Hear from Our Customers
If your home was built or renovated between 1995 and 2007, there’s a real chance you have Kitec plumbing running through your walls. And if you do, you’re living with a ticking clock.
These pipes weren’t pulled from the market because they worked well. They were recalled because the brass fittings corrode from the inside out—especially when exposed to hot water. That’s called dezincification, and it turns solid fittings brittle and weak until they crack or burst without warning.
You might not see it happening. But your insurance company probably knows about it. Some carriers in California won’t cover homes with Kitec at all. Others limit coverage or jack up your deductible. That’s not scare tactics—that’s just how they manage risk when the plumbing system has a documented failure rate.
Replacing Kitec plumbing in Mather, CA isn’t about overreacting. It’s about getting ahead of a problem that only gets worse with time. Once it’s done, you’re not just avoiding a flood—you’re restoring full insurance coverage, protecting your home’s value, and finally sleeping through the night without wondering if tonight’s the night a pipe lets go.
We’ve been serving Mather, CA and the surrounding Sacramento area for years with one consistent reputation: we show up on time, we do the work right, and we don’t play games with pricing. Our Google rating sits at 4.7 out of 5 stars across 93 reviews, and a lot of those mention the same things—professionalism, transparency, and costs that came in under the original estimate.
We’re licensed, we’re local, and we’ve handled enough Kitec replacement jobs to know exactly what your home needs. Mather’s housing stock includes plenty of properties built during that 1995–2007 window when Kitec was being installed across California. We’ve seen the damage these systems cause when they fail, and we’ve helped dozens of homeowners get them out before that happens.
You’re not getting a sales pitch here. You’re getting a straightforward conversation with people who know how to replace Kitec pipes the right way—and who’ll treat your home like it’s our own.
First, we come out and confirm whether you actually have Kitec. It’s usually marked with orange or blue piping, but not always. We’ll inspect your system, identify where it’s installed, and give you a clear scope of what needs to be replaced.
Once you’re ready to move forward, we schedule the work around your life—not ours. Most Kitec replacement jobs in Mather, CA take two to three days depending on the size of your home and how much of the system needs to come out. We shut off water to the areas we’re working on, remove the old Kitec piping and fittings, and install new copper or PEX lines that meet current California building codes.
If we need to open up walls or ceilings to access the pipes, we do. And when the plumbing work is done, we don’t just leave you with holes everywhere. We handle drywall patching and painting to get everything back to how it looked before we started.
You’ll have full water service restored as soon as the install is complete. No lingering issues. No “we’ll come back next week to finish.” Just clean, code-compliant plumbing that you can actually rely on.
Ready to get started?
This isn’t a patch job. When we replace Kitec pipes in Mather, CA, we’re pulling out the entire compromised system and replacing it with materials that won’t fail in ten years. You’ll get new copper or PEX piping installed throughout your home, all fittings replaced with code-compliant components, and a system that passes inspection the first time.
We also restore any drywall, texture, and paint that had to be removed during the process. That’s part of the service—not an add-on. You’re not hiring a plumber and then scrambling to find a contractor to close everything up. We handle it.
And because Mather sits in an area where insurance companies are increasingly aware of Kitec risks, you’ll walk away with documentation that proves your home no longer has the problem. That matters when you’re renewing coverage, selling your home, or just trying to get a reasonable premium. Homes in Sacramento County with outdated or recalled plumbing systems are facing real consequences from insurers, and replacing Kitec removes that liability entirely.
You also get a lifetime warranty on our replacement work. If something goes wrong with what we installed, we come back and make it right. No runaround.
Kitec piping is usually easy to spot once you know what to look for. The pipes are typically orange or blue, though sometimes they’re wrapped or hidden behind walls. You’ll often see them near your water heater, under sinks, or in the basement or crawl space if your home has one.
The fittings are brass and may have “Kitec” stamped on them, though not always. If your home was built or remodeled between 1995 and 2007, and you see plastic piping with brass fittings, there’s a good chance it’s Kitec. A lot of homes in Mather, CA were built or updated during that exact window, which is why we see it so often in this area.
If you’re not sure, we can come out and confirm it for you. It takes about ten minutes to identify, and there’s no charge for us to take a look and give you a straight answer.
