Hear from Our Customers
Kitec plumbing wasn’t recalled because it might fail. It was recalled because it will fail. The fittings corrode from the inside out, and when they go, they don’t drip—they burst.
You’re looking at thousands in water damage. Ruined floors, soaked drywall, furniture that can’t be saved. Insurance companies in Loomis, CA know this, which is why some won’t even cover homes with Kitec anymore.
The average lifespan of Kitec plumbing is under 10 years. If your home was built or repiped between 1995 and 2007, you’re already past the expiration date. Placer County has seen more than its share of Kitec failures, and the question isn’t if your system will leak—it’s when.
Replacing Kitec plumbing problems now means you control the timeline, the budget, and the mess. Waiting means you don’t.
Murray Plumbing has been handling emergency plumbing in El Dorado and Placer Counties since the late ’90s. We’ve seen what happens when Kitec systems fail, and we’ve replaced enough of them to know what works.
You’re not getting a sales pitch. You’re getting a straight answer about what’s in your walls and what it’ll take to fix it. We show up on time, give you a fair estimate, and finish the job without surprises.
Loomis homeowners deal with hard water, older housing stock, and property values that demand real solutions. We get it. That’s why we don’t patch Kitec leaks—we replace the whole system with copper that’ll outlast the house.
First, we inspect your plumbing to confirm you’ve got Kitec. The pipes are usually orange or gray, and the fittings are brass. If it’s Kitec, we map out where it runs—hot water lines, cold water lines, water heater connections.
Then we give you a quote for complete replacement. Patching Kitec doesn’t work because the fittings aren’t made anymore, and even if we could find them, you’d just be delaying the inevitable. Full replacement with copper piping is the only real fix.
Once you approve the estimate, we schedule the work. Most Kitec water heater plumbing repair and full home repipes in Loomis, CA take one to three days depending on the size of your home and how accessible the pipes are. We shut off water to specific areas, remove the old Kitec, install new copper lines, test everything, and restore water service.
You’ll have functioning plumbing that won’t fail in five years. No more wondering when the next leak is coming.
Ready to get started?
Complete removal of all Kitec piping and fittings from your home. We don’t leave any of it behind because even one old fitting can fail and flood your house.
New copper pipe installation throughout your hot and cold water lines. Copper doesn’t corrode like Kitec, and it’s compatible with standard plumbing parts, so future repairs are simple and affordable.
In Loomis, CA, where the median home value is over $750,000, protecting your investment matters. A full Kitec plumbing services replacement also keeps your insurance valid. Some carriers in Placer County have started refusing coverage or hiking premiums on homes with Kitec still installed.
We handle everything—permits, inspections, cleanup. You don’t coordinate with the city or worry about code compliance. We do that. And if something comes up during the job, we tell you before we proceed, not after.
Full Kitec replacement typically runs between $4,500 and $15,000 depending on your home’s size, number of bathrooms, and how accessible your plumbing is. A two-bedroom, one-bath home with easy access sits on the lower end. Larger homes with multiple bathrooms and longer pipe runs cost more.
Piecemeal repairs don’t make financial sense. Kitec fittings aren’t manufactured anymore, so even if we could patch one leak, another fitting will fail soon after. Homeowners who try to repair Kitec one leak at a time often spend more than a full repipe would’ve cost.
We give you a transparent estimate upfront. No hidden fees, no surprise charges. And in many cases, the final bill comes in under the original quote because we don’t inflate numbers to cover our mistakes.
Most insurance policies won’t pay to replace Kitec plumbing as a preventive measure. They’ll cover water damage if a pipe bursts, but by then you’re dealing with flooded rooms, ruined belongings, and a mess that costs far more than the repipe would have.
Some insurance companies in Placer County are now refusing to insure homes with Kitec at all. Others will cover you but charge higher premiums because the risk of a sudden failure is so high. If you’re buying or selling a home in Loomis, CA, Kitec plumbing will come up during inspections, and it can kill deals or force price reductions.
Replacing Kitec before it fails keeps your insurance valid and your home insurable. It also protects your equity. A $750,000 home with known plumbing problems isn’t worth $750,000 anymore.
Check your water heater connections, under sinks, and in your basement or crawl space. Kitec pipes are usually bright orange or blue for hot water lines and gray or blue for cold water lines. The fittings are brass and often stamped with “Kitec” or “KTC.”
Kitec was installed in homes between 1995 and 2007, so if your Loomis home was built or repiped during that window, there’s a good chance you have it. The median construction year in Loomis is 1981, but many homes were updated in the ’90s and early 2000s when Kitec was commonly used.
If you’re not sure, call us. We’ll inspect your plumbing and tell you exactly what you’re dealing with. No charge for the assessment, and no pressure to commit on the spot. You’ll know what’s in your walls and what your options are.
You can, but it’s not a solution. Kitec fails because the brass fittings corrode from the inside. If one fitting has corroded enough to leak, the others are right behind it. Fixing one leak doesn’t stop the next one.
Kitec fittings also aren’t made anymore, so sourcing replacement parts is nearly impossible. Even if we find a fitting, it won’t be compatible with standard plumbing sizes, which means more custom work and higher costs for a temporary fix.
Homeowners who go the repair route usually end up calling us back within months for another leak. By the time they’ve patched three or four failures, they’ve spent more than a full replacement would’ve cost—and they still have Kitec in their walls. It’s not a matter of if the next leak happens. It’s when.
Most full Kitec replacements take one to three days depending on your home’s size and layout. A smaller home with accessible plumbing might be done in a day. Larger homes with multiple bathrooms, long pipe runs, or difficult access points take longer.
We work in sections so you’re not without water for the entire job. We’ll shut off water to specific areas, replace the piping, test it, and restore service before moving to the next section. You’ll have working plumbing in parts of your home while we finish the rest.
We also coordinate permits and inspections with Placer County, so you don’t have to deal with the city. Once the job is done, your plumbing is up to code, fully functional, and backed by a warranty. No more wondering when the next leak is coming.
Call us immediately. We offer 24/7 emergency service in Loomis, CA because Kitec failures don’t wait for business hours. We’ll shut off your water, assess the damage, and stop the leak as fast as possible.
Once the immediate crisis is handled, we’ll talk about full replacement. Emergency repairs buy you time, but they don’t fix the underlying problem. The rest of your Kitec system is still corroding, and another failure is likely within weeks or months.
Water damage from a burst pipe can run into the tens of thousands depending on what gets soaked. Floors, drywall, insulation, furniture—it adds up fast. Replacing Kitec before it fails costs a fraction of what you’ll spend cleaning up after a flood. And it’s a lot less stressful than dealing with a waterlogged house.
Local Resources
Other Services we provide in Loomis
