Hear from Our Customers
You’ll stop worrying about burst pipes and expensive repairs. Your appliances will last longer because they’re not getting hammered by excessive pressure every day. Your water bills will drop because you’re not wasting water through stressed joints and fixtures.
No more banging pipes at night. No more wondering if that leak is going to turn into a flood while you’re at work. Just steady, safe water pressure that keeps everything running the way it should.
The peace of mind alone is worth it. But when you factor in the money you’ll save on repairs and replacements, a water pressure regulator pays for itself fast.
We’ve been solving water pressure problems across Sacramento for over two decades. We’ve seen what high municipal pressure does to homes in this area, and we know exactly how to fix it.
We’re not the guys who show up and immediately start talking about full repiping jobs. We look for the most affordable solution that actually solves your problem. Most of the time, that’s a properly installed water pressure regulator.
As a family-owned business with low overhead, we keep our prices fair and our response times fast. When your plumbing needs attention, we treat it like it’s our own home.
First, we test your current water pressure using professional gauges. We check multiple points around your home to get the full picture of what’s happening with your system.
Next, we locate the best spot for installation—typically right after your main shut-off valve where the city line enters your property. We shut off your water supply, install the regulator, and make sure all connections are solid and leak-free.
Finally, we test the system thoroughly. We adjust the regulator to the optimal pressure for your home (usually 50-60 psi), turn your water back on, and check every connection. You’ll have steady, safe pressure throughout your house, and we’ll show you how to monitor it going forward.
Ready to get started?
Sacramento’s municipal water system delivers high pressure to ensure adequate flow to all neighborhoods, especially those at higher elevations. That means homes in areas like Carmichael, Fair Oaks, and parts of Sacramento proper often deal with 80-110 psi coming straight from the street.
Your home’s plumbing was designed for 40-60 psi max. Anything above 80 psi is considered dangerous and will cause damage over time. We install commercial-grade pressure regulators that bring that aggressive city pressure down to safe levels.
You get a complete pressure test, professional installation at the main line, and a system that’s built to last 10-15 years. We use quality regulators that can handle Sacramento’s variable pressure conditions and provide consistent protection for your entire plumbing system.
The easiest way is to buy a simple pressure gauge from any hardware store and attach it to an outdoor faucet. Turn off all water-using appliances and fixtures first, then open the faucet fully and check the reading.
If you’re seeing 80 psi or higher, you need a pressure regulator. But you might notice the problem before you test it—banging pipes, leaky faucets that you just can’t seem to fix, or appliances that seem to break down more often than they should.
Sacramento’s municipal system often delivers 90-110 psi to ensure adequate pressure throughout the distribution network. That’s great for the city, but it’s way too much for your home’s plumbing system to handle long-term.
High water pressure acts like a slow leak on your entire plumbing system. It puts constant stress on joints, fixtures, and appliance connections. Over time, this leads to leaks, burst pipes, and premature failure of water heaters, washing machines, and dishwashers.
You’ll also waste a lot of water. High pressure means more water comes out of every faucet and fixture than necessary. That shows up on your water bill every month.
The bigger issue is the potential for catastrophic failure. We’ve seen pipes burst in walls, flooding homes and causing tens of thousands in damage. A $400 pressure regulator installation could have prevented all of it.
Most installations take 2-3 hours from start to finish. We need time to properly test your current pressure, shut off the water supply, install the regulator at your main line, and thoroughly test the system afterward.
The actual installation is straightforward, but we don’t rush the testing phase. We want to make sure your new pressure is dialed in correctly and that all connections are solid before we consider the job complete.
If your main line setup is particularly complex or if we discover other issues during installation, it might take a bit longer. But we’ll let you know upfront if we see anything that could extend the timeline.
Most regulators have an adjustment screw that can be turned to increase or decrease pressure, but we don’t recommend homeowners mess with it. The adjustment is sensitive, and it’s easy to set the pressure too high or too low.
Too high, and you’re back to the same problems you started with. Too low, and you’ll have weak water flow throughout your house, which is just as frustrating as the original problem.
If you think your regulator needs adjustment, give us a call. We can test your pressure and make any needed adjustments quickly and safely. Most of the time, if a regulator that was working fine suddenly needs adjustment, it’s actually starting to fail and should be replaced.
For most Sacramento homes, you’re looking at $300-650 for a complete replacement, including the regulator and professional installation. The exact cost depends on your specific setup and the type of regulator that’s best for your situation.
We always provide free estimates, so you’ll know the exact cost before we start any work. As a local, family-owned business, we keep our overhead low and pass those savings on to our customers.
Remember, this isn’t just an expense—it’s an investment that prevents much more costly damage down the road. The money you save on avoided repairs and lower water bills usually pays for the regulator within the first year or two.
Quality regulators are pretty low-maintenance, but they’re not set-and-forget devices. We recommend having your pressure tested annually to make sure the regulator is still doing its job properly.
Over time, sediment and mineral deposits can affect how the regulator functions, especially with Sacramento’s hard water. If you notice pressure starting to fluctuate or increase, that’s usually a sign the regulator needs attention.
Most regulators last 10-15 years with normal use, but Sacramento’s variable municipal pressure can sometimes shorten that lifespan. The good news is that replacement is straightforward when you work with plumbers who know these systems inside and out.
Local Resources