Cost depends on the size of your home and how much Kitec piping needs to be replaced. Most jobs fall somewhere between $5,000 and $15,000. That includes removing the old system, installing new copper or PEX lines, and restoring any drywall or paint we had to touch.
We give you an upfront estimate before we start, and we don’t tack on surprise fees halfway through the job. Some of our customers have told us the final bill came in lower than the original quote, which happens when the scope turns out to be simpler than expected.
As for timing, most Kitec plumbing replacement projects in Mather, CA take two to three days. Larger homes or more complex layouts might take a bit longer, but we’ll tell you that upfront. We work efficiently and we don’t drag things out. You’ll have your water back on and your home put back together as fast as possible without cutting corners.
Insurance companies handle Kitec differently depending on the carrier and your policy. Some will cover damage caused by a Kitec failure—like a burst pipe and the resulting water damage—but they won’t pay to replace the system proactively. Others have started refusing to renew policies for homes with Kitec still installed, or they’ll agree to cover you but with a much higher deductible or limited water damage coverage.
In California, especially in areas like Mather and the greater Sacramento region, insurers are getting more aggressive about this. They know Kitec has a high failure rate, and they don’t want to be on the hook for a $50,000 flood claim when the problem was preventable.
The best move is to contact your insurance company and ask directly what their policy is on Kitec plumbing. If they’re putting restrictions on your coverage, replacing the system removes that issue entirely. You’ll have documentation proving the Kitec is gone, which usually restores your coverage to normal terms. And even if your insurer isn’t pushing you yet, replacing Kitec pipes now prevents the headache of dealing with it later when you’re trying to sell or refinance.
The fittings are the main problem, but replacing just the fittings doesn’t solve it. The Kitec system was designed as a package—the piping and the fittings work together, and when you start swapping out components, you run into compatibility issues. You also can’t always see which fittings are already compromised until they fail.
On top of that, insurance companies and home inspectors aren’t going to give you credit for a partial fix. If Kitec piping is still in your walls, it’s still a red flag. The only way to fully eliminate the risk and the insurance liability is to remove the entire system and replace it with modern materials like copper or PEX.
We’ve had homeowners ask about partial replacements to save money, and we get it—but it’s not a solution that holds up. You’re better off doing it once, doing it right, and never thinking about Kitec again. That’s what a full Kitec pipe replacement in Mather, CA gets you.
If a Kitec pipe bursts, you’re looking at an emergency situation. These pipes don’t leak slowly—they rupture. That means water flooding your home fast, often in areas that are hard to access or shut off quickly. Depending on where the failure happens, you could be dealing with soaked drywall, damaged flooring, ruined furniture, and even electrical hazards if water reaches outlets or appliances.
The first thing you need to do is shut off your main water supply. Then call us. We offer 24/7 emergency plumbing service in Mather, CA, and we’ll get someone out to stop the damage and assess what needs to be repaired. Once the immediate crisis is handled, that’s usually when homeowners decide to replace the entire Kitec system—because once one section fails, the rest isn’t far behind.
Your insurance may cover the water damage, but they won’t cover replacing the Kitec itself. And if they find out you knew you had Kitec and didn’t replace it, they might fight the claim. The smarter move is to replace Kitec plumbing before it fails. You avoid the damage, the stress, and the fight with your insurance company.
Because we’ve done this enough times to know what works, what doesn’t, and how to get it done without turning your life upside down. We’re not the cheapest option in town, and we’re not trying to be. You’re paying for licensed plumbers who show up on time, do the work right the first time, and don’t leave your home looking like a construction zone.
We’ve built our reputation in Mather, CA and the surrounding Sacramento area on transparency and reliability. That means upfront pricing, no surprise charges, and a lifetime warranty on the work we do. We also handle the full scope—plumbing, drywall, paint—so you’re not coordinating three different contractors to finish one job.
Our customers mention the same things in reviews: we’re professional, we’re punctual, and the final cost often comes in lower than the estimate. We’re available 24/7 if something goes wrong, and we treat your home with the same care we’d expect for our own. If you want a Kitec replacement contractor in Mather, CA who’s going to do it right and make the process as painless as possible, that’s what we’re here for.
Local Resources
Other Services we provide in Mather
