Hear from Our Customers
Most water damage doesn’t announce itself. It hides behind a wall, under a slab, or in a crawl space quietly building until you’re looking at a flooded floor and a five-figure insurance claim. A smart water leak detection system catches it before it gets there.
For Loomis homeowners, that risk is higher than most people realize. A significant share of homes in this area were built between the 1940s and late 1970s and those older copper and galvanized pipes don’t last forever. Add in the mineral buildup from Placer County Water Agency’s supply and the stress that foothill freeze-thaw cycles put on pipe joints every winter, and you’ve got a property that genuinely needs more than hope as a water protection strategy.
The other reality is that Loomis homes aren’t empty very often until they are. Whether you’re commuting down I-80 to Sacramento or heading up to Tahoe for the weekend, your home is sitting unattended. An automatic water leak detection system with a whole-home shutoff doesn’t require you to be there. The moment something’s wrong, the water stops and your phone gets an alert. That’s the difference between a minor repair and a gutted living room.
We’ve been serving Placer County including Loomis since 2009. Founded by Ryan Murray, a licensed C-36 plumbing contractor (CA License #916322, verifiable at CSLB.ca.gov), we built our reputation on showing up when we said we would, pricing jobs honestly, and not leaving until the work is actually done right.
Loomis isn’t a new market for us. We already work on water lines throughout this area including properties along Horseshoe Bar Road, the Eureka Road corridor, and custom homes in Basin Oaks and we understand what aging foothill infrastructure actually looks like from the inside. We know the pipe conditions, the water quality from PCWA, and the kind of properties that need more than a one-size-fits-all installation.
Our 4.7/5 Google rating comes from 93 real customers. The reviews consistently mention the same things: we show up, we’re upfront about cost, and the final number is usually at or below the original estimate. No estimate fees. No surprise charges. That’s just how we work.
The first thing we do is assess your main water line where it enters the home, what condition it’s in, and whether the existing infrastructure can support the new system without any issues. For older Loomis homes with aging copper or galvanized supply lines, this step matters. We’re not going to install a smart shutoff valve on a line that’s already compromised and call it a day.
Once we’ve confirmed everything is ready, we install the Moen smart water monitor on your main supply line after the water meter and pressure regulating valve, which is both the manufacturer requirement and the correct position for whole-home coverage. For properties with barns, outbuildings, irrigation manifolds, or guest structures, we’ll walk through additional sensor placement to make sure nothing falls outside your protection zone.
After installation, we set up the Moen Smart Water App directly on your phone, configure your alert preferences, and run a live test of the automatic shutoff before we leave. You’ll know exactly how to use it, what the alerts mean, and how to trigger a manual shutoff remotely if you need to. California requires a licensed C-36 contractor for plumbing work over $500 that’s us so the installation is done to code, documented, and ready if your insurance carrier asks for verification.
Ready to get started?
A water leak detector installation in Loomis, CA isn’t just about the device it’s about making sure the right device is sized correctly, placed correctly, and actually connected to something that works. That’s what separates a professional installation from a DIY attempt that leaves you with hardware and no real protection.
What’s included in every Murray Plumbing water leak detection system installation: a full assessment of your main supply line and existing plumbing condition, correct sizing and placement of the Moen smart water monitor, complete Moen Smart Water App setup on your smartphone, alert and notification configuration for your household, and a live shutoff test before we close out the job. If you have a horse property, irrigation system, detached garage, or outbuilding with its own water supply, we’ll discuss additional sensor placement so your whole property is covered not just the main house.
Loomis properties also tend to carry higher insured values than standard suburban homes, especially in areas like Basin Oaks and Placer Canyon. A documented smart leak detection system can qualify you for a 5–10% annual discount on your homeowners insurance premium through carriers like Mercury Insurance and Farmers Insurance. For a home insured at $800,000 or more, that’s real money and it can offset the cost of installation in the first year or two. Ask your agent before you schedule, then give us a call.
For a simple point-of-use sensor that sits on the floor near a toilet or under a sink, no permit is required. But a whole-home smart water leak detection system the kind that installs directly on your main supply line and controls water flow for the entire property is a different story. That’s a licensed plumbing installation, and California law requires a C-36 licensed contractor for any plumbing work exceeding $500 in combined labor and materials.
