace of mind. Your water pressure improves noticeably because modern pipes don’t have the partial blockages and corrosion that plague aging Kitec systems. You eliminate the higher insurance deductibles that apply specifically to Kitec-related claims.
Your home becomes easier to sell. Some Cameron Park homeowners can’t close deals until they replace Kitec pipes, which means paying for the work anyway but under pressure and on someone else’s timeline. Getting it done now means you control the process, choose your contractor, and protect your property value before it becomes a negotiation problem.
We’ve worked in Cameron Park and El Dorado County for over 24 years. We’ve handled Kitec replacement in homes near Cameron Park Lake, in subdivisions off Highway 50, and throughout the neighborhoods that went up during the exact years Kitec was installed.
We know the local building codes, the soil conditions, and the specific challenges that come with repiping homes in this area. Our team has seen every type of plumbing configuration common to Cameron Park properties, which means fewer surprises and more accurate timelines.
You get upfront pricing before work starts. Our 4.7-star Google rating across 93 reviews reflects what matters most to Cameron Park homeowners: we show up on time, we do the work right, and the final bill matches what we quoted.
We start with an in-home assessment of your current system. You show us where you’ve noticed problems, we inspect the Kitec fittings and pipes, and we map out the full scope of what needs replacement. This usually takes about an hour, and you get a written estimate before we schedule anything.
Once you approve the work, we coordinate a start date that works for your schedule. Most Cameron Park Kitec replacement projects take two to four days depending on home size and pipe accessibility. We shut off water to specific areas as we work, so you’re not completely without plumbing the entire time.
We remove all Kitec pipes and fittings, install new copper or PEX lines based on what you choose, and test everything for leaks and proper pressure. We handle the final inspection with the county and provide you with all documentation. You get reliable water pressure and clean water immediately, with warrantied plumbing that lasts 50-plus years.
Ready to get started?
You get complete removal of all Kitec pipes and brass fittings throughout your home. We replace hot and cold water lines with either copper or PEX, depending on which material makes sense for your property and budget. Copper lasts 50-plus years and handles Cameron Park’s water chemistry well. PEX costs less, resists freezing better, and works great in homes with challenging layouts or crawl spaces.
We handle all permits and coordinate inspections with El Dorado County. You don’t chase down paperwork or deal with building department requirements. We patch and repair any drywall or access points we create during installation, leaving your walls ready for paint.
Cameron Park homes built between 1995 and 2007 are most likely to have Kitec systems, especially in neighborhoods that developed quickly during that period. Many of these homes are now hitting the failure point where Kitec pipes start breaking down from the inside. The brass fittings dezincify, the pipes develop pinhole leaks, and pressure drops noticeably.
We’ve replaced Kitec plumbing in Cameron Park properties ranging from 1,200-square-foot homes to 3,500-square-foot houses with complex multi-level layouts. The process is the same: remove everything that’s failing, install materials that won’t fail, and document everything properly so you have records for insurance and future buyers.
Most Cameron Park Kitec replacement projects run between $6,500 and $14,000 depending on your home’s size, how accessible the pipes are, and whether you choose copper or PEX. Smaller single-story homes with crawl space access typically cost less. Two-story homes with pipes running through walls and ceilings cost more because of the labor involved.
You’re paying for complete removal of every Kitec pipe and fitting in your house, installation of new supply lines, proper permitting, and final inspection. The price includes materials, labor, and any minor drywall repair needed to access pipes. It doesn’t include major remodeling or cosmetic work beyond basic patching.
We give you an exact quote after seeing your home. Square footage matters, but so does layout. A 2,000-square-foot single-level home is usually simpler and cheaper to repipe than a 1,800-square-foot split-level with pipes buried in interior walls.
Most Cameron Park Kitec replacement projects take two to four days of active work. Single-story homes with good access often finish in two days. Larger homes or properties with limited crawl space access might take four days. We’re not working around the clock, but we do work full days to minimize disruption.
