Hear from Our Customers
You stop wondering when the pipes will burst. That’s the first thing you notice after replacing Kitec plumbing in Meyers, CA—the worry disappears.
Your insurance company stops treating your home like a liability. Some insurers won’t cover homes with Kitec at all. Others charge more or add restrictions. Once you replace Kitec pipes with copper or PEX, that conversation changes completely.
Your home value stays protected. Buyers and their inspectors flag Kitec immediately. It kills deals or drops your price by thousands. Professional Kitec replacement in Meyers removes that obstacle before it costs you.
You’re not waiting for a catastrophe. Kitec doesn’t leak slowly—it bursts. When it fails, you’re looking at flooding, water damage, and emergency repairs that cost far more than planned replacement. Getting ahead of it means you control the timeline and the budget.
We’ve been replacing Kitec plumbing in Meyers and throughout El Dorado County for over 15 years. We know these systems inside and out because we’ve torn them out of dozens of homes just like yours.
Meyers sits in the heart of the area where Kitec was installed most heavily between 1995 and 2007. If your home was built or remodeled during that window, there’s a real chance you’re living with it. We’ve worked with homeowners here who didn’t even know they had Kitec until an inspector called it out or their insurance company asked.
We’re licensed, we’re local, and we show up when we say we will. Our pricing is transparent—some customers have paid less than we originally estimated because we don’t pad the numbers. When you need a Kitec replacement contractor in Meyers, CA, you need someone who’s done this work before and won’t disappear halfway through the job.
First, we inspect your entire plumbing system to map out where the Kitec is and what’s involved in removing it. You’ll know exactly what we’re replacing and why before we touch anything.
Then we remove all the Kitec—pipes, fittings, everything. We don’t leave any of it behind because even one old fitting can fail and flood your home. We replace it with either copper or PEX, depending on what makes sense for your house and your budget. Both materials are code-compliant and built to last decades longer than Kitec ever could.
Most Kitec replacement projects in Meyers, CA take two to three days, depending on the size of your home and how much piping needs to go. We work efficiently, but we don’t rush. You’ll have running water during the process—we don’t leave you without plumbing overnight.
Once the new system is in and tested, we walk you through what we did. You’ll have documentation for your insurance company and for future buyers if you ever sell. The job’s not done until you understand what you’re left with and why it’s better than what you had.
Ready to get started?
You get complete removal of every Kitec pipe and fitting in your home. Partial replacement doesn’t work—leaving even a section of Kitec means you’re still at risk. We pull it all out and replace it with materials that meet current code and won’t fail in ten years.
We install either copper piping, which can last up to 100 years, or PEX, which has a 75-year lifespan and costs less. Both are reliable. Both are insurable. We’ll explain the difference and let you decide what fits your situation.
In Meyers, CA, homes built in the late ’90s and early 2000s are the most likely to have Kitec. If you’re in that category, you’re also likely dealing with insurance questions. We provide documentation of the replacement that satisfies insurance requirements and protects your coverage. That paperwork matters when you’re trying to get reasonable rates or when you’re selling.
We also handle any drywall or access work needed to reach the pipes. If we have to open walls, we’ll patch them back up. You’re not left with holes and a mess. The goal is a complete job—new plumbing, clean finish, and peace of mind that your system won’t fail on you.
Look for orange and blue pipes, usually near your water heater or under sinks. Kitec pipes are marked with “Kitec” or “XPA” on the pipe itself, and the fittings are brass-colored. If your home was built or renovated between 1995 and 2007, the chances are higher.
You can also check your home inspection report if you have one—most inspectors call out Kitec specifically because it’s a known issue. If you’re not sure, we can come take a look. It takes about ten minutes to identify Kitec, and there’s no charge for us to tell you what you’re dealing with.
Some homeowners don’t find out until they’re selling and the buyer’s inspector flags it. By then, you’re negotiating under pressure. Better to know now so you can handle it on your terms.
Most full Kitec replacement projects in Meyers run between $5,000 and $15,000, depending on the size of your home and how much piping needs to be replaced. A smaller home with straightforward access costs less. A larger home with pipes running through multiple floors costs more.
We give you a clear estimate before we start, and we don’t add surprise charges halfway through. Some of our customers have paid less than the original estimate because the job turned out simpler than expected. That’s how it should work—you know what you’re paying before we begin.
Replacement costs less than dealing with a burst pipe and the water damage that follows. Insurance claims, repairs, and temporary housing add up fast. Replacing Kitec before it fails keeps you in control of the cost and the timeline.
Most Kitec replacement jobs in Meyers, CA take two to three days. Day one is usually removal and rough-in of the new piping. Day two is finishing the connections and testing the system. If there’s drywall work or a larger home, it might stretch to three days.
You’ll have water during the process—we don’t leave you without plumbing overnight. We shut off water only when we’re actively working on specific sections, and we restore it before we leave each day.
The timeline depends on how accessible your pipes are and how much Kitec is in your home. We’ll give you a realistic schedule during the estimate so you can plan around it. We’re not the crew that shows up for an hour and disappears for a week—we finish what we start.
Insurance usually won’t pay for Kitec replacement unless the pipes have already failed and caused damage. At that point, they might cover the water damage, but not the full cost of replacing the plumbing system. It’s considered a maintenance issue, not a sudden loss.
What insurance companies do care about is whether you have Kitec. Some won’t insure homes with it at all. Others charge higher premiums or add exclusions for water damage caused by plumbing failure. If you’re trying to get coverage or renew your policy, Kitec becomes a problem.
Replacing Kitec removes that obstacle. You’ll have documentation showing the old system is gone and the new plumbing is code-compliant. That keeps your insurance options open and your rates reasonable. It’s not covered, but it protects your ability to stay insured.
Kitec fails eventually—it’s not a question of if, but when. The pipes corrode from the inside due to a process called dezincification. The brass fittings break down, and the pipes themselves become brittle. When they fail, they don’t just leak—they burst.
You’re looking at flooding, water damage to floors and walls, and emergency repairs that cost more than planned replacement. If it happens while you’re away, the damage multiplies. Some homeowners have come back to thousands of dollars in water damage because a Kitec pipe let go while they were gone.
You also risk losing your homeowner’s insurance or paying much higher rates. Insurance companies know Kitec is a liability, and they treat it that way. If you’re trying to sell, buyers will either walk away or demand you replace it before closing. Waiting doesn’t save money—it just gives you less control over when and how you deal with it.
You can, but it doesn’t solve the problem. If you leave any Kitec in your home, you’re still at risk. One old fitting or one section of pipe can fail and flood your house just as easily as a full system.
Insurance companies don’t care if you replaced most of it—they care whether Kitec is still present. Partial replacement won’t change how they view your home or your coverage. Buyers and inspectors will still flag it during a sale.
The cost difference between partial and full replacement isn’t usually significant enough to justify leaving Kitec behind. You’re already opening walls and shutting off water—finishing the job completely means you’re done with it for good. Half-measures just delay the inevitable and leave you exposed in the meantime.
Local Resources
Other Services we provide in Meyers