We hold CA License #916322, which you can verify at CSLB.ca.gov before you ever schedule a call. We install the system in compliance with local plumbing codes and Moen’s manufacturer specifications, which means the shutoff valve goes after the water meter and pressure regulating valve the correct position for whole-home coverage. If your insurance carrier or a future buyer asks for documentation, you’ll have it.
The total cost depends on your property’s size, the condition of your main supply line, and whether you need additional sensors for outbuildings or irrigation systems. For a standard single-family home in Loomis, a complete Moen smart water monitor installation including assessment, installation, app setup, and testing typically runs in the range of a few hundred to around a thousand dollars or more depending on complexity. Our service calls start at $175, and we provide upfront pricing before any work begins.
We don’t charge for estimates on major installations. You’ll know the number before we touch anything. And based on what our customers consistently report, the final cost frequently comes in at or below the original quote not above it. For Loomis properties on acreage with multiple water use points, we’ll walk through exactly what’s involved before giving you a number, so there are no surprises either direction.
Yes and in this area, it’s particularly well-suited for it. PCWA supplies treated surface water to Loomis and surrounding communities in Placer County, and while it meets all EPA standards, it does carry mineral content that builds up in pipe joints and fittings over time. That kind of slow, gradual degradation is exactly what a whole-home smart water monitor is designed to catch the low-flow leaks that develop quietly over weeks or months before they become visible damage.
The Moen smart water monitor installs on your main supply line and monitors flow patterns continuously. It learns your household’s normal usage and flags anomalies including the kind of small, steady drip that hard water-stressed fittings tend to produce. It’s compatible with standard residential water service, including PCWA supply lines, and doesn’t require any modifications to your meter or service connection. We’ve installed these systems throughout Placer County without any compatibility issues.
That’s actually the scenario this system is built for. When the Moen smart water monitor detects an anomaly whether it’s a sudden burst or a slow leak that’s been building it sends an immediate alert to your phone through the Moen Smart Water App. Depending on how you’ve configured your settings, it can also trigger an automatic shutoff of your main water supply without any action required on your part.
For Loomis homeowners, this matters more than it might in a denser suburb. If you’re commuting down I-80 to Sacramento or you’ve headed up to Tahoe for a long weekend, your home can go unoccupied for 10, 20, even 48 hours. A burst pipe or failed irrigation fitting during that window especially in winter when freeze-thaw stress is highest can cause tens of thousands of dollars in damage before you ever know something went wrong. The automatic shutoff closes that gap entirely. You get the alert, you see the shutoff confirmed in the app, and you call us when you’re ready to address the source.
A whole-home smart water monitor installed on your main supply line covers everything that runs off that line which, for most Loomis properties, includes the main residence, attached structures, and any water use that flows through the primary meter. For detached structures like a barn, a guest house on a separate meter, or an irrigation manifold that branches off independently, we’d discuss additional sensor placement during the assessment.
This is one of the most common questions we get from homeowners in the Loomis area, and it’s a legitimate one. Properties on an acre or more with horse facilities, outbuildings, and extended irrigation systems have a much larger water infrastructure footprint than a standard suburban home. The risk surface is bigger, which means the coverage strategy needs to account for it. We’ll walk through your full property layout before installation and make sure nothing critical falls outside your protection zone. The goal is real coverage not a device that protects the kitchen and leaves the rest of your property exposed.
It can, and for Loomis homeowners insuring higher-value properties, it’s worth asking your carrier about before you schedule installation. Smart water leak detection systems particularly whole-home monitors with automatic shutoff qualify for premium discounts with a number of California carriers. Mercury Insurance and Farmers Insurance both have active programs for California policyholders, and discounts typically range from 5–10% annually on the water damage portion of your premium.
For a home in Basin Oaks or along the Eureka Road corridor insured at $800,000 to $1.5 million, that discount can represent several hundred dollars per year and potentially recover the cost of installation within the first year or two. The key is documentation: your carrier will want confirmation that the system was professionally installed by a licensed contractor, which is exactly what we provide. CA License #916322, installed to code, with a completed job record. Call your agent first, get the specifics of what they require, and then call us. We’ll make sure the installation meets whatever documentation standard they’re asking for.
Local Resources
Other Services we provide in Loomis