You’ll have limited water access during work hours while we’re actively replacing pipes in specific areas. We coordinate with you so you can plan showers, laundry, and cooking around the work schedule. By the end of each day, we restore water service to as much of the house as possible.
The timeline also includes inspection scheduling. El Dorado County needs to inspect the work before we close up walls, which sometimes adds a day if inspectors are backed up. We handle all of that coordination, but it’s worth knowing that permits and inspections are part of the process and occasionally affect timing.
Both work well in Cameron Park, CA. Copper lasts longer, typically 50-plus years, and handles high temperatures without any concerns. It’s been the standard for decades, and most plumbers prefer working with it. Copper costs more upfront but gives you maximum longevity and resale confidence since buyers recognize it as premium material.
PEX costs less and installs faster, which can save you $2,000 to $4,000 on a full-house repipe. It’s flexible, so it works better in tight spaces and requires fewer fittings, which means fewer potential leak points. PEX also resists freezing better than copper, which matters if you have exposed pipes in unheated areas.
For Cameron Park homes, we typically recommend copper for main lines and areas where pipes are visible or easily accessible. PEX makes sense for complex routing, tight crawl spaces, or budget-conscious projects. You can also mix both: copper for hot water lines and PEX for cold water. We’ll walk you through the pros and cons based on your specific house layout and priorities.
Insurance typically doesn’t cover Kitec replacement itself, but it may cover damage caused by Kitec failures. If a pipe bursts and floods your home, your homeowner’s policy should cover the water damage, mold remediation, and repairs. However, many insurers apply higher deductibles specifically to Kitec-related claims, sometimes $5,000 or more instead of the standard $1,000 to $2,500.
Some insurance companies in California have started requiring disclosure of Kitec plumbing during policy applications or renewals. A few won’t insure homes with Kitec at all, or they’ll require replacement within a specific timeframe as a condition of coverage. This varies by insurer, so check your policy or call your agent.
The class action settlement against Kitec manufacturers closed in January 2020, which means you can’t file a claim for replacement costs anymore. You’re responsible for the full cost of replacing Kitec plumbing in your Cameron Park home. The good news is that once it’s done, you eliminate the insurance complications and the risk of denied claims if a failure happens.
Dropping water pressure is usually the first sign Cameron Park homeowners notice. You turn on the shower and it’s weaker than it used to be, or the washing machine takes longer to fill. This happens because Kitec pipes corrode from the inside, creating partial blockages that restrict flow.
Discolored water, especially yellow or brown tints when you first turn on a tap, indicates corrosion inside the pipes. The brass fittings in Kitec systems dezincify over time, which means the zinc separates from the brass and contaminates your water. You might also notice a metallic taste.
Visible leaks are the most obvious sign, but they’re also the most urgent. Kitec pipes often develop pinhole leaks that spray water inside walls before you see any exterior damage. By the time you notice a wet spot on drywall or ceiling staining, the leak has usually been active for days or weeks. If you see any moisture or water damage near plumbing fixtures, shut off your water and call for an inspection immediately.
Check the visible pipes in your water heater area, under sinks, or in your crawl space. Kitec pipes are usually orange or blue, sometimes gray. The orange pipes carried hot water, blue carried cold water. Look for the word “Kitec” printed directly on the pipe, along with “XPA” or “CSA B137.9” markings.
The brass fittings are another giveaway. Kitec systems used specific brass fittings that connect the plastic pipes. These fittings often have “KTC” stamped on them. If you see blue or orange plastic pipes connected with brass fittings that look slightly different from standard plumbing connections, you likely have Kitec.
Your home’s age is the biggest clue. Kitec was installed primarily between 1995 and 2007 in Cameron Park and throughout California. If your house was built or had plumbing work done during those years, there’s a strong chance you have Kitec. When in doubt, call us for a free inspection. We can identify Kitec systems quickly and give you a clear answer about what you’re dealing with.
Local Resources
Other Services we provide in Cameron Park
