Hear from Our Customers
Kitec pipes don’t just leak. They burst. And when they do, you’re looking at flooded rooms, ruined floors, and repair bills that climb into the thousands before you’ve even called your insurance company.
The question isn’t if your Kitec system will fail. It’s when. These pipes were installed throughout Campus Commons homes between the late 1990s and 2007, and they’re reaching the end of their lifespan right now.
You’ve probably noticed the signs already. Water pressure dropping in the shower. Small leaks that keep coming back. Maybe your insurance company mentioned higher deductibles for Kitec-related claims. That’s because they know what’s coming, and they’re protecting themselves.
Replacing Kitec plumbing before it fails means you control the timeline. You choose when the work happens, not your burst pipe. You avoid the emergency rates, the water damage, and the scramble to find someone who can help. You get modern copper or PEX pipes that will last 50-100 years, installed on your schedule, with full drywall repair and paint included.
We’ve been handling residential plumbing in the Sacramento area since the late 1990s. We’ve seen Kitec systems age, fail, and flood homes throughout Campus Commons, and we’ve replaced hundreds of them.
We’re a family-owned operation, which means lower overhead and fair pricing. Our Google rating sits at 4.7 out of 5 across 93 reviews because we show up on time, do the work right, and don’t surprise you with inflated bills at the end.
Campus Commons homes were built during the exact window when Kitec was being installed everywhere. Many of your neighbors have already made the switch. We know the layout of these properties, the access points, and how to complete a full repipe with minimal disruption to your daily routine.
First, we come out and give you a free estimate. We’ll inspect your current system, identify all the Kitec piping, and map out the replacement plan. You’ll get transparent pricing upfront, no vague ranges or surprise fees later.
Once you’re ready to move forward, we schedule the work at a time that works for you. Most Campus Commons homes can be fully repiped in one to two days. We shut off the water, remove all the old Kitec lines, and install new copper or PEX piping throughout your home.
After the pipes are in, we handle the drywall repair, texturing, and painting. You’re not left staring at holes in your walls or scrambling to find a contractor to finish the job. We take care of it, and we back the entire job with a lifetime warranty.
You get your water turned back on, your home restored, and peace of mind that your plumbing won’t fail when you’re at work or on vacation.
Ready to get started?
A complete Kitec plumbing replacement means removing every inch of the old system and installing new pipes that meet current code. That includes hot and cold water lines, supply lines to fixtures, and any piping hidden behind walls or under floors.
In Campus Commons, where most homes were built between 1970 and 1999, access can vary. Some homes have crawl spaces, others have slab foundations. We adapt to your home’s layout and find the most efficient path to replace the pipes without tearing apart more than necessary.
You also get full wall and ceiling restoration. We patch, texture, and paint any areas we had to open up during the repipe. The goal is to leave your home looking like we were never there, except for the fact that your plumbing actually works now.
Most Campus Commons homeowners spend between $5,000 and $15,000 on a full Kitec replacement, depending on the size of the home and how much access work is required. That’s a fraction of what you’d spend dealing with a catastrophic failure, water damage, and emergency repairs.
Kitec pipes are usually orange or blue, and the fittings are stamped with “Kitec” or the manufacturer name “IPEX.” Check under sinks, near your water heater, or in the crawl space if you have access.
If your home was built or renovated between 1995 and 2007, there’s a good chance Kitec was used. It was popular with builders in Campus Commons during that time because it was cheap and easy to install.
You can also look at your home inspection report if you bought recently. Many inspectors flag Kitec as a concern and recommend replacement. If you’re not sure, we’ll come out and check for free during your estimate.
Eventually, they’ll fail. The fittings corrode from the inside, the pipes weaken, and they burst without warning. You might get a small leak first, or you might come home to a flooded hallway.
Insurance companies know this, which is why many of them increase your deductible for Kitec-related claims. Some won’t cover the damage at all if they know you’ve been putting off the replacement.
The longer you wait, the higher the risk. And if a pipe bursts while you’re out of town, you’re looking at days of water damage before anyone even notices. Replacing the system now, on your timeline, is always cheaper and less stressful than dealing with an emergency.
Most homes can be fully repiped in one to two days. Smaller homes with easy access might be done in a single day. Larger homes or properties with limited crawl space access might take closer to two days.
We work efficiently, but we don’t cut corners. The goal is to get your water back on as quickly as possible without rushing the quality of the install.
During the work, your water will be shut off. We’ll let you know the timeline upfront so you can plan accordingly. Once the new pipes are in and tested, we turn the water back on and start the drywall repair. The painting and finishing work might add another day, but you’ll have running water again before that’s done.
Probably not. Most insurance policies don’t cover the cost of replacing defective materials, only the damage those materials cause. So if your Kitec pipes burst and flood your home, insurance might cover the water damage, but they won’t pay to replace the pipes themselves.
That’s why waiting for a failure to happen is such a bad strategy. You end up paying for the replacement anyway, plus dealing with all the damage, the higher deductible, and the headache of filing a claim.
Some homeowners have had luck getting partial coverage if they can prove the failure was sudden and unexpected, but that’s not something you want to count on. The safest move is to replace the system proactively and avoid the insurance conversation altogether.
We typically use copper or PEX, depending on your home’s layout and your preference. Copper is the traditional choice and lasts 50-100 years. It’s durable, reliable, and meets all current plumbing codes.
PEX is a flexible plastic pipe that’s become popular in repipes because it’s easier to route through tight spaces and less likely to freeze or burst. It also lasts 50+ years and costs a bit less than copper in most cases.
Both options are a massive upgrade over Kitec. We’ll walk you through the pros and cons of each during your estimate so you can make an informed decision. Either way, you’re getting a system that won’t corrode, leak, or fail the way Kitec does.
Most Campus Commons homeowners spend between $5,000 and $15,000 for a complete Kitec replacement, including all labor, materials, drywall repair, and paint. The final cost depends on the size of your home, how much piping needs to be replaced, and how accessible everything is.
Smaller homes with straightforward layouts tend to fall on the lower end. Larger homes or properties where we need to remove flooring or open up more walls will cost more.
We give you a transparent estimate upfront, and we stick to it. Some of our customers have told us the final bill came in lower than the original quote because the job went smoother than expected. We don’t pad estimates or surprise you with extra charges at the end. You’ll know what you’re paying before we start the work.
Local Resources
Other Services we provide in Campus Commons
