Hear from Our Customers
Kitec plumbing replacement in Clay, CA isn’t about fixing a small leak. It’s about removing a system that was recalled for a reason and replacing it before you’re dealing with water damage, insurance headaches, and a home you can’t sell.
The brass fittings in Kitec pipes corrode from the inside out. You won’t see it happening until the pipe bursts, usually at the worst possible time. And when it does, you’re not just paying for new pipes—you’re paying for drywall, flooring, furniture, and whatever else got soaked.
Replacing Kitec plumbing now means you control the timeline, the budget, and the outcome. You upgrade to PEX or copper that’ll last decades. You restore your insurance coverage. You protect your home’s value. And you stop wondering if today’s the day something breaks.
We’ve been handling residential and commercial plumbing in Clay, CA and throughout Sacramento County since the late ’90s. We’ve seen what Kitec does to homes firsthand, and we’ve replaced enough of these systems to know exactly what you’re up against.
We’re not the cheapest option, and we won’t pretend to be. But we show up when we say we will, we give you a clear price before we start, and we don’t leave until the job’s done right. Our 4.7-star rating from 93 Google reviews reflects that consistency.
Clay sits in an area where the soil shifts and the water’s hard enough to accelerate corrosion. That combination makes Kitec fail faster here than in other parts of the country. We account for that when we plan your replacement, and we make sure the new system is built to handle local conditions.
First, we come out and confirm you actually have Kitec. The orange and blue pipes are easy to spot, but we also check the fittings and document everything so you know exactly what needs to go.
Then we walk through your home and map out the replacement plan. We’ll tell you whether we’re opening walls, how long the job will take, and what the final cost will be. No surprises, no upselling. Most Kitec replacement projects in Clay, CA take two to three days depending on the size of your home and how accessible the pipes are.
During the replacement, we remove every inch of Kitec—pipes and fittings—and install a new system using PEX or copper. We pressure test everything before we close up walls, and we make sure your water’s back on as quickly as possible. You’ll have a system that’s code-compliant, insurable, and built to last.
Ready to get started?
When we replace Kitec pipes in Clay, CA, we’re pulling out the entire system—hot and cold lines, fittings, everything. Partial replacements don’t work because the fittings fail just as often as the pipes. You need it all gone.
We install either PEX or copper depending on your home’s layout and your budget. PEX is flexible, faster to install, and handles Sacramento’s ground movement better than rigid pipe. Copper costs more but lasts longer and some homeowners just prefer it. We’ll explain the difference and let you decide.
Homes built in Clay and the surrounding Sacramento area between 1995 and 2007 are the most likely to have Kitec. If you’re in one of those neighborhoods near Folsom or Roseville, there’s a good chance your home’s affected. The moderately hard water here speeds up the zinc leaching process that causes the fittings to fail, so waiting isn’t doing you any favors.
After the replacement, you’ll have documentation showing the work was done to code. That matters when you go to sell, refinance, or file an insurance claim. It also means you’re not dealing with constant repairs or wondering when the next leak is coming.
Most Kitec plumbing replacement projects in Clay, CA run between $5,000 and $15,000 depending on the size of your home, how accessible the pipes are, and whether you’re replacing just the water lines or including fixtures. A 1,500-square-foot home with easy attic and crawl space access will cost less than a two-story home where we’re opening walls.
We give you an upfront price after we inspect your home and map out the work. That price includes removing all the Kitec, installing the new system, pressure testing, and closing up any access points we created. No hourly rates, no surprise charges.
The cost might feel steep, but compare it to what happens if a pipe bursts. Water damage from a single Kitec failure can easily hit $10,000 to $20,000 once you factor in drywall, flooring, and everything else that gets ruined. And most insurance companies won’t cover it because Kitec is a known defective material.
Most residential Kitec pipe replacement jobs take two to three days. Smaller homes with accessible plumbing might be done in a day and a half. Larger homes or properties where the pipes are buried in walls or concrete slabs can take four or five days.
The timeline depends on how your home is built and where the pipes are routed. If we can access everything from the attic or crawl space, the job moves faster. If we’re cutting into walls or ceilings, it takes longer because we’re patching and repairing as we go.
We’ll give you a clear timeline before we start so you can plan around it. Your water will be off during the workday, but we make sure it’s back on every night so you’re not without running water. We also clean up daily and keep the disruption as minimal as possible.
Most insurance companies won’t cover the cost of replacing Kitec plumbing because it’s considered a maintenance issue, not sudden damage. They know the pipes are defective, so they treat it like replacing an old roof—it’s your responsibility as the homeowner.
Where insurance sometimes helps is if a Kitec pipe bursts and causes water damage. But even then, many insurers apply higher deductibles for Kitec-related claims, and some will deny the claim entirely if they can prove you knew about the Kitec and didn’t replace it. Some companies won’t even insure homes with Kitec still in place.
The class action lawsuit against Kitec’s manufacturers settled in 2012 for $125 million, but the claim deadline has passed. If you didn’t file by 2020, that money’s gone. At this point, replacement is out-of-pocket, which is why it makes sense to do it before you’re also paying for water damage repairs.
Kitec pipes don’t always give you warning signs before they fail. The corrosion happens inside the brass fittings where you can’t see it, and the pipes can look fine right up until they burst. That’s what makes this system so risky.
If you do notice anything, it’s usually small leaks around fittings, reduced water pressure, or discolored water. The orange hot water pipes are more likely to fail first because they’re exposed to higher temperatures, which accelerates the zinc leaching process. But the cold water lines fail too, just on a slower timeline.
The bigger issue is that by the time you see a problem, the damage is already done. The fittings are compromised throughout your entire system, not just where the leak showed up. That’s why partial repairs don’t work—you’re just buying time until the next fitting fails.
You can sell a home with Kitec, but you’re required to disclose it, and it will affect your sale. Buyers either walk away, ask for a price reduction to cover replacement costs, or require you to replace the system before closing. None of those options work in your favor.
Real estate agents and home inspectors in the Sacramento area know what Kitec looks like, and they flag it immediately. Even if a buyer is willing to move forward, their lender might not approve the loan if the home has Kitec, and their insurance company might refuse to cover the property.
Replacing the Kitec before you list the home removes all of that friction. You’ll have documentation showing the work was done to code, and you can market the home with upgraded plumbing instead of a known defect. It’s a cleaner sale and a better return.
We’ve been doing this for over two decades, and we’ve handled enough Kitec replacements in Clay, CA and throughout Sacramento County to know what works and what doesn’t. We’re not learning on your home.
You’ll get a clear price before we start, and that’s the price you’ll pay. We don’t pad estimates or add fees once we’re halfway through the job. We also don’t disappear for days at a time—we show up when we say we will, and we finish the job in the timeline we gave you.
We’re licensed, insured, and locally owned. Our 4.7-star Google rating from 93 reviews reflects the kind of service we provide, and we’re available 24/7 if something goes wrong before you’re able to schedule the full replacement. You’re not just getting new pipes—you’re getting a company that’ll stand behind the work.
Local Resources
Other Services we provide in Clay
