Hear from Our Customers
When your water pressure regulator works correctly, your daily life gets easier. No more banging pipes when you turn off the shower. No more shortened appliance lifespans from pressure stress. No more surprise leaks that flood your floors.
Your water bills drop because you’re not wasting water through excessive flow. Your dishwasher, washing machine, and water heater last years longer when they’re not fighting against dangerous pressure levels every day.
You get consistent, comfortable water pressure at every faucet and showerhead. The kind of steady flow that makes washing dishes efficient and showers actually relaxing instead of unpredictable.
We’ve been protecting Mather homes from water pressure problems for years. We understand the unique challenges that come with this area’s older homes and established neighborhoods built between the 1960s and 1990s.
Many Mather properties deal with galvanized pipes and plumbing systems that need specific attention when it comes to pressure regulation. We’ve seen how Sacramento County’s varying terrain can create pressure issues that damage appliances and waste water.
We respond quickly because we know water pressure problems don’t wait for convenient times. When your pressure regulator fails, it can cause immediate damage to your plumbing system and appliances.
First, we test your current water pressure using professional gauges to get accurate readings. We check pressure at multiple points to understand exactly what’s happening with your system.
Next, we locate your existing pressure regulator or determine the best location for installation. Most regulators install near your main water line, just after the shut-off valve where water enters your home.
We shut off your water supply and install or replace the regulator with proper fittings and connections. The new regulator gets set to the optimal pressure level for your home, typically around 50 PSI.
Finally, we test the entire system to ensure consistent pressure throughout your home and verify that all connections are secure and leak-free.
Ready to get started?
Your water pressure regulator service includes professional pressure testing, expert installation or replacement, and system optimization for your specific home. We handle everything from emergency repairs to planned installations.
In Mather, many homes experience pressure issues due to the area’s elevation changes and municipal water system design. Sacramento County’s water mains can deliver pressure up to 150 PSI, but your home’s plumbing works best between 40-65 PSI.
We install regulators that meet California Plumbing Code requirements and protect your investment. Your new regulator typically lasts 10-15 years with proper maintenance, and we warranty all our installation work.
Our service includes adjusting the regulator to your home’s optimal pressure level, explaining how the system works, and providing maintenance tips to help you avoid future problems.
Several clear signs indicate your pressure regulator needs attention. If you notice fluctuating water pressure throughout your home, that’s often the first warning sign.
Listen for banging or hammering sounds in your pipes when you turn off faucets or appliances. This “water hammer” happens when pressure isn’t properly regulated and can damage your plumbing over time.
Check for recurring leaks in faucets, toilets, or appliances like your water heater. High pressure puts constant stress on seals and connections, causing them to fail more frequently than they should.
California Plumbing Code requires water pressure between 15-80 PSI, but the ideal range for most homes is 40-65 PSI. Anything above 75 PSI starts causing problems with appliances and fixtures.
Mather’s municipal water system can deliver pressure up to 150 PSI due to elevation changes and system design. Without a pressure regulator, this excessive pressure will damage your plumbing and shorten appliance lifespans.
Most new pressure regulators come preset to 50 PSI, which works well for typical household needs. We can adjust this setting based on your home’s specific requirements and your family’s water usage patterns.
Water pressure regulator installation in Mather typically costs between $300-650, including the regulator and professional installation. The exact price depends on your home’s plumbing configuration and the type of regulator needed.
Basic residential regulators work for most homes, but larger properties or complex plumbing systems may require higher-capacity models. Emergency service calls outside normal business hours include additional fees.
The investment pays for itself through reduced water bills, fewer plumbing repairs, and longer appliance lifespans. A properly installed regulator can reduce your water usage by 25-30% while protecting expensive appliances from pressure damage.
Quality water pressure regulators typically last 10-15 years with proper maintenance. Some regulators function properly for 20 years, while others may need attention after just a few years depending on water quality and usage patterns.
Regular maintenance includes checking the pressure gauge periodically and having the system inspected if you notice pressure changes. Most regulators can be serviced with replacement parts rather than complete replacement.
Signs your regulator is nearing the end of its lifespan include inconsistent pressure readings, visible corrosion on the unit, or frequent need for pressure adjustments. We can evaluate your current regulator and recommend repair or replacement based on its condition.
While basic regulator replacement might seem straightforward, installation involves working with your main water line and requires specific knowledge of plumbing codes and proper techniques.
Incorrect installation can cause leaks, inadequate pressure regulation, or code violations that create problems when you sell your home. California Plumbing Code has specific requirements for regulator installation and positioning.
Professional installation ensures the regulator is properly sized, correctly positioned, and adjusted to your home’s optimal pressure level. We also test the entire system and provide warranty coverage on our work, giving you peace of mind that it’s done right.
Without proper pressure regulation, high water pressure will gradually damage every component of your plumbing system. Pipes develop leaks, fixtures wear out prematurely, and appliances fail years before they should.
Your water bills increase because excessive pressure wastes water through all your fixtures. High pressure also voids warranties on water heaters and other appliances, leaving you responsible for expensive replacements.
California Plumbing Code requires pressure regulators when incoming pressure exceeds 80 PSI, so you may face code compliance issues if you sell your home. Installing a regulator now prevents costly emergency repairs and protects your investment in your home’s plumbing system.
Local Resources
Other Services we provide in Mather
