Hear from Our Customers
You stop wondering if today’s the day your pipes burst. That constant background worry about coming home to a flooded house disappears because the ticking time bomb in your walls is gone.
Your insurance company stops treating your home like a liability. Many carriers in Auburn, CA are denying claims or raising premiums on homes with Kitec plumbing because the failure rate is that predictable. New pipes mean you’re insurable again at normal rates.
Your home becomes sellable at full value. Right now, Kitec kills deals or forces price cuts because buyers know what they’re inheriting. After replacement with PEX or copper, that red flag vanishes from inspection reports and your property value reflects what your home is actually worth.
We’ve been handling Auburn’s plumbing emergencies for over 24 years. We’re the team with 93 Google reviews averaging 4.7 stars because we show up when we say we will and charge what we quoted.
Every plumber on our team carries proper licensing and insurance. When we give you a price for Kitec plumbing services in Auburn, CA, that’s the price you pay—even if the job takes longer than expected.
Auburn’s mix of older foothill homes and newer construction means Kitec shows up in unexpected places. We’ve seen it in 1990s builds near the historic district and 2000s developments closer to Highway 49. If your home was built or remodeled between 1995 and 2007, there’s a real chance Kitec is behind your walls.
First, we map your entire water supply system from the main line to every fixture. This tells us exactly how much Kitec pipe repair work your Auburn, CA home needs and where we’ll need wall or ceiling access.
Then we give you options. PEX is faster to install and costs less. Copper costs more upfront but some homeowners prefer it for resale value. We explain both, you decide what makes sense for your situation and budget.
During installation, we maintain partial water service whenever possible so you’re not completely without water for days. Most Auburn homes take 2-5 days depending on square footage and how accessible your plumbing is. We cut access points, remove all Kitec, install new supply lines, pressure test every connection, and patch walls back to smooth.
Before we leave, you get photos documenting the old Kitec and the new installation. If you’re filing an insurance claim for Kitec leak repair in Auburn, CA, this documentation matters. We also walk you through where your new shut-off valves are located in case you ever need them.
Ready to get started?
You’re not just getting new pipes. You’re getting a complete water supply system that meets current California plumbing code. That means proper support, correct fittings, and installation that won’t fail in five years.
Wall and ceiling access is part of the job. We cut what we need to reach the pipes, but we also patch, tape, and texture those areas back to smooth when we’re done. You’ll need to paint, but you’re not left with gaping holes.
In Auburn, CA, Kitec water heater plumbing repair often means replacing the supply lines running to your water heater along with the rest of the system. Those connections fail just as often as the main supply lines, and there’s no point leaving problem pipes in place when we’re already opening walls.
We also handle any permit requirements with El Dorado County. Most full Kitec replacements need permits, and we pull those as part of the job. You don’t have to figure out what the county wants or schedule separate inspections—we coordinate that.
Full Kitec replacement in Auburn typically runs between $5,000 and $15,000 depending on your home’s size and how accessible your plumbing is. A 1,200 square foot home with a crawl space costs less than a 2,500 square foot two-story where we’re cutting into finished ceilings.
The price includes removing all Kitec supply lines, installing new PEX or copper from your main line to every fixture, pressure testing the system, and patching access holes. If your home has Kitec in hard-to-reach areas or needs extensive wall work, that adds to the cost.
We give you an exact price after inspecting your home. That quote includes labor, materials, permits, and wall patching. If we find additional Kitec once walls are open, we talk to you before doing extra work. No surprise charges show up on your final bill.
Most insurance companies won’t cover the cost of replacing Kitec because they consider it a maintenance issue, not sudden damage. However, if your Kitec has already leaked and caused water damage, your policy may cover the damage itself—just not the pipe replacement.
Some Auburn, CA homeowners have seen their premiums increase or their coverage dropped entirely once their insurer discovers Kitec in the home. Insurance companies know these pipes fail predictably, and they don’t want the liability.
If you’re filing a claim for existing water damage from Kitec leak repair, detailed documentation helps. We provide photos of the failed pipes, the damage they caused, and the scope of necessary repairs. This gives your adjuster what they need to process your claim. But don’t expect insurance to pay for replacing Kitec that hasn’t failed yet—that’s on you.
Check your water heater connections, under sinks, and in your crawl space or attic. Kitec pipes are usually orange or blue, though some are gray. The fittings are brass and often stamped with “Kitec” or “KTC.”
If your Auburn, CA home was built or remodeled between 1995 and 2007, there’s a higher chance you have Kitec. It was popular with builders during that window because it was cheap and easy to install. Even some homes built after the 2005 recall have Kitec because contractors used up existing inventory.
You can also check your home inspection report if you bought recently. Most inspectors in El Dorado County flag Kitec when they see it because of the known failure issues. If you’re still not sure, we can do a quick inspection and tell you definitively what type of plumbing you have. That inspection costs nothing if you move forward with replacement.
Your pipes will fail. It’s not a maybe—it’s a when. Kitec’s brass fittings corrode from the inside due to a chemical reaction with the water. Once that corrosion starts, the fittings weaken and eventually burst under normal water pressure.
When Kitec fails, it doesn’t drip slowly and give you warning. It bursts suddenly, often when no one’s home. You come back to find inches of water covering your floors, soaked drywall, ruined belongings, and a massive cleanup job. Water damage from a burst pipe easily runs $10,000 to $30,000 depending on how long the water flowed.
In Auburn, CA, the dry summer heat can actually accelerate Kitec failure because temperature fluctuations stress the already-weakened fittings. Some homeowners think they can wait until they see a small leak, but by the time you see water, the damage is already happening inside your walls. Replacing Kitec before it fails costs less than dealing with the flood afterward.
Most Auburn, CA homes take between 2 and 5 days for complete Kitec plumbing services. A smaller single-story home with accessible plumbing might be done in two days. A larger two-story home where we’re working in tight spaces or cutting into multiple rooms takes closer to five.
The timeline depends on how much Kitec you have and where it’s located. If your supply lines run through an accessible crawl space, we move faster. If they’re buried in walls and ceilings throughout a finished second story, we need more time for careful access and proper patching.
We don’t leave your home without water for the entire job. We work in sections so you maintain partial service to at least one bathroom and your kitchen. By the end of each day, we restore water to as much of your home as possible. You’re not going days without being able to flush a toilet or wash your hands.
You can, but you’re just buying time until the next section fails. If one Kitec fitting has corroded enough to leak, the rest of your fittings are corroding too. They were all installed at the same time, exposed to the same water chemistry, and experiencing the same deterioration.
Replacing one section means you’ll pay for a plumber to come back in six months or a year when another fitting bursts. You’ll pay the service call, the emergency rate, and the repair cost multiple times instead of handling it all at once. Plus you’re living with the ongoing risk of sudden failure and water damage.
For Kitec pipe repair in Auburn, CA, full replacement makes more financial sense. You pay once, get it all done, and you’re finished worrying about it. The cost difference between patching one leak and replacing the whole system isn’t as big as you’d think—but the difference in reliability is massive.
Local Resources
Other Services we provide in Auburn
